I have aquired an older laptop that has XP Home on it that has not had the windows Service Packs installed. I tried to load SP3 from a CD, but found that I needed SP1 or SP1a loaded first. Where can I safely get this outdated software ?
View 6 RepliesHe how can i upgrade Windows service pack 1a to Windows service pack 2. And how do i do it. I tried microsoft update and it didn't work. i don't have windows service pack 2.
View 12 Replies View RelatedThis came with my Dimension 2400 desktop 3 years ago which of course I updated to SP2.I was wondering if it could be used as the operating system for another laptop without one (maybe Dell or Toshiba) for my second computer and still be recognized for all the Microsoft updates. Someday my Fujitsu 655 TX hard drive will use up all of its rotations
View 10 Replies View RelatedMy younger sister was playing on the "Neopets" website. She loaded up a browser-based game called "Shenkuu River Rush". As I understand, to do this, she needed to download the "3D Life Player". The game worked fine for a while, but then started to run slow, so she restarted the computer. When she restarted, it still ran slow. She was also running the latest version of MSN/Windows Live Messenger. Finally, she loaded up the game and the computer pretty much froze (impossible to do anything, and showed no signs of resolving) so I came and shut it down manually.When I switched it on again, the computer went into the usual "We apologize for the incovenience, but Windows did not start successfully." screen. Thinking nothing of it, I selected "Start Windows Normally" and hit enter. The screen stayed on the Windows XP loading screen for a while, then flickered to a BSOD (I couldn't out what it was at this point) and restarted. This time, I selected "Last Known Good Configuration", and the exact same thing happened. I then tried running it in Safe Mode (both regular and command line)
The computer came with Windows XP loaded on it (I think it might've been Home Edition?), but I had a Windows XP Professional disk so I booted up from that. The "Windows Setup" screen comes up, and at the bottom of the screen, as is routine, the "Setup is loading files..." message is present. Just when all the files are seemingly loaded, and the message at the bottom of the screen flickers to "Setup is loading Windows.
When I start windows XP, I get the message (error loading DOCEOC 1681 )The specified module could not be loaded.
View 7 Replies View RelatedWhen I run AOL 7.0, it always says not responding after it has loaded. I tried uninstalling and installed it a gain and it still doesn't work.
View 14 Replies View RelatedI'm trying to fix my friend Emachine that he got about a year ago, it has a 80 gig hard drive, 512 ram. When I took a look at it I tried to boot it up and it started to load windows xp and then just stopped and started over again and kept reapting this process untill I shut down the computer. I continued to us fdisk and format at the dos promt to format the disk and then tried to load windows xp over again. It got almost all the way done then it went to this big blue screen saying the windows couldnt be loaded and that I shuld check if there is any new hardware..ect, and there is nothing new in the computer. I than figured I would try killdisk and a few other methods to totally clean the hard drive thinking there could be a virus deep in the MBR and not matter what I do I keep getting the same message over and over. I may be over looking something or could be just having a blond moment as it were but I have been working on this for the last three days and I am running out of idea's.
View 2 Replies View Relatedtkrnlmp.exe could not be loade The error code is 4? I am stuck in the middle of trying to repair my windows xp professional 64 bit software. I am unable to get past this error.
View 1 Replies View Relatedthree "Fatal Error Kernel32.dll cant be loaded" messages appear everytime this laptop starts up.........have no clue what's the problem is.HELP needed...plus i can't rigt click.....so i can't get much info but it iz a win xp dell latitude d610 intel centrino notebook.
View 7 Replies View RelatedI have a ez5730us hp I can't get to loaded the OS try it start and cut of and reboot the notebook.
View 1 Replies View RelatedI recently found that my Games folder was empty. When I try to re-install the games from my XP Pro cd, I get the errors: "Setup cannot copy the file sol.hl." etc. If I cancel and try to continue setup, It just gives the same error from the next item.I tried to uninstall and reinstall the Accessories and Utilities folder and recieved the same errors. The cd is a Genuine Windows XP Professional Upgrade. It includes Service Pack 2. Version 2002. The cd is not scratched or smudged in any way and I can see the files on it when I browse the cd. I also checked my cd drive by installing two other programs from two different cds. It works fine.
There are several things that happened or I did to the computer before I lost the games but I dont want to get into the details if I dont have to (dont want to write a small novel). The most significant, I think is that I had to reactivate my copy of Windows, because I had removed my etherlink card (I only have dial-up here). Also I messed up some drivers and had to reinstall them. I'm not sure which caused the reactivation screen to pop up. When I reactivated, I couldn't connect to the internet and had to do it over the phone, so they gave me a different Product Key to use.I hope that information helps to explain my situation enough. I would just do a clean reinstall of XP, but am now afraid it wouldn't copy the files from the cd.
