I have read for the last 2 days and still can't find solution. 1) I don't have any computer knowledge 2) I have win 2000 pro do not know much else about system except it was built by a friend quit awile ago 3)stop error 0x000007b (0x8168e7do,0xc0000032,0x00000000,0x00000000) Inaccessible_Boot_Device. 4) No new hardware has been installed. 5)I was on the net my system frooze up I powered off then on and BANG Blue Screen
After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.
My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.
Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies View RelatedI have a win2k server with an adaptec 2410 raid controller with sata drives.
Today I get a blue screen that says inaccessible_boot_drive when I try to restart the server. I was going to haul it down to my local computer shop as I need it back up quickly.
The other day on boot up I received an "lsass.exe error, invalid parameter" screen. Clicking "OK" just continued the boot up and error message in a loop. This has been a common problem for folks. Although I could not determine (due to the state of the system) if in was a virus or a corrupt file, I was finally able to coerce, after many varied attempts, an overlay install of XP Pro. However, all that was on my hard drive dissapeared (programs, settings, files).
Although, when I went to reinstall some items (Adobe Acrobat, for example) it stated that it was still resident on drive. Further, when I went to do a defrag, it stated that it was not needed (probably because of the small amount of recent installation) but the graph showed 20 gigs of space taken up (my original 18+ gigs and the new install). So, the original installed volume is still on the drive yet I can not see it or access it.
Insert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies View RelatedI was working on my computer, Windows 2000 Pro.I was moving my foot under the desk and accidentally switched off the surge protector.I turned the protector back on and restarted my computer.I get a royal blue screen that says Stop Error.Inaccessible Boot Device.None of the F8 options work for restart, they all say the same thing.I really don't want to have to reformat.
View 6 Replies View RelatedI gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies View RelatedI am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
when I remove an usb mass storage immediatly a blue screen shows up.Very short but I can now see that the message is IRQL_NOT_LESS_OR_EQUA.
View 6 Replies View RelatedHow can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies View RelatedIn Device Manager, under "Network Adapters", its got the following: Dlink Air plus which is my IE connection, and "Intel(R)PRO/100 VE Network Connection" - OK, I have tried to uninstall the Intel(R)PRO/100 VE Connection through the uninstall process the DM provides, but everytime I restart the computer, the system reinstalls it back on my system - I do not use the Intel(R)PRO/100 VE Connection Network, just the Dlink, and I am wondering if and how I can permenatly remove the intel PRO connection entirely from my computer, so that in my network connections, it will only show the Dlink and not the Intel Pro but also so that my computer won't detect the intel Pro upon restart and reinstall it again.
View 5 Replies View RelatedYou know, the small icon that appears in your taskbar when connecting a USB device? It no longer shows up, so now I have to go to Windows Explorer and click "Eject" directly on the USB device. How can I have this icon re-appear?It's the one that let's you select your USB device to "Safely remove device".
View 3 Replies View RelatedI am attempting to remove my DVD/RW from my Win XP Media Center CPU & install it in my Win2K system. However, I am told that the drivers for the device are "written specifically for XP," & I have had no success in making the device work. Does anyone have any advice or tips?
View 7 Replies View RelatedIs there anyway to see the BIOS boot order (1st CD, 2nd Floppy, 3rd HDD) through windows XP (possibly a registry key or something)? I ask because I need to make sure all of the computers in my department are set to HDD first and not CD incase they have a non-bootable CD in the drive and a power outage (or Windows Update) causes a reboot.don't want to goto every computer, and would like to do this all remotely.
View 2 Replies View RelatedI am adding a computer to my home network. All computers connect to the internet and each other through a wireless router, and belong to the same workgroup. All computers are Windows XP Pro SP2, except the new computer, which is XP Home SP2. A Firewall is enabled on all computers--the Windows firewall on the new computer, and Norton Worm Protection on the others.
