Choosing Boot From Device
May 27, 2006
Does anyone know how to bring up the option to boot from HDD1, HDD2, Floppy etc during the post or slightly after post?I know how to do it on DELL machines. Shift+F12. Well some of them, I won't claim I've used all Dell Systems..I'm running WinXPHome on an Asus MOBO.I've done it before, quite by accident I assure you.But since then I cannot duplicate the feature.BTW: I am not talking about booting into safemode, or the command prompt. This is the start-up menu, correct?
View 14 Replies
ADVERTISEMENT
Dec 17, 2007
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies
View Related
Dec 28, 2005
Athlon 64 Presario, Win/XP Which key do you hold down at startup to see the boot order? F8 doesn't do it on my machine. If there's a clone of my hd in the slave position I can choose it to boot up, can't I? Just want the option next time I mess up my OS.
View 3 Replies
View Related
Sep 8, 2008
i was having sum problems with ubuntu when i installed it onto my second hard drive(d).on my (c)drive i have xp pro installed and on the (d) drive i had nothing until i installed linux ubuntu so i decided to remove it and i messed up because before i uninstalled it i formatted that hard drive(d),and thought that should be ok coz it must have removed it,and i'm sure it did,but now every time i turn on my pc it gives me a choice of choosing a operating system either XP or UBUNTU,how do i get rid of the ubuntu on the startup i just want it to go into xp and not give me a choice,i have looked into it and every body says i should use the fixmbr in command in recover with the xp cd running and i did that but it still doesn't remove it
View 5 Replies
View Related
Sep 17, 2008
Can someone tell me what loads/runs when choosing normal mode that does not run choosing safe mode.
View 1 Replies
View Related
Dec 17, 2005
I gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies
View Related
Nov 11, 2006
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
View 1 Replies
View Related
Apr 22, 2010
How can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies
View Related
Jun 17, 2005
Is there anyway to see the BIOS boot order (1st CD, 2nd Floppy, 3rd HDD) through windows XP (possibly a registry key or something)? I ask because I need to make sure all of the computers in my department are set to HDD first and not CD incase they have a non-bootable CD in the drive and a power outage (or Windows Update) causes a reboot.don't want to goto every computer, and would like to do this all remotely.
View 2 Replies
View Related
May 15, 2006
My pc was running fine when it just started beeping like a warning klaxon. Rebooting didn't help, but rebooting into safe mode then normal mode did. Then 1 hour later while running spysweeper, I stopped the scan early because it was taking too long. It detected 1 adware and 1 trojan, but the log said the trojan (ruin) could not be quarantined and some threat was still in memory, despite a problem free pc except for the beeping which I thot was resolved. After exiting spysweeper
my pc locked up and could not be turned off manually, so I unplugged the cord in back. Then I got a blue screen after it tried rebooting. The bootup started normally, but then a blue screen read as follows, more or less-If this is the first time you are seeing this message reboot your pc. Otherwise check for viruses, remove any new hard drives or hard drive controllers. or refer to your startup manual. I can't even boot in safe mode.
View 1 Replies
View Related
Jul 6, 2005
I am trying to set the boot device for a thinkpad T23. Nothing is password protected. When the BIOS setup CDROM is top, with no + next to it, and followed by hardrive and them removable. HD and removable does have a + next to it. CD is bootable, why won't the thinkpad boot from the CDROM?
View 2 Replies
View Related
Aug 12, 2009
A friend of mine just got updates from Microsoft and then had to reboot...upon rebooting her system, she was told there was NO BOOT DEVICE AVAILABLE.She has the Dell Vostro 200 series, running WinXP. I had her go into the bios and her HD is the first device in the BOOT ORDER. What else can I try to correct this issue and what would have caused the WIN UPDATE to prevent the computer from booting up?
View 6 Replies
View Related
Jan 12, 2008
After a failed ubuntu install on my dell 4700 i restarted my computer to read the message"no boot device availale press f1 to retry"and im unable to boot manually, my guess is that i accidentally formated it.trying to boot off the disc with windows xp install on it gets the same message, due to my somewhat broken drive.what do i do...and i cant install ubuntu either.