I have a sony vaio laptop model vgn-n220e and it came with vista which sucks by the way. I loaded xp pro on it and now i just need help finding drivers so i can get my power/battery settings back, wireless interent, sound so on, would really appreciated someone pointing me in the right direction
View 93 Replies View RelatedI have a windows xp laptop. Everytime I double click MY COMPUTER or Ddrive icons it comes up with this. I can right click and open the file though. Cheers for any tips. I have spybot loaded on my computer.
View 6 Replies View RelatedAnother problem that occurred about the same time that the "about:blank" problem showed up was one that showed that something couldn't be loaded with McAfee when the desktop was coming up (a scripting problem), and that I had to select "yes" to have java scripts to work.
View 1 Replies View RelatedI down loaded fire fox and made it my default. Also I kept explorer. I decided that I didn't want firefox so removed it. Now I can't get explorer to open any web pages.
View 10 Replies View RelatedBeen using Registaryfix v5.5 on my computer to check for problems, but the last time i used it i found that my computer seemed to hang when it loaded up windows. i used safe mode and restored my reg files using registary fix to their original state. it's working ok now but... should i trust this software, or is it because i don't know what im doing with it i should be carefull? I've posted my hijack this file also just in case i have any virus problems.
View 1 Replies View RelatedEverytime I open any word document I get around five error messages. All dll messages. I have uninstalled/reinstalled XP several times.
View 4 Replies View Relatedpop up comes up that file i386 bios.inf could not be loaded, what that means ?
View 3 Replies View RelatedI have just partitioned my hard drive on my computer running Windows Vista, renamed the partition 'X' and I wish to install Windows XP Professional.I have loaded the disk, got the Welcome screen up, clicked the green Install Windows' button and I get This programme is blocked due to incompatibility problems'. It quotes the Windows version on the equipment is more recent than the CD version.It recommends finding a solution on line.Once I get to the Windows site, I don't know what to look for.Should I have done more in setting up the partition (which is already in NTFS format.)I have to do this myself as I am not in a locality with ready help on hand.I am running a Compaq with AMD Athlon 64 X2 D C Processor with 2.87GB of memory.
View 11 Replies View RelatedI decided to help out an older friend upgrade their computer. I had an old tower lying around minus a Hard Drive, and I figured that I could remove my friends Hard Drive from his PC and pop it into my Tower and away he'd go. Well, it didn't work. The PC seemed to boot fine and showed the initial text, but when it came to the Windows XP loading-part of the boot process, the monitor flashed white for a millisecond then went blank and the power light turned to amber, then off altogether.I disabled my ATI Graphics card, then tried again with no luck so I looked in BIOS but couldn't get it to detect the drive which is a Seagate Barracuda 40GB drive.I did however notice that the HD was listed as Secondary Slave. I was able to move it up to Primary Slave by moving the jumper but couldn't set it as Master. I even tried with the jumper removed. In fact I don't recall whether or not there was a Secondary Master there is a DVD/CD Combo drive installed so maybe that was set as Secondary Master? I'm afraid I can't remember.
I then tried connecting the HD to the same cable as the DVD/CD drive with no luck. The HD is an IDE and my original HD was also a Seagate IDE drive. Also FWIW, the last time I used my Tower with an IDE HD installed ( only months ago) it all worked perfectly.After a few hours I called it a day.So, when I returned home I realised that the DVD/CD drive was probably throwing a spanner in the works and I should have unplugged it to see if that would get a result.Finally it dawned on me that my friends internal HD would have all the drivers pertaining to his particular set up (Mobo, etc) but not the drivers for my mobo and maybe that's why Windows didn't boot up.I'm left wondering if it's even possible to do what I'm trying to achieve, or would my friends IDE Hard Disc need to be wiped before installing it into my Tower? I have the ABIT VIA-1.31M driver disc that came with my mobo, but don't really know where to go from here other than to try to install the drivers for my Mobo onto my friends HD before I remove it from his PC and install it in the one I want to give to him ..