If I run the Network Setup Wizard on the new computer, this completes successfully. But after rebooting, when I select View Workgroup Computers in Network tasks, I get a message saying that the workgroup is inaccessible.
I recently baught a new hard drive and intalled windows xp pro sp2 on it. I made 2 partitions on this drive, one for the system and on the other one (D) I put the majority of any user files I might have had (inc. mp3's, avi's, mpg's, jpg's, etc.). Everything was fine at first, and after a week or so, my D partition shows up on my computer but is inaccessible. I get "Disk is not formatted" whenever I try to access it.I have a lot of recordings on that drive that have no backup anywhere.
View 3 Replies View RelatedEither the taskbar on my laptop (2 user accounts [1 admin, 1 ltd.] + inactive Guest) doesn't respond on startup or the desktop (icons) doesn't (often I can get the taskbar to respond to the mouse by switching user accounts back and forth, but then I lose access to the desktop icons). This laptop is primarily used for playing dvd movies (WinDVD 3.1).
View 3 Replies View RelatedThe main problem is this; in reguard to the dvd drive: the shortcut for the destination you are trying to access is inaccessable. I have no cd/dvd drive icon in my computer and when I insert any cd/dvd into the drive, autorun does not take over from there. Toshiba tech support says its caused by a corruption of the windows files because I can get the ram image of the restore disk to show once windows is not attempting to access the drive. I'd like to learn how to resolve this issue without reloading windows entirely. I think it can be done, I mean there has to be a way to debug the system. I ran a hijack this scan, and below are the results of that scan.
View 14 Replies View Relatedokay I've been trying for the life of me to get my friends mp3 player to download songs onto the player.but for some reason after deleting the files (songs) that was already on there I get a memory error."mp3 explorer md-fd150, the disk media is not reconized, it may not be formatted, please format if you see this message again after connecting."I have no idea what this means because I'm using my Removable disk (H) with the USB cord to the mp3 player.
View 3 Replies View RelatedI haveWin XP Home SP2, and an ESS ES56H-PI Data Fax Modem.Unfortunately, over the week-end I completely screwed up my PC when trying to install a Linux O/S, and had to re-install Win XP - which I have successfully done. I am now re-installing my various applications,and have installed Win XP Fax using the same procedure as I used last November (Faxing in Windows XP by Sharon Crawford). Everything seemed to go OK, but when I try to send a fax I get an error message on the Fax Monitor: 'Fax device error'.
View 2 Replies View RelatedLet me preface this by saying I'm a fairly advanced user, a software developer by trade, and I've been digging through google and ms tech support pages trying to find a solution to this. The last time I used this machine it was on SP2. I gave it to my wife well over a year ago and have no idea when or IF SP3 was installed. Of course I don't have the OS disks anymore. She brought it to me yesterday with the dreaded BSOD. I can't be sure what triggered it. Maybe a failed SP3 install, maybe some Chemdraw trial software...I can't be sure.
So I acquired an XP SP3 disc and ran the repair. I got a new BSOD about some missing executable, which I was able to install in the recovery console after entering an empty password. That got me back to my original BSOD so no luck. So my theory is that maybe SP3 is the problem and procede to acquire an XP SP2 disc instead, which happened to be a Dell distribution disc, which was probably a bad idea, but it seemed to work as any other disc would. Now I get a new BSOD telling me I'm missing msvcrt.dll. Which makes sense because EVERY repair that I've done, regardless of disc or service pack, has been unable to copy msvcrt.dll AND msvcp60.dll. Although only after repairing to SP2, do I get the specific BSOD message that this file is missing....
My pc was running fine when it just started beeping like a warning klaxon. Rebooting didn't help, but rebooting into safe mode then normal mode did. Then 1 hour later while running spysweeper, I stopped the scan early because it was taking too long. It detected 1 adware and 1 trojan, but the log said the trojan (ruin) could not be quarantined and some threat was still in memory, despite a problem free pc except for the beeping which I thot was resolved. After exiting spysweeper
my pc locked up and could not be turned off manually, so I unplugged the cord in back. Then I got a blue screen after it tried rebooting. The bootup started normally, but then a blue screen read as follows, more or less-If this is the first time you are seeing this message reboot your pc. Otherwise check for viruses, remove any new hard drives or hard drive controllers. or refer to your startup manual. I can't even boot in safe mode.
