After a failed ubuntu install on my dell 4700 i restarted my computer to read the message"no boot device availale press f1 to retry"and im unable to boot manually, my guess is that i accidentally formated it.trying to boot off the disc with windows xp install on it gets the same message, due to my somewhat broken drive.what do i do...and i cant install ubuntu either.
View 2 RepliesI haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies View RelatedA friend of mine just got updates from Microsoft and then had to reboot...upon rebooting her system, she was told there was NO BOOT DEVICE AVAILABLE.She has the Dell Vostro 200 series, running WinXP. I had her go into the bios and her HD is the first device in the BOOT ORDER. What else can I try to correct this issue and what would have caused the WIN UPDATE to prevent the computer from booting up?
View 6 Replies View RelatedI gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies View RelatedI am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
Insert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies View RelatedHow can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies View RelatedIs there anyway to see the BIOS boot order (1st CD, 2nd Floppy, 3rd HDD) through windows XP (possibly a registry key or something)? I ask because I need to make sure all of the computers in my department are set to HDD first and not CD incase they have a non-bootable CD in the drive and a power outage (or Windows Update) causes a reboot.don't want to goto every computer, and would like to do this all remotely.
View 2 Replies View RelatedMy pc was running fine when it just started beeping like a warning klaxon. Rebooting didn't help, but rebooting into safe mode then normal mode did. Then 1 hour later while running spysweeper, I stopped the scan early because it was taking too long. It detected 1 adware and 1 trojan, but the log said the trojan (ruin) could not be quarantined and some threat was still in memory, despite a problem free pc except for the beeping which I thot was resolved. After exiting spysweeper
my pc locked up and could not be turned off manually, so I unplugged the cord in back. Then I got a blue screen after it tried rebooting. The bootup started normally, but then a blue screen read as follows, more or less-If this is the first time you are seeing this message reboot your pc. Otherwise check for viruses, remove any new hard drives or hard drive controllers. or refer to your startup manual. I can't even boot in safe mode.
I am trying to set the boot device for a thinkpad T23. Nothing is password protected. When the BIOS setup CDROM is top, with no + next to it, and followed by hardrive and them removable. HD and removable does have a + next to it. CD is bootable, why won't the thinkpad boot from the CDROM?
View 2 Replies View RelatedDoes anyone know how to bring up the option to boot from HDD1, HDD2, Floppy etc during the post or slightly after post?I know how to do it on DELL machines. Shift+F12. Well some of them, I won't claim I've used all Dell Systems..I'm running WinXPHome on an Asus MOBO.I've done it before, quite by accident I assure you.But since then I cannot duplicate the feature.BTW: I am not talking about booting into safemode, or the command prompt. This is the start-up menu, correct?
View 14 Replies View RelatedI have a Windows XP PC dedicated to a machine that is constantly sending data via a serial port to the PC. When we power up the system the PC will sometimes think that the serial data coming in is a "new device" and installs it as a serial mouse. When the boot process is complete the PC runs a program from the Startup folder. When this program tries to open the serial port it is blocked by the "serial mouse" it thinks is there.
We have tried many things to prevent this problem. Disabling the mouse in Device Manager works for a while but eventually XP decides there is something wrong and does things like disable the COM port. We have tried disabling the Plug N Play services using MSCONFIG. This does not seem to prevent the detection of the "serial mouse" on boot up. We have a fixed set of hardware and software for this system that will never change. So I'd like to just disable all (or serial) device discovery on boot up. How is this done on XP?
I just changed cases for my computer and now when I start it you hear 1 beep (i have AMI BIOS) It then goes to what looks like a command and then the message Reboot or select appropriate boot device or insert boot media pops up. I have checked all my connections and tried it every which way. I have went inside and out of the BIOS and still no luck. I have also tried reinstalling Windows XP, but it says restart the computer and when I do it doesn't continue the installer. Instead it says reboot or select appropriate boot device or insert boot. I also get the error of Overclocking Error.I have a 2.79 Pentium 4 HyperThreading processor, ASUS P4S800D-X, ATI X800XL AGP, Tech-link 425w PSU, 3 sticks Kingston 512mb 333mhz PC3200 RAM, Samsung Spinpoint 120GB ATA hard drive, LG DVD-RW-DL burner, and a standard floppy.
