I've got a e-series laptop running windows Xp Home 512 Ram. Lexmark inkjet 640. I can no longer print anything from the command of>{Toolbar} File>Print>OK or even by the printer Icon graphic on the browser toolbar but when I print Via Ctrl-P shortcut, it sometimes works.
View 3 RepliesI have a Windows XP Pro SP2 PC on a P2P LAN. The PC is also running Norton Antivirus 2005.Also on this LAN are several networked printers,one of them being a new HP OfficeJet 7310xi All-In-One printer. This printer is connected directly to the LAN and provides networked printing and scanning to the PCs on the LAN. I have two Windows 2000 Pro PCs and a Mac OS X printing and scanning to that OfficeJet without any problems From the XP box, I can print to the OfficeJet as long as I'm logged as the local administrator. When the user logs in with her user account, she is unable to print. Her jobs get stuck in the queue, labeled "Error - Printing."
View 6 Replies View RelatedI write a file in Word and then save it.Before I print it I usually go into Print Preview just to check things out.This time however it just showed me a blank box and the printer would not print.Everything was OK for a complete day and then the problem happened again - blank preview and no printing. This time switching off for 10 minutes and then back on had no effect.I have been trying most of today to correct things without success. I then copied it onto a floppy, put the floppy in my friends PC - same result as before
View 4 Replies View RelatedI previously owned a Lexmark Z25 printer and up to a certain point, it was printing ok. Then it abruptly stopped printing any pages. It sounded as if it was getting the signal from the computer, but nothing would print. Rather than buy new cartridges, which would have cost more than a new printer, I bought a Dell 720. Now, the color prints fine, but I cannot get the black to print. The cartridges are just about full with only a small amount out of the black cartridge.
View 7 Replies View RelatedFinding the procedure to Print envelopes , dont know how to do this
View 1 Replies View RelatedI have a printer/copier/fax/scanner which was working perfectly. It is a Lexmark X1270. My Computer is a HP Multimedia with a windows XP operating system. Suddenly one day it stopped working. the following error message appeared error message: the procedure entry point? GetProductPrefix@LXkProduct@@SA?AVCString@@XZ could not be located in dynamic link library lxczutil.dll. when trying to use the copy function. For the printer function it would sometimes print ONE item. Then to print anything else I have to restart the computer and again it would print only one copy. Unfortunately the original cd with the drivers has been lost so I emailed the lexmark. They asked me to download the driver for X2500. I tried but it did not work as the model number seems different. I sent them 3 reminders for further help which they did not reply! And now again suddenly a few days ago the printer does not even load. Message says 'Spooler service is not running'. And even the other printers are unusable because the fax printer box is empty and I cannot reload a printer ..the same 'Spooler....appears.
View 4 Replies View RelatedI installed a new modem the other day cause the old one got fried. Now I am trying to print and the printer keeps giving me an error message, "this document fail to print." I tried all possible troubleshooting techniques but nothing help. I don't know what to do.
View 1 Replies View Relatedi have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.
View 2 Replies View RelatedI have a Lexmark 5150 all-in-one printer. I can't seem to save my settings.I go to quick print under Preferences and click Save Settings, and then enter that setting.It prints at that setting.But after the printing job is done and I have closed the program,I find that the next time I open the program and go to preferences,the Quality/Print setting has reverted to normal.I'd like it to stay at quick print until I change it.
View 6 Replies View RelatedI have an interesting situation. On a 100 node network I have multiple printers with static IP?s. 1 certain printer, Marketdell, on port 172.16.2.156 is not able to be printed to from only 1 user. I have deleted the printer from the PC, shut down, turned on, Added printer opened notepad and tried to print, Can?t print.
I opened up printer and faxes, double clicked on the printer and could see the empty print queue. I then opened up Marketdell Printer Properties, clicked on print test page. Received error: Test page filed to print, would you like to view the print troubleshooter for assistance.
Printer wont print THE printer normally prints fine but now it wont print atall the usb cable is in and the printer wont take the paper it just sits there
CONTROL PANEL> PRINTERS> OPEN and it says its printing just fine but it isnt Its in the front usb hub and tried the rear it dont make any differnence. The printer is on and its got paper etc etc.
I am running internet explorer in windows xp---When I right click on a web site in my favorites and choose desk top short cut, I then go to the desk top and click on the icon for that site and it opens a window to the printer as if to print it instead of going to that web site. I have run all the adware, spyware, and viruse programs I have, but to no avail.
View 2 Replies View Relateda friend has 3 computers 1 desktop, 2 laptop, Linksys wireless router windows Xp. HP Photosmart 400 will only print from destop Computer. Is there a way to get the printer to print from all 3?
View 4 Replies View RelatedI currently installed Windows Live Onecare on my computers for security. On my laptop, when the "firewall" is "ON" my laptop will not print to my desktop printer. When it is turned "OFF" , it DOES print. Why's this??
