User Unable To Print To OfficeJet Printer But Fine With Administrator ?
Feb 15, 2005
I have a Windows XP Pro SP2 PC on a P2P LAN. The PC is also running Norton Antivirus 2005.Also on this LAN are several networked printers,one of them being a new HP OfficeJet 7310xi All-In-One printer. This printer is connected directly to the LAN and provides networked printing and scanning to the PCs on the LAN. I have two Windows 2000 Pro PCs and a Mac OS X printing and scanning to that OfficeJet without any problems From the XP box, I can print to the OfficeJet as long as I'm logged as the local administrator. When the user logs in with her user account, she is unable to print. Her jobs get stuck in the queue, labeled "Error - Printing."
I've got a e-series laptop running windows Xp Home 512 Ram. Lexmark inkjet 640. I can no longer print anything from the command of>{Toolbar} File>Print>OK or even by the printer Icon graphic on the browser toolbar but when I print Via Ctrl-P shortcut, it sometimes works.
If I want to print a document in Landscape format that I have typed in Word, I click on Print/Properties/Basics/Landscape/OK, and it still prints out as vertical or Portrait. How can I get it to print in horizontal or Landscape format?
I used to be able to select text and check the box that says selection and only what i selected would print. That box is now grayed out ALL the time. How can this be fixed? my primary printer is a Brother MFC-8670DN wired to ethernet.Operating system is XP home SP3.
here's my first problem I can't fix, Heres what I've tried so far:I've reinstalling my Printer, and it still doesnt print I've tried going into Internet Options and sorting out the sites and that..When I try to print from the internet, or even different programs, I get that "Send Error report" thing, and after that it closes. I'm so frustrated!!!! can anyone help?
I write a file in Word and then save it.Before I print it I usually go into Print Preview just to check things out.This time however it just showed me a blank box and the printer would not print.Everything was OK for a complete day and then the problem happened again - blank preview and no printing. This time switching off for 10 minutes and then back on had no effect.I have been trying most of today to correct things without success. I then copied it onto a floppy, put the floppy in my friends PC - same result as before
I previously owned a Lexmark Z25 printer and up to a certain point, it was printing ok. Then it abruptly stopped printing any pages. It sounded as if it was getting the signal from the computer, but nothing would print. Rather than buy new cartridges, which would have cost more than a new printer, I bought a Dell 720. Now, the color prints fine, but I cannot get the black to print. The cartridges are just about full with only a small amount out of the black cartridge.
We have our own printer driver which basically prints any document to our application (just like Adobe). Our installer creates a named printer port in HKEY_LOACL_MACHINESOFTWAREMicrosoftWindows NTPorts (eg. OurPort). We stop the spooler service and then start it too to refresh the list of ports. Then we create the printer by running this command from within installer. rundll32 printui.dll,PrintUIEntry /if /b "Our Printer Name" /f "Path of the inf file" /r "OurPort" /m "Printer driver name" /Z Once all this is done, we try printing any document to this printer we created and it does print in our application. But this happens only when the logged on user is either admin or a power user. When we try to login with a local user, and he tries to print a document to our application via our printer, it fails. We can see the document in the printing queue but it shows error-printing.
I need help recovering my user files. My computer was acting very slow. I tried different restore times but was unable to solve the problem. it all started when I installed Nero. When I tried to access my music folder. I then got an error message stating that the folder was not responding. I then had the bright idea to do a PC recovery. bad idea. it deleted all of my user files except for shared files.
I installed a new modem the other day cause the old one got fried. Now I am trying to print and the printer keeps giving me an error message, "this document fail to print." I tried all possible troubleshooting techniques but nothing help. I don't know what to do.
Walk me through printing an envelope on my Lexmark X125. I have clicked on envelopes, then options for the envelope size, then print. The envelope comes out blank.
I have an interesting situation. On a 100 node network I have multiple printers with static IP?s. 1 certain printer, Marketdell, on port 172.16.2.156 is not able to be printed to from only 1 user. I have deleted the printer from the PC, shut down, turned on, Added printer opened notepad and tried to print, Can?t print. I opened up printer and faxes, double clicked on the printer and could see the empty print queue. I then opened up Marketdell Printer Properties, clicked on print test page. Received error: Test page filed to print, would you like to view the print troubleshooter for assistance.
Printer wont print THE printer normally prints fine but now it wont print atall the usb cable is in and the printer wont take the paper it just sits there CONTROL PANEL> PRINTERS> OPEN and it says its printing just fine but it isnt Its in the front usb hub and tried the rear it dont make any differnence. The printer is on and its got paper etc etc.
a friend has 3 computers 1 desktop, 2 laptop, Linksys wireless router windows Xp. HP Photosmart 400 will only print from destop Computer. Is there a way to get the printer to print from all 3?