One of our computers (kids have at school) might need a reformat & XP Home reinstall. I'm wondering about the Product Key - we never had it. It is a Dell. XP Home was already installed. We have Reinstall discs. I am reading about reinstalling XP and it says to Have Your Product Key handy! I'm finding the Product Key can be ONLY be found "on the orange sticker on the back of the envelope holding the original disc." We never had original discs since XP was installed, so we don't have that enevelope or Product Key sticker - nothing. Those orange stickers seem to be the only way to find the 25-digit Product Key for XP. We have the reinstall discs and 20-digit Product Registration numbers (shown on the Registered to box on the system info box).If it turns out the computer will need to be reformatted and XP reinstalled, will the Reinstall disc know that XP was pre-installed by Dell and we didn't install it? How will it work? What information will I have to supply? (I've looked at the Dell site but feel uneasy.)
View 10 Replies View RelatedWhen a software loaded either from a CD or other sources is generally stored on C: disk where the system is located, now, I want to have all the softwares to be loaded stored on other disk , say D: disk. How could I configure?
View 7 Replies View RelatedWhile setting up a buddy's HP (no model #) desktop today with XP, we ran into this odd problem.We are having a very difficult time getting the on-board (embedded) peripherals (Ethernet, Audio and Video) to work.Almost always after loading up XP (fresh install), one is able to access the Internet by plugging in an active Ethernet cable (cable modem in this case)/But come to find out there was NO internet connection.
Further investigation revealed that there where NO drivers setup for the embedded (on-board) Ethernet, Video or the Audio peripherals.This desktop recently came out of corporate environment and had a sticker over the name of the motherboard. So we are unable to determine the make/model of it.I was however able to ID the Chipset. It's an Intel i848pG.We found what we "thought" were the correct drivers from Welcome to Intel.
I had to call a computer tech to repair my computer. The tech hooked his laptop to my computer and I believe he reflashed the bios and loaded software all from the laptop. How do you do that and what programs are needed.
View 10 Replies View RelatedI had to call a computer tech to repair my computer. The tech hooked his laptop to my computer and I believe he reflashed the bios and loaded software all from the laptop. How do you do that and what programs are needed.
View 4 Replies View RelatedI just did a load of windows updates now when I start my machine I have no taskbar or desktop icons.
Explorer.exe does not start automatically but if you go into task manager you can start it (it opens onto 'my documents').
Everything seems to open fine from here - iexplorer can be started and I can get online.
Also when I right click on the desktop I get nothing.
I was given an old Dell laptop to try to see if I can fix it. I'm not sure what was done to mess it up, but I thought I'd stick the reinstallation disk in and see what happens. When I put the reinstallation disk into the laptop to reinstall it won't kick in and automatically play. The laptop just sits there. I try to get windows xp to reload using F5, but still nothing. I tried every option under F5 and nothing will load. Its like the computer doesn't have anything in it. How can I just get the reinstallation disk to load?
View 14 Replies View RelatedI'm trying to fix my mate's PC. It's a Packard Bell with pre-loaded XP Home purchased May 2004. Apparently he got the SP2 update and then the whole thing crashed!Now on starting it is gives the F8 options (safe mode, etc) but choosing any of them results in an endless reboot. He has no Recovery Disks (floppy or CD) - a mistake I know! I'm at a loss and can't even (last resort) re-install from scratch because it was pre-loaded and have no XP CD
View 4 Replies View RelatedI recently tried to reinstall my operating system (Xp Home) on my Dell Latitude CPt I am able to boot from CD and it initializes the installer but when the Kernal Debugger starts i get an error messages that says "The File Setupdd.sys could not be loaded The error is 4 press any key to exit" is there a way to wipe the Hard Drive and start new and if so how could i do so.
View 3 Replies View RelatedIf anyone else was wondering how to get rid of the annoying Screen Savers that Microsoft feels you have to have with XP they made it a little more difficult than normal.
1. First navigate to “C:windowssystem32dllcache”. Cut and paste or type in your address bar to get there because it is a hidden folder. Once there, delete the Screen Savers in that folder. Otherwise, you will find that they will come back no matter how many times you delete them from your system 32 folder.
2. Then you have to go to C: Windowssystem32 and delete the Screen Savers you want to get rid of . (Answer the file protection popups with cancel and yes.)
3. Voila- no more Screen Savers!
It all started when none of my folders would open or "mycomputer" or any "explorer.exe" related things. So I restarted the computer, and after restart the logon screen come on. I tryed to log in but all I got was the "Loadding your personal settings".Then nothing. So Ctrl-Alt-Del the consol comes up. I tried to run explorer.exe manuly but it just blinks on the screen and then disappear.It is almost like something is killing or not letting explorer.exe stay loaded.
View 1 Replies View Related