Message Saying That The Workgroup Is Inaccessible.
Jun 21, 2005
I am adding a computer to my home network. All computers connect to the internet and each other through a wireless router, and belong to the same workgroup. All computers are Windows XP Pro SP2, except the new computer, which is XP Home SP2. A Firewall is enabled on all computers--the Windows firewall on the new computer, and Norton Worm Protection on the others.
If I run the Network Setup Wizard on the new computer, this completes successfully. But after rebooting, when I select View Workgroup Computers in Network tasks, I get a message saying that the workgroup is inaccessible.
View 1 Replies
ADVERTISEMENT
Aug 12, 2002
This would perform a somewhat similar task as winpopup does.1. Goto command prompt (to do this, click on the start menu and select run, then type in cmd)2.Type net send * (your message)Note: the * would send the message to all of the computeres in the same workgroup as you. To send the message to a specific computer, type in the computer's ip address.
View 9 Replies
View Related
Dec 10, 2005
I recently baught a new hard drive and intalled windows xp pro sp2 on it. I made 2 partitions on this drive, one for the system and on the other one (D) I put the majority of any user files I might have had (inc. mp3's, avi's, mpg's, jpg's, etc.). Everything was fine at first, and after a week or so, my D partition shows up on my computer but is inaccessible. I get "Disk is not formatted" whenever I try to access it.I have a lot of recordings on that drive that have no backup anywhere.
View 3 Replies
View Related
Jan 31, 2007
Either the taskbar on my laptop (2 user accounts [1 admin, 1 ltd.] + inactive Guest) doesn't respond on startup or the desktop (icons) doesn't (often I can get the taskbar to respond to the mouse by switching user accounts back and forth, but then I lose access to the desktop icons). This laptop is primarily used for playing dvd movies (WinDVD 3.1).
View 3 Replies
View Related
Oct 28, 2006
The main problem is this; in reguard to the dvd drive: the shortcut for the destination you are trying to access is inaccessable. I have no cd/dvd drive icon in my computer and when I insert any cd/dvd into the drive, autorun does not take over from there. Toshiba tech support says its caused by a corruption of the windows files because I can get the ram image of the restore disk to show once windows is not attempting to access the drive. I'd like to learn how to resolve this issue without reloading windows entirely. I think it can be done, I mean there has to be a way to debug the system. I ran a hijack this scan, and below are the results of that scan.
View 14 Replies
View Related
Apr 7, 2006
I have a win2k server with an adaptec 2410 raid controller with sata drives.
Today I get a blue screen that says inaccessible_boot_drive when I try to restart the server. I was going to haul it down to my local computer shop as I need it back up quickly.
View 9 Replies
View Related
Oct 7, 2007
I have read for the last 2 days and still can't find solution. 1) I don't have any computer knowledge 2) I have win 2000 pro do not know much else about system except it was built by a friend quit awile ago 3)stop error 0x000007b (0x8168e7do,0xc0000032,0x00000000,0x00000000) Inaccessible_Boot_Device. 4) No new hardware has been installed. 5)I was on the net my system frooze up I powered off then on and BANG Blue Screen
View 2 Replies
View Related
Dec 5, 2008
Let me preface this by saying I'm a fairly advanced user, a software developer by trade, and I've been digging through google and ms tech support pages trying to find a solution to this. The last time I used this machine it was on SP2. I gave it to my wife well over a year ago and have no idea when or IF SP3 was installed. Of course I don't have the OS disks anymore. She brought it to me yesterday with the dreaded BSOD. I can't be sure what triggered it. Maybe a failed SP3 install, maybe some Chemdraw trial software...I can't be sure.
