I was going to do a clean install of 2000 over 2000,it won't let me do the install.
I thought I'd clean it up, so that is working out great, the seller didn't leave too much on there...but everytime it restarts I have the option to run windows 2000 or run windows 2000 setup.how to make it start up normally?
After a reinstall i now get the option of "xp pro or xp pro" bit daft really anyone got a clue
also having two harddrives i choose this time to put windows on the smaller one 37gb
i cannot get windows to call it "c drive"
every time i boot up or restart my comp i get a screen saying this:
Please select the Operating System to start:
Microsoft Xp Home Edition
Restore Microsoft Home Edition
for troubleshooting and advanced startup options for windows, press F8.
Ive tried selecting both options and it boots up normally into Xp, but then when i boot up again or restart the comp the same screen appears every time
P4 2.8
512mb ram
100gb hard drive
Windows Xp Home sp2
How would I go about restoring windows when all five startup options go to bsod? I get different stop messages when I choose different options. I thought about an OS re-install but can't find my disk, all I can find is the disk for my fiancee's Laptop. Hers was XP pro and mine was Xp home so I didn't think it would work, and besides I can't find any product codes or serial numbers for either. Am I going to have to format and buy a new OS or what?
View 10 Replies View RelatedIsn't F8 supposed to bring up the boot options for win XP? It's not
working. I've tried F1, F4, Esc, and Delete,
F8 function is not working and that I'll need to fix
this somehow.
When i restart my compter or turn it on. i get prompted for windows xp professional twice and a windows xp setup. only ones valid and works.
View 1 Replies View RelatedCan anyone please tell me how to disable the Windows start-up options at the start of windows XP?
View 4 Replies View RelatedI have inherited an old compaq s6220wm without HDD from a friend. Whenever I attempt to boot windows XP from a tested and working HDD, I am given the screen with the option for safemode, regularboot, etc. After selecting a boot option, the PC will start the boot process, and then a few seconds reboot, without any error message. Insterestingly, I can boot just fine with the LiveCD into Linux.
View 5 Replies View RelatedI bought a computer with XP Pro loaded. Recently discovered that the XP Pro is not "legal" so I went and bought XP Home (all I needed anyway). Loaded XP
Home but now when the computer starts up I get the choice to either run XP Home in safe mode or XP Pro as before. Bascially I want to run with XP Home and discard XP Pro so that I am legal and can register for updates etc. Err, what should I do?
ok my neighbors Dell was having problems loading windows so i took alook at it it would still lock up in safe mode before the windows login screen so i tried to use the windows disk to repair windows but they forgot the passord that they used and it wouldnt let me repair with out a admin password so i decided to format so i used the windows xp home edition disk to format all the partions and reinstalled windows now its seeing 2 copys of windows when u boot up and giving the option to pick wich windows xp home edition i want to boot with.
View 4 Replies View RelatedI messed up some of my .dll files so I needed to re-install Windows XP. While the installation process was on I was prompted for an Administrator ID and Password. I never had an Admin id before, there I created one. After the reinstallation I restarted my system and I was shown an OS choice menu where there were two entries named 'Microsoft Windows XP'. The first choice opened up the newly created guest account and when I logged in it had none of my previous data, it was just like a frest account. The second choice was my normal account that I was using before re-installtion. Now I was annoyed with the admin account and reinstalled Windows for the second time. After re-installing I saw there were a total of three OS menu choices, the first two were admin and the last one is my own account. So everytime I start my PC I have to manually select the third OS option. Its really annoying. How do I get rid of the first two OS choices?
View 7 Replies View RelatedI have apparently inadvertantly changed a setting.
View 6 Replies View Relatedwhen computer turn it on it boots directly into
"Windows Advanced Options Menu"
all option are available for me to access, although the keyboard is non responsive (yes it works) & i am unable to select anything
after the timed countdown it starts to boot and get to the windows welcome screen and then hangs. no further progression from that point.
specs as i know are
win xp 2
512 ram
motherboard (asus i think)
rest is all on board
I HAVE A LAPTOP HP PAVILION DUAL CORE 2GB RAM,120GB HD (W VISTA)I WANT TO CREATE A PARTITION IN THE SAME HD THE HAVE VISTA INSTALL TO INSTAL XP SO I CAN DUAL BOOT TO XP BUT I DON'T WHAT TO FORMAT MY HD AND VISTA DOO'T LET ME INSTALL XP AND I DOWNLOAD PARTITION MAGIC AND IT DOESN'T RUN ON VISTA.....AND WEND I BOOT MY THE LAPTOP USING XP CD MY HD DO NOT APPEARS SO XP CANT BE INSTALL PLEASE LET ME KNOW OF ANY SOLUTION
View 2 Replies View RelatedOk, I finally decided I need to fdisk, format and reinstall windows xp. Repairing and re-installing are not options. Too many errors result.Here's the problem. I have several startup disks... from 95 through xp (which is actually ME in isquise). NONE of the fdisk commands seem to work. XP is so screwed up, I'm lucky to get back here, let alone find my original post. All I want to do is fdisk my C drive. My D drive is 120gig, and formatted just fine. I don't want to use it as my master though. I just want to put all my other stuff on it.
View 14 Replies View RelatedWhen I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
View 11 Replies View RelatedI have a computer that I formatted the hard drive on. Then installed Windows XP Pro. When it boots up, it goes to a black screen and has Windows XP Pro and Windows XP listed with the Win XP Pro selected and boots to it in 15 seconds or so if nothing is selected. I have read somewhere about this before and have NO clue where I read it, but does anyone know how to get rid of the option (Win XP) that really doesn't even exist on the hard drive?