View 4 Replies View RelatedI just starting using another computer and found out that it does not have a parallel port for my printer. So I purchased a usb - parallel cable. Hooked it up to my HP 722 printer, set it up, made it the default printer. When I go to print, a page comes out blank. I tried Word, Notepad, Wordpad, and still nothing. It does however print from the internet with no problem.
View 7 Replies View RelatedIf I want to print a document in Landscape format that I have typed in Word, I click on Print/Properties/Basics/Landscape/OK, and it still prints out as vertical or Portrait. How can I get it to print in horizontal or Landscape format?
View 1 Replies View RelatedIm running XP Professional, SP 2, on an Intel P3 1Ghz, 512 MB of RAM.I deleted my old Lexmark printer after I installed a new HP. Now my printer wont work. I tried restarting the print spooler and nothing. I checked the dependencies and both boxes are 'GREY' (closed) and show no dependencies listed.Im thinking I deleted some files or file required to operate the spooler/printer? Or is it possobly spyware or something causing this problem? I did perform a registry cleanup after the installation of the new HP printer.
View 5 Replies View Relatedwe cant change the display depth below 16bit. we can only see windows in safe mode it just shows a garbled screen in normal mode
View 2 Replies View RelatedMy printer puts out blank paper whenever I request a print from Microsoft Word, Wordpad, or note pad. I cannot do a command prompt. Everything is fine with internet outlook express. Printer does a self check very well.
View 9 Replies View RelatedMy printer has just started not to print all the full colours. It is an all in one HP PSC 1410 and now prints everything as either Yellow, Light green or light blue. I have changed both the colour and black cartridges and the computer is seeing them as full, but if I scan or print from computer it prints say the colour purple as light yellow and red as bright Yellow etc. I have tried removing and reinstalling software but that didn't cure the problem.
View 3 Replies View RelatedI used to be able to select text and check the box that says selection and only what i selected would print. That box is now grayed out ALL the time. How can this be fixed?
my primary printer is a Brother MFC-8670DN wired to ethernet.Operating system is XP home SP3.
I'm printing to a network printer. Everytime a print up a multi page documents it prints it back to back ( 2 sided) How can I take this function off?
View 4 Replies View RelatedI have a dell laptop wwith xp 2000 Although the document gets to the printer, it doesn't print and doesn't gave error message
View 2 Replies View RelatedDoes anyone know what the problem could be with my printers not printing out envelopes? They will print out a letter but not envelopes though they act like they are printing but nothing prints when they come out in the tray? And, yes I have ink! LOL! Just curious as to what could be the problem.
View 14 Replies View Relatedmy hp psc 1100 series printer will not print, the scanner works,the copier works, but the printer will not print anything not even a test page,i keep getting this message, {SYSTEM ERROR DOCUMENT FAILED TO PRINT DUE TO A SYSTEM ERROR}, I am using Windows XP SP2 Media Centre Edition, the strange thing is the printer works perfectky on my other computer which is Windows ME edition
View 3 Replies View RelatedThe printer is HP C5280 and I use Outlook. When I click on print it says I have a runtime error. It then says to Debug and says line 2020 unspecified error. At debug it now says it has an unknown exception. At this point I dont know what to do, my PC knowledge is minute.
View 1 Replies View Relatedi have a hp psc 1500 series printer /when i try to scan i get a error..an error occurred during preview .if scanner is being used please wait for it to complet the task abd then click preview.microsoft windows.xp media center edition version 2002 service pack 2
View 3 Replies View RelatedI have installed a printer in a remote location on four machines. They all run Windows XP (SP2 I think). It works perfectly on three of the machines, but will not work on the fourth for some reason. It installs on a TCP/IP port just fine, and we can view properties and everything, but it will not print at all. I have no physical access to these computers, so cannot provide very much more information about them, but I'll try my best.
View 2 Replies View Relatedi got a printer from a family member a couple of days ago, and he couldnt find the software, soo i went on HP and downloaded the driver. when i try to printer something the printer pulls the paper in a little ways the it pushes it back and does that about 2-3 times? have no idea what is causing this.
View 14 Replies View Relatedhere's my first problem I can't fix, Heres what I've tried so far:I've reinstalling my Printer, and it still doesnt print I've tried going into Internet Options and sorting out the sites and that..When I try to print from the internet, or even different programs, I get that "Send Error report" thing, and after that it closes. I'm so frustrated!!!! can anyone help?
View 7 Replies View RelatedI have a dell 2400 series PC running XP home edition. My Dell A920 printer stopped working. When I uninstalled and tried to reinstall it, I couldn't get it to reinstall properly. I used the original CD and I also downloaded a driver from dell.com. Neither worked. I tried to install a new Samsung ML-2010 printer. I used the included CD. It finished the install and when I tried to print the test page, it wouldn't print. It appears in the print queue as "printing" but never prints. When I reboot, I see a message on the system tray saying new hardware detected, there was trouble on the install and new device may not work correctly. I tried to do a repair from the enclosed Samsung CD but it didn't fix the problem. When it tried to print the test page, it said "not responding" in the blue bar across the top of the page
View 9 Replies View Related