So I acquired an XP SP3 disc and ran the repair. I got a new BSOD about some missing executable, which I was able to install in the recovery console after entering an empty password. That got me back to my original BSOD so no luck. So my theory is that maybe SP3 is the problem and procede to acquire an XP SP2 disc instead, which happened to be a Dell distribution disc, which was probably a bad idea, but it seemed to work as any other disc would. Now I get a new BSOD telling me I'm missing msvcrt.dll. Which makes sense because EVERY repair that I've done, regardless of disc or service pack, has been unable to copy msvcrt.dll AND msvcp60.dll. Although only after repairing to SP2, do I get the specific BSOD message that this file is missing....
View 6 Replies
View Related
Jul 6, 2005
I have just changed from a domain to a workgroup and now I can not log on. I wanted to share a library on my stationary PC with my wireless connected
laptop. After having established a new workgroup, confirming via my password and
restarting the laptop, I can't use the password anymore...What happened and what do i do to get reconnected?
View 3 Replies
View Related
Nov 5, 2007
I have a LAN at home with 4 computers on it. They are all in the same workgroup, and all except 1 work fine, but on 1 computer i have the following problems:If i click view workgroup computers, it says i do not have permission to acces it, even though i have my workgroup set the same as on the other 3 computers. If i type the name of another computer into explorer like this: \workPC it says it cannot find it, while on other 2 computers it works (and on the 3rd too of course, since that one is called workPC). Also remote desktop connection doesn't work if i type in workPC, but it works on the other 3 computers.
But the other 3 computers cannot see this 4th computer either, it doesn't show up when i click view workgroup computers. It's as if it wasn't in the workgroup, even though i've triple checked it and it's the same as on all other computers.I can, however, access all other 3 computers via IP, like \192.168.0.5 and such, and that works, it also works via IP for remote desktop connection.
The problem that bothers me most, though, is that i cannot remote desktop into this 4th computer, even though remote desktop is enabled and it should work. I can remote desktop to other 3 computers from this computer, but not the other way around. When i try to connect to it (via IP since it doesn't work via it's name), it asks me for the username and password. I enter those correctly, then i get a warning i always get (something about "Remote Desktop cannot verify the identitfy of the computer you want to connect to." (and so on)). After i click yes (*i want to connect anyway*), it just returns me to the window that asks you for the name of the computer to connect to, and that's it.
View 10 Replies
View Related
Jun 5, 2006
I have installed this OS on a new Fujitsu PRIMERGY TX150 S4. Now I want just to use this Server as a server on a Workgroup. But the OS insists that it should be the Domain Controller. And then it just shuts it self down. Below is a log from the event viewer. Just don't really want to configure the entire Lan from workgroup to Domain.
View 6 Replies
View Related
Mar 27, 2008
I cannot change the workgroup name at all. when I right click my computer, got to properties and click on the tab computer name. It does not show the network ID option and/or the mshome workgroup area is grayed out and I cannot change this option at all. I ran all updates and the machine is sp2. Can anyone please shed some light on this weak networking OS?
View 2 Replies
View Related
Oct 2, 2007
I've had no problem with my workgroup network until today...when Comcast installed a new Business Router/Modem. Since then, my main desktop is not part of my workgroup. Actually, other computers on the network can still see my desktop as part of the View Workgroup Computers...BUT when I try to access files on other computers that I've been able to all along, I can't....it says Workgroup Not Accessible.
View 1 Replies
View Related
Apr 3, 2004
I am trying to set up remote desktop but when I browse for computers, I
click on the network name then get the message ' the MSHOME domain/workgroup
does not contain any terminal servers.I have set up the XP pro machine to enable remote desktop.
View 11 Replies
View Related
Jan 16, 2006
The other day on boot up I received an "lsass.exe error, invalid parameter" screen. Clicking "OK" just continued the boot up and error message in a loop. This has been a common problem for folks. Although I could not determine (due to the state of the system) if in was a virus or a corrupt file, I was finally able to coerce, after many varied attempts, an overlay install of XP Pro. However, all that was on my hard drive dissapeared (programs, settings, files).