View 4 Replies View RelatedI have ended up with 4 different options for XP Pro when my computer starts. This is, basically, as a result of me re-installing Widows a couple of times to try and solve a very slow running system (more help needed there but I will start a new thread for that).How do I remove the 3 unwanted start options?
View 5 Replies View RelatedI recently reformatted and repartitioned hard drive and reinstalled XP. I messed something up because now when I boot comp, I'm given three different Windows XP options to boot even though I have only one instance of XP installed. What do I have to do to get rid of the two unwanted boot options?
View 4 Replies View RelatedI want a program to run at startup and I want to be able to change what I have done at any time.
There are a number of unchecked entries in msconfig and I have to use Selective Startup all the time.
If I want to revert to Normal Startup under the General tab instead of Selective Startup, the program's box automatically rechecks itself in Startup.
The Startup tab gives me a handy record of what I did and allows for an easy change of mind so long as I continue to use Selective Startup.
If I edit the Registry to stop programs running at startup, they won't show in msconfig and I lose the handy record of how it was and I may have to reinstall the program to go back to it running at startup.
I would like to accomplish this:
1. Use Normal Startup instead of Selective Startup.
2. Have some programs not run at startup, but be able to easily change back to having them run at startup.
3. Have a readily accessible list of those programs and the details as shown under the Startup tab as a reminder of how it was without having to manually enter it all into a text file or keep a notebook or reinstall.
Is there some way to use Normal Startup, stop programs running at startup, but retain or find a list of those programs (including the details under the headings Startup Item, Command, Location) that is shown when using Selective Startup with unchecked boxes under the Startup tab?
To put it another way, use Normal Startup but somehow retain the convenient flexibility of Selective Startup.
My startup time went up drastically.
I have disabled all but two of the automatic startup items using msconfig. My system used to start in less than two minutes, easily. Now it takes a more than a minute or two longer than that.
I know what the problem is; the only three items that show in the system tray after startup are:
1) The AVG Antivirus icon .
2) The Spybot SD Resident icon.
3) Local Area Connection (This is the icon which shows two computer monitors with screens that light up and go dark periodically)
Now, after the problem started, the last item, the Local Area Connection icon is the one that doesn't load, for VERY long. So it may be something to do with that. Also, just before the icon finally shows up(after which point the computer is fine to use) I've notice that a Windows security notification icon appears...it flashes, for just a second, and then is replaced by the Local Area Connection icon. For the record, these are the two icons I'm talking about:
http://i131.photobucket.com/albums/p282/sw1sh1/LAC.jpg
http://i131.photobucket.com/albums/p...tification.jpg
I have had my automatic updates disabled for a while now, so you might think that that's the reason the notification is showing up but I've already disabled that notification using Windows Security Center.
Try making my laptop less slow and not freeze all the time when doing the simplest of tasks.
However, my problem happens after trying to disable the Startup Items from the MSconfig dialogue.
-After I have unchecked the boxes I don't want, I click OK or Apply;
-It then tells me I have to restart for the changes to take place, so I do this;
-Then after completing its restart a message says that "The System Configuration Utility is in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts up."
-it then opens the MSconfig dialogue box again.
If I just close the utility or click ok, sure enough it keeps on opening every time I startup. Or else, what it's trying to convince me to do is to start up in Normal Mode. But I won't do this because then all the Startup Items I'd disabled become enabled again and the whole lengthy task was a waist of time!
The run link is missing from my startup menu...can anyone help me find it? I know this sounds dumb, but I really need to restore it to my startup so I
can take care of some other problems I'm having.
How do you remove the "Common Startup" items from the startup list in msconfig for Windows XP? I did locate and remove the "Run" items that are located in HKLMSoftwareMicrosoftWindowsCurrent VersionRun.
View 6 Replies View RelatedWin XP Home edition. I'm in the Speed Up Windows Startup class. I currently have a very long list of startup programs running. Is it safe for me to disable all except security programs (Symantec Norton,AdAware,Spyguard)?Charles
View 6 Replies View RelatedI think I might need to do this.It's now impossible to click or d/click on a programme or even an email and have it open I have to click 6-10 times before the little hourglass appears.I think I need to change my startup : what do you think? Msconfig shows my startup options to be -Normal Diagnostic Selective
Ought to to choose diag?Or Selective?because I can't decide which programmes I ought to remove and which to leave in, but I'm sure I have too many.
My sister's computer is running very slowly, particularly at startup (which seems to take forever). I've got Panda antivirus software running and do reasonably regular spyware scans with AdAware, but am not sure if the problem is just that the computer is old with too little memory / overheating because it's on almost all the time / something else I haven't thought of. To help me determine what's going on, could someone much smarter than myself take a look at this HJT log and see if you see anything of concern?
View 14 Replies View RelatedThe problem is it takes an incredibly long time to startup because of these, once we close them it gets back to running fast, but until then we have to wait for them to open. I think it's causing the problem because we didn't have this problem until we installed this.How do I make it stop starting up on Windows XP? I sped up my startup on my computer by stopping useless things from running.
View 4 Replies View Relatedwhat exactly should be checked in the 'tools/options/advanced box.
View 3 Replies View RelatedI cant open internet options in control panel or any where can someone help its a xp
View 1 Replies View RelatedRecently, I had to use the command "bootcfg /rebuild", which fixed a booting problem I was experiencing. However, now it asks what OS I'd like to boot from every time. The problem: It shows "Microsoft XP Home Edition" Twice. Is there any way to fix this and to just allow XP to boot automatically every time without prompt?
View 2 Replies View Related