View 2 Replies
View Related
May 7, 2010
I have a Windows XP PC dedicated to a machine that is constantly sending data via a serial port to the PC. When we power up the system the PC will sometimes think that the serial data coming in is a "new device" and installs it as a serial mouse. When the boot process is complete the PC runs a program from the Startup folder. When this program tries to open the serial port it is blocked by the "serial mouse" it thinks is there.
We have tried many things to prevent this problem. Disabling the mouse in Device Manager works for a while but eventually XP decides there is something wrong and does things like disable the COM port. We have tried disabling the Plug N Play services using MSCONFIG. This does not seem to prevent the detection of the "serial mouse" on boot up. We have a fixed set of hardware and software for this system that will never change. So I'd like to just disable all (or serial) device discovery on boot up. How is this done on XP?
View 1 Replies
View Related
Jan 11, 2007
I just changed cases for my computer and now when I start it you hear 1 beep (i have AMI BIOS) It then goes to what looks like a command and then the message Reboot or select appropriate boot device or insert boot media pops up. I have checked all my connections and tried it every which way. I have went inside and out of the BIOS and still no luck. I have also tried reinstalling Windows XP, but it says restart the computer and when I do it doesn't continue the installer. Instead it says reboot or select appropriate boot device or insert boot. I also get the error of Overclocking Error.I have a 2.79 Pentium 4 HyperThreading processor, ASUS P4S800D-X, ATI X800XL AGP, Tech-link 425w PSU, 3 sticks Kingston 512mb 333mhz PC3200 RAM, Samsung Spinpoint 120GB ATA hard drive, LG DVD-RW-DL burner, and a standard floppy.
View 1 Replies
View Related
Sep 8, 2009
Yesterday and all day today every time that I boot my system I get a pop up saying: Attempting Boot from USB Device Non-system disk or disk error replace and press any key when ready. I can log on my system by pressing F9 and the options that I have are
CD-ROM
USB Device
Hard Drive
the Hard Drive is the only one that lets me log on my system, the other choices only take me back to the same pop up message.
View 11 Replies
View Related
Oct 7, 2007
I have read for the last 2 days and still can't find solution. 1) I don't have any computer knowledge 2) I have win 2000 pro do not know much else about system except it was built by a friend quit awile ago 3)stop error 0x000007b (0x8168e7do,0xc0000032,0x00000000,0x00000000) Inaccessible_Boot_Device. 4) No new hardware has been installed. 5)I was on the net my system frooze up I powered off then on and BANG Blue Screen
View 2 Replies
View Related
Sep 1, 2005
I recently purchased a 160 GB SimpleTech SimpleDrive (external-USB) for backup purposes. The enclosed software StorageSync (Pro) did a satisfactory job of backing up, although a little slow (1 hr - 40 min for 11.5 GB, no compression).
Neither the on-line manual or website gives information whether a restore is possible from a catastrophic-type incident of the O/S, requiring restoration from a bootup procedure. There's no instruction about preparing a "Recovery CD." I have Ghost 9.0; would this be more advisable to backup the image file; and would Ghost see the external HD from its Recovery CD?
View 8 Replies
View Related
Jan 31, 2005
After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.
My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.
Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
View 11 Replies
View Related
Jul 12, 2005
I was working on my computer, Windows 2000 Pro.I was moving my foot under the desk and accidentally switched off the surge protector.I turned the protector back on and restarted my computer.I get a royal blue screen that says Stop Error.Inaccessible Boot Device.None of the F8 options work for restart, they all say the same thing.I really don't want to have to reformat.
View 6 Replies
View Related
Aug 27, 2009
PC specs are listed in profile. As you can tell, I have much less than the state of the art computer. I am looking to upgrade to a new MB for less than $100, $50 if possible (I can buy used from eBay, Amazon, whatever). Also I have no clue how to replace a MB, and if it is possible, I don't want to lose my data. I have a legit copy of XP Pro, but I don't have the disk, because I got the computer used. Eventually I want to dual boot with Linux, but I can figure that out later.