Although, when I went to reinstall some items (Adobe Acrobat, for example) it stated that it was still resident on drive. Further, when I went to do a defrag, it stated that it was not needed (probably because of the small amount of recent installation) but the graph showed 20 gigs of space taken up (my original 18+ gigs and the new install). So, the original installed volume is still on the drive yet I can not see it or access it.
View 2 Replies
View Related
Jan 31, 2005
After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.
My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.
Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
View 11 Replies
View Related
Jul 1, 2005
I'm looking for some kind of documentation or flowchart of the Startup and Logon procedure as well as information on what happens when a computer is joined to a domain.
View 1 Replies
View Related
Sep 27, 2010
I have 4 PC's all running WinXP/SP3 on a workgroup using simple sharing. All PC's had access to all other PC's shared folders and external backup drives. Norton Ghost worked successfully from each PC, writing to either of two external backup hd (one ea on two of the four PC's). Life was good. Then I moved two PC's and changed the Computer Name on each. Now I am able to access the My Documents shared folder from/to any computer, but I'm unable to access the external backup harddrives. I have admin privledges on all machines.
View 7 Replies
View Related
Aug 29, 2005
I have a computer that has been running XP pro for a long time. I would like
to join it to a domain, but have found out by experience that my "domain
user" and my "workgroup user" are two completely different people. Can I use
the file and settings transfer wizard to transfer my "workgroup user"
settings to my "domain user" settings and then delete my "workgroup user?"
Are there any security concerns (e.g. run as administrator) that I need to be
aware of
View 1 Replies
View Related
Oct 13, 2006
I ve got a simple network where i can see shared folder in the workgroup folder. Everythink works fine but i have created a new account for my friend and when accesing with that account i cannot access the shared folder any more and prompts for user name and password.
View 5 Replies
View Related
Aug 12, 2008
I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
View 2 Replies
View Related
Apr 11, 2006
Every time I switch on my machine and try to connect to the internet, I get a dialogue box: Web page is unavailable while offline. To view this page, click connect. When I click connect, I can view the page and don't get the error message again until I switch off the machine. Why does this happen?
View 6 Replies
View Related
Feb 11, 2009
When logging on, I keep getting this message.
C:/Program%20Files/MyWebSearch/bar/Message/COMMON/index.htmFiles/MyWebSearch/bar/Message/COMMON/index.htm
View 2 Replies
View Related
Feb 12, 2006
I get this message when I open the command prompt.A red box appears with the title 16 Bit MS-DOS Subsystem.The system file is not Suitable for running MS-DOS and Microsoft Windows application Choose Close to terminate the application.Whether I choose close or ignore the command prom closes and that is all i get can you.
View 5 Replies
View Related
Oct 5, 2006
i've been getting this message, not sure if my USB port is shot or what, here's the message,
View 8 Replies
View Related
Apr 2, 2008
This just started a few days ago. When my outlook Express loads it has four of each email message. Anyone have the answer on how to get it back to one message instead of four?
View 9 Replies
View Related
Mar 10, 2007
I somehow customized my startup to display a screen that reads, "This computer is set to explode in 12 seconds. Run away as fast as you can." The whole startup process stops until I click "accept."
I think it was some program that I was fooling around with and I thought it would be cute. But I've been sick of it for a long time now and don't know how to get rid of it.
View 8 Replies
View Related
May 24, 2007
i always get windows no disk pop up message every time i start my computer and it won't disappear. I'm running windows XP
View 2 Replies
View Related
Oct 6, 2005
I bought my computer from a shop, and was not given any XP Cd. When i Try to install SP2 i get message Can't Install SP2
View 14 Replies
View Related
May 10, 2007
when i on the system after some time i keep gettin this message at least once or twice a day why is this i am using winxp second edition my system is piv compaq presario. please refer the attacment which i am sending
View 1 Replies
View Related
Jul 29, 2007
I cannot get swdsvc.exe application error of my screen. I have tried everything. I am a computer beginner .
View 2 Replies
View Related