View 1 Replies View RelatedYesterday and all day today every time that I boot my system I get a pop up saying: Attempting Boot from USB Device Non-system disk or disk error replace and press any key when ready. I can log on my system by pressing F9 and the options that I have are
CD-ROM
USB Device
Hard Drive
the Hard Drive is the only one that lets me log on my system, the other choices only take me back to the same pop up message.
I have read for the last 2 days and still can't find solution. 1) I don't have any computer knowledge 2) I have win 2000 pro do not know much else about system except it was built by a friend quit awile ago 3)stop error 0x000007b (0x8168e7do,0xc0000032,0x00000000,0x00000000) Inaccessible_Boot_Device. 4) No new hardware has been installed. 5)I was on the net my system frooze up I powered off then on and BANG Blue Screen
I recently purchased a 160 GB SimpleTech SimpleDrive (external-USB) for backup purposes. The enclosed software StorageSync (Pro) did a satisfactory job of backing up, although a little slow (1 hr - 40 min for 11.5 GB, no compression).
Neither the on-line manual or website gives information whether a restore is possible from a catastrophic-type incident of the O/S, requiring restoration from a bootup procedure. There's no instruction about preparing a "Recovery CD." I have Ghost 9.0; would this be more advisable to backup the image file; and would Ghost see the external HD from its Recovery CD?
After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.
My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.
Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
I was working on my computer, Windows 2000 Pro.I was moving my foot under the desk and accidentally switched off the surge protector.I turned the protector back on and restarted my computer.I get a royal blue screen that says Stop Error.Inaccessible Boot Device.None of the F8 options work for restart, they all say the same thing.I really don't want to have to reformat.
View 6 Replies View Relatedwhenever i connect my printer or my flash drive into the usb ports my computer freezes up and i have to power off manually and remove the device for the computer to start up correctly. any suggestions to help solve this problem?
View 3 Replies View RelatedI just installed a brand new cd-rw & dvd-rw into my computer. and windows did not see that there was new hardware installed, and it did not assign a letter to the drive, in fact it does not show up in my computer. It also does not show up in device manager. DOES ANYONE HAVE ANY IDEAS ON WHAT COULD BE THE PROBLEM HERE!!!!! I have triple checked the cables connecting them to the motherboard, and all is well, there are definately connected. the power cable is also connected, the links on the front of them blink when i restarted the computer
View 9 Replies View RelatedI am having an issue that i am hoping that someone can help me with, my computer has the correct name, however when i try to pair the computer with another device it does not retain the name it still holds the name that the computer had when i first got the computer a generic name. i am wondering what i need to do to get it to change the bluetooth name
View 2 Replies View RelatedWin XP SP2. DVD &CD drives missing from my computer and device manager. Showing in bios however. (yellow exclamation marks in device manager)I have tried numerous fixes for this problem but to no available.
View 4 Replies View RelatedI just transferred my old hard disks to my new computer and windows xp will not start. Windows 98 starts in the safe mode but when i try to start the normal mode iget an error stating "While initialiazing device NDIS: Windows protection error. you need to restart your computer"
View 1 Replies View RelatedI have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies View RelatedI am not aware of any change to my sys, except no sound at all. I've done all the help troublshooting suggestions, I have the same Yamaha device that came with the viao and am using the same built-in speakers.
View 6 Replies View Relatedi just got this audio capture device for xmas and i plugged it into the wall then i plugged the usb into my computer. my computer instantly froze then shut off. so i unplugged the device and turned my computer back on. it started booting up fine but then froze and shut itself off. now when i turn it on it sounds like it boots up normal but nothing comes up on the screen. also, when the computer is off, but plugged in, there is a red light on the cd drive and a red light on the keyboard. i think something shorted out but there is no sign of damage on the mobo or ram. im hoping its just the psu, but i really have no idea. here are the complete specs:
View 2 Replies View RelatedI tried to run a knoppix (live linux distro) cd and changed the boot order (F2 setup) to boot from cd. Ok... the cd still wouldnt boot, so I went into F2 again and made all devices non-bootable except the cd player. When I tried this method... I was informed that my cd drive isnt a bootable device. I checked a few settings but couldnt find anything in regards to this. Im just trying to boot from my cd player.
View 12 Replies View RelatedI have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies View RelatedI had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies View RelatedRunning Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
View 10 Replies View RelatedI've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies View Related