I currently installed Windows Live Onecare on my computers for security. On my laptop, when the "firewall" is "ON" my laptop will not print to my desktop printer. When it is turned "OFF" , it DOES print. Why's this??
I just starting using another computer and found out that it does not have a parallel port for my printer. So I purchased a usb - parallel cable. Hooked it up to my HP 722 printer, set it up, made it the default printer. When I go to print, a page comes out blank. I tried Word, Notepad, Wordpad, and still nothing. It does however print from the internet with no problem.
Im running XP Professional, SP 2, on an Intel P3 1Ghz, 512 MB of RAM.I deleted my old Lexmark printer after I installed a new HP. Now my printer wont work. I tried restarting the print spooler and nothing. I checked the dependencies and both boxes are 'GREY' (closed) and show no dependencies listed.Im thinking I deleted some files or file required to operate the spooler/printer? Or is it possobly spyware or something causing this problem? I did perform a registry cleanup after the installation of the new HP printer.
As the Administrator on my home PC, I can print everything and anything, but none of my Limited account Users can print. They can see the printer and it shows that they are connecting to it, but nothing will print as long as they are logged in as a Limited User.
My printer puts out blank paper whenever I request a print from Microsoft Word, Wordpad, or note pad. I cannot do a command prompt. Everything is fine with internet outlook express. Printer does a self check very well.
My printer has just started not to print all the full colours. It is an all in one HP PSC 1410 and now prints everything as either Yellow, Light green or light blue. I have changed both the colour and black cartridges and the computer is seeing them as full, but if I scan or print from computer it prints say the colour purple as light yellow and red as bright Yellow etc. I have tried removing and reinstalling software but that didn't cure the problem.
Does anyone know what the problem could be with my printers not printing out envelopes? They will print out a letter but not envelopes though they act like they are printing but nothing prints when they come out in the tray? And, yes I have ink! LOL! Just curious as to what could be the problem.
my hp psc 1100 series printer will not print, the scanner works,the copier works, but the printer will not print anything not even a test page,i keep getting this message, {SYSTEM ERROR DOCUMENT FAILED TO PRINT DUE TO A SYSTEM ERROR}, I am using Windows XP SP2 Media Centre Edition, the strange thing is the printer works perfectky on my other computer which is Windows ME edition
The printer is HP C5280 and I use Outlook. When I click on print it says I have a runtime error. It then says to Debug and says line 2020 unspecified error. At debug it now says it has an unknown exception. At this point I dont know what to do, my PC knowledge is minute.
i have a hp psc 1500 series printer /when i try to scan i get a error..an error occurred during preview .if scanner is being used please wait for it to complet the task abd then click preview.microsoft windows.xp media center edition version 2002 service pack 2
I have installed a printer in a remote location on four machines. They all run Windows XP (SP2 I think). It works perfectly on three of the machines, but will not work on the fourth for some reason. It installs on a TCP/IP port just fine, and we can view properties and everything, but it will not print at all. I have no physical access to these computers, so cannot provide very much more information about them, but I'll try my best.
i got a printer from a family member a couple of days ago, and he couldnt find the software, soo i went on HP and downloaded the driver. when i try to printer something the printer pulls the paper in a little ways the it pushes it back and does that about 2-3 times? have no idea what is causing this.
Operating system: XP home.When creating a user account for my husband with limited access, I lost my user account as administrator. My guest account has also disappeared. I cannot download or do anything because of the limited access that my husband has. How do I get back/show my user account with administrator access?
I've recently setup a limited user account on a XPSP2 Home machine. The intent is to use it for internet and email. When I switch to this account, and try to setup, say, my email client, the configuration or settings do not stick. On a couple other apps too, when I click on them to start them, it's as if it's the first time they are being executed. I enter the info, apply or save, and when I shut the app and come back into it, the same thing happens. For instance; in the email client, each time I go in, the setup wizard starts and asks for my pop3 and smtp etc..I enter it, save, shut the app, come back in and the wizard starts again, asking for the same things.
In recently restoring my crashed machine, I noticed that when the machine was idle, it would go back to the user login screen. I found this tedious as I just wanted it to go to screen saver but stay within the user session. I ran 'control userpasswords2' and de-clicked 'Users must enter a user name and password to use this computer.' (It's a home computer so not worried). Now when I reboot, it brings up a Windows login for Administrator and says, "Unable to log you on because of an account restriction." I can bypass that and log in as Owner or anybody else so it's more cosmetic than anything else.Question - who is this "Administrator?" The account doesn't show up under User Accounts. 'Owner' is the Administrator. Do I care about this account (which appears to be hidden? Should I allow it to log in under the covers? If so, do I have to re-click 'Users must enter a user name and password, etc."