View 1 Replies
View Related
Apr 20, 2005
I am getting ready to buy my first laptop computer and don't have a clue as to what I should be looking for....my home computer is a Dell, and I am somewhat happy with it, but I have noticed that the Dell's laptops are quite expensive...more so than the other brands....I am looking for something not higher than $1,600...I have ruled out Gateway, as I have heard too many horror stories...especially with their customer service.
View 2 Replies
View Related
Jul 2, 2005
I just bought the Microsoft Windows XP Home Edition Upgrade With Service Pack 2, and I just got done setting everything up and I just defragged my (C drive. Either at the "welcome" screen or after choosing a profile, it says: "Loading your personalized settings" and this takes about a minute or two, which isn't that bad, but right after it loads that up, my desktop appears, and my icons don't show up until about 5-10 mins, which is very unusual. If I click Start, it hangs up.It doesn't freeze, 'cause I can still move the mouse
View 5 Replies
View Related
Mar 5, 2006
I had a crippling virus that forced me to re-install Windows XP. Whenever I boot my computer, I am given the choice between the older install of Windows and my new, stable install of Windows. Is there a way to bypass this so that my machine always boots with the stable version of Windows so that I am not always having to choose? Thanks for any replies.
View 3 Replies
View Related
Mar 7, 2008
Recently I have had to use the Recovery Disc to fix my Broken Boot.ini file. (with help from this forum, thank god)But now when I turn on my computer it requests that I choose out of Three Operating Systems.Is there any way that I can make it so that it by default chooses the correct operating system so I can skip that screen.I have a little brother and sister that use the computer, so when they see that screen they panic.
View 1 Replies
View Related
May 23, 2010
So just recently whenever i try downloading anything, when i click run it asks me to choose a program and i dont know what to do. For instance i tried to download the Photoshop free trial but once it tells me to choose a program i don't know what to do.
View 10 Replies
View Related
May 27, 2008
My Systemax PC with Windows XP Home SP2 pre-installed is suffering [can't copy/paste, can't use Windows Update, "Network Service" svchost.exe using 50% CPU...], and I thought I'd try a repair as mentioned in this stickied thread, but I'm not sure if which Windows CD I buy off of eBay will make a difference. All the instructions say is that it requires "A Windows XP Home CD".Is there a significant difference if I used a CD that had no service packs installed on it to repair an SP2 system? Or a Pro CD, since I have Home edition installed? Or a "XP HOME OEM WITH SP2 NEW & SEALED!" disc, as one seller puts it -- What's the difference that the OEM qualifier makes, and is it relevant to a repair operation?
View 3 Replies
View Related
Nov 28, 2008
I did something while moving some pictures to the "windows web wallpaper folder "Yesterday I went to change the desktop picture and was met with a choice of hundreds of pics.I have checked the registry and it points to "windows web wallpaper folder ", I can not figure out why so many files are now showing up when I want to change the wallpaper.Most are from various places in "My Pictures " But some are elsewhere.Its crazy there must be two hundred of them showing up as wallpaper choices ..I need to know if anyone can help me figure out how to sort this out.
View 5 Replies
View Related
Oct 9, 2010
I am leslie, i have a win xp 32 bit, intel pentium 2 and a nvidia 8400gs. is there a display driver out there for the most stability and performance and dont ask me to download the newest drivers caused the new drivers caused even more problems and my old driver, even though my old drivers are stable but has VERY low frame rates for dota.
View 3 Replies
View Related
Jan 28, 2005
Can someone tell me what size computer i need to install xp, Im mucking with a computer my son was given, its a 3 gig and has 32 meg of ram, I know that it wont fit on there, but wondering if it was worth upgrading it
View 7 Replies
View Related
May 11, 2006
I'm running Windows XP Pro and when booting up i get the option of choosing two operating systems for some reason? Is there a way to get rid of one of them (i know only one works) or to change the 30 secs it gives you to choose which OS to use?
View 2 Replies
View Related