I am trying to set the boot device for a thinkpad T23. Nothing is password protected. When the BIOS setup CDROM is top, with no + next to it, and followed by hardrive and them removable. HD and removable does have a + next to it. CD is bootable, why won't the thinkpad boot from the CDROM?
View 2 Replies View RelatedDoes anyone know how to bring up the option to boot from HDD1, HDD2, Floppy etc during the post or slightly after post?I know how to do it on DELL machines. Shift+F12. Well some of them, I won't claim I've used all Dell Systems..I'm running WinXPHome on an Asus MOBO.I've done it before, quite by accident I assure you.But since then I cannot duplicate the feature.BTW: I am not talking about booting into safemode, or the command prompt. This is the start-up menu, correct?
View 14 Replies View RelatedA friend of mine just got updates from Microsoft and then had to reboot...upon rebooting her system, she was told there was NO BOOT DEVICE AVAILABLE.She has the Dell Vostro 200 series, running WinXP. I had her go into the bios and her HD is the first device in the BOOT ORDER. What else can I try to correct this issue and what would have caused the WIN UPDATE to prevent the computer from booting up?
View 6 Replies View RelatedAfter a failed ubuntu install on my dell 4700 i restarted my computer to read the message"no boot device availale press f1 to retry"and im unable to boot manually, my guess is that i accidentally formated it.trying to boot off the disc with windows xp install on it gets the same message, due to my somewhat broken drive.what do i do...and i cant install ubuntu either.
View 2 Replies View RelatedI have a Windows XP PC dedicated to a machine that is constantly sending data via a serial port to the PC. When we power up the system the PC will sometimes think that the serial data coming in is a "new device" and installs it as a serial mouse. When the boot process is complete the PC runs a program from the Startup folder. When this program tries to open the serial port it is blocked by the "serial mouse" it thinks is there.
We have tried many things to prevent this problem. Disabling the mouse in Device Manager works for a while but eventually XP decides there is something wrong and does things like disable the COM port. We have tried disabling the Plug N Play services using MSCONFIG. This does not seem to prevent the detection of the "serial mouse" on boot up. We have a fixed set of hardware and software for this system that will never change. So I'd like to just disable all (or serial) device discovery on boot up. How is this done on XP?
I just changed cases for my computer and now when I start it you hear 1 beep (i have AMI BIOS) It then goes to what looks like a command and then the message Reboot or select appropriate boot device or insert boot media pops up. I have checked all my connections and tried it every which way. I have went inside and out of the BIOS and still no luck. I have also tried reinstalling Windows XP, but it says restart the computer and when I do it doesn't continue the installer. Instead it says reboot or select appropriate boot device or insert boot. I also get the error of Overclocking Error.I have a 2.79 Pentium 4 HyperThreading processor, ASUS P4S800D-X, ATI X800XL AGP, Tech-link 425w PSU, 3 sticks Kingston 512mb 333mhz PC3200 RAM, Samsung Spinpoint 120GB ATA hard drive, LG DVD-RW-DL burner, and a standard floppy.
View 1 Replies View RelatedI'm running a Windows XP home SP1 on a Pentium 4 2.79 GHz Toshiba laptop with a CD/DVD burner.A little while ago, I tried opening an audio CD (one purchased from a retailer) and the disc wouldn't read--I double clicked it from My Computer and it notified me of an I/O device error.Recently, I tried burning an audio CD (using Nero), but now blank media isn't being read either, and again, there is an I/O device error.
View 1 Replies View RelatedEvery time i try to access the the device manager from the system properties,i get and error.[IMG][/IMG] then i get this window [IMG][/IMG].
View 4 Replies View Related