I recently tried to reinstall my operating system (Xp Home) on my Dell Latitude CPt I am able to boot from CD and it initializes the installer but when the Kernal Debugger starts i get an error messages that says "The File Setupdd.sys could not be loaded The error is 4 press any key to exit" is there a way to wipe the Hard Drive and start new and if so how could i do so.
View 3 RepliesWhen trying to install Windows XP Pro I get the following error message "Setupdd.sys cannot be loaded error 14. Setup can not continue. Press any key to exit."
Anybody have any ideas how to solve this?
pop up comes up that file i386 bios.inf could not be loaded, what that means ?
View 3 Replies View RelatedI had to do a Windows Repair on my uncle's computer and now I am trying to install SP2 again on a CD I got awhile ago. Well about halfway through it stopped. Says it failed. Anyone know why that is and how do I fix this so SP2 installs fully? I also tried to do it off of Windows Update. Failed that way also. I also tried doing it in Safe Mode. No luck. Same thing happens. What may be causing this? I got rid of 205 spy and adaware that he never scanned for. I also ran an antivirus scan. No viruses.
View 8 Replies View RelatedHave Toshiba A135-S2276 laptop. Vista installed. Have vista recovery disk. My cyberphobic aunt wanted xp installed so it would be like her old computer.I've done the following on the laptop: Fdisk, partitioned and formatted hd in FAT32. Started the win xp pro OEM (legal license) install. It recognized the cd and everything was going well until there was a power failure when I was putting in the product code. I tried to simply restart the install and the cd was invalid media. Disk booted up to install menu in my legal win xp desktop. So it isn't totally corrupt.Laptop hd, fdisk, repartitioned, format and no startup with OEM Used set of win xp pro floppy disks to start install. OEM still invalid media. Did install with old xp pro, illegal copy. That worked. Unable to read oem. Downloaded and installed all of the win xp toshiba drivers. Had to search for the drivers as toshiba doesn't post them.
View 5 Replies View RelatedSP3 downloaded automatically but when I try to install it I get an "Access Denied" error message about half way through the installation. When I click OK on the error message it starts backing out the changes and after that Windows runs o.k. I have tried it twice with the same results. I disabled the Firewall temporarily on the second try but that didn't help. I don't know what it is trying to do when it fails because all I get is the error message.I am currently out of town so it will be next week before I can try anything but I would like to know where to start when I get home.
View 7 Replies View RelatedEverything was running fine with my desktop PC till I turned it on this morning. It booted fine, Windows XP started and I entered my password. My desktop background appeared as standard but i had no taskbar, no start button and i was geting no response from either my right or left mouse buttons from clicking on the screen. I tried to get into task manager by using CTRL+ALT+DEL hoping I could get my explorer processes running again, but nothing happened other than a brief appearance of an egg timer. I powered down and started again hoping it was just a glitch. I was too optimistic. So I tried again, again and again achieving the same results. I had no luck getting into task manager or accessing any functions at all. I assumed that if explorer wasnt providing me with rudimentary functionality and if task manager was refusing to work either my only option was to attempt a repair installation of XP using my Windows setup disk to fix the problems.
View 1 Replies View RelatedSystem info:Compaq Presario 5000, Intel celeron,600mhz,40ghd,256mb and operating system was WinME. I first upgrade to WIN XP-PRO and all was fine for a week I then decided to wipe the HD and remove the partition and then reinstall winXP-PRO. This is when my problem began. During this new installation, it gets to the "windows" installation the error message then pops up which read "Installation failed: D:I386ASMS,error message :Incorrect function."Fatal error, one of the components that windows needs to continue setup could not be installed.I am unable to pass this point.
View 4 Replies View RelatedI was wondering if you could help me. A few months ago, I was trying to install my old printer on my new XP laptop. I inserted the disk and ran into trouble because (I think) I didn't have the correct print drivers on this new computer. Instead of messing with all that, I wound up buying a new, networking printer. I have the new one installed and it works beautifully.The problem of this pop-up remains, though. I guess it's not really a problem -- just really annoying. Whenever I turn the computer on, it wants me to go through a wizard to help me complete the installation of the new device. Well, I don't want to install that old printer anymore. I've searched and searched, but can't figure out how to make that pop-up quit.
View 5 Replies View RelatedMy 20 GB HD is the master. everything was installed properly and I had no problems.
Yesterday I decided to change computer cases so I decided to transfer everything to the new case. I checked and tripple checked the hardware hook up. Every button and light works properly. When I turned on the comp, it would try to load and then it would turn off and restart on me. Thats fine, I figured I could use a format. So i put in the Original XP CD to format. Took me to the usual blue screen where it loads its drivers at the bottom, however after it loaded the Press F6 to load Raid drivers and Press F2 to do whatever, it froze on me. I can't understand why. BIOS loads everything, and it recognizes everything. I tried the whole put in the windows 98 or ME boot disk, but it would not load the drivers and then it would load from the XP cd. And yes it was set to boot from A: drive first.
I have just attempted to reinstall + format Windows XP on my laptop as I've had some serious spyware issues, however whenever I do so it fails and presents the error message of:*** STOP: 0x0000007E (0XC0000005, 0XF76120BF, 0XF7A5E208, 0XF7A5DF08).Can anyone please explain why this occurs?
View 10 Replies View RelatedSecurity Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB928366)
Strong name validation failed
SL27F.tmp
ProcessID=0xee8 (3816) , Thread id = 0xacac (3244)
I am running XP
Keeps popping up, then downloads and wont install.
I am trying to install USB serial bus controllers so as to run Tata Photon+ modem, but it shows "Access Denied and Installation failed" message. I have Administrtor permissions.
View 1 Replies View RelatedWhenever I repair/update WindowsXp setup stops during the process and reports taht Tape Controller installation failed. I then have to skip the « Tape controller installation. Otherwise setup proceeds without any other request for input. That appeared some months ago, probably after I installed some software that required it, but most likely is no longer present on my computer. I cannot find « Tape Controller » in the registry, not in any of the *.inf files in the folder Windows Inf.
View 1 Replies View RelatedI have a P3 with 256mb ram.I encountered a prob,i e the system restarted very fequently and i re installed win xp and it worked till the screen where it reads "installing devices".from there it again re starts and setup is re started.i did clean my CPU and dint work. IS it a prob of boot?
View 2 Replies View RelatedI downloaded some Registry cleaner program and I guess it was a crappy one because it must have deleted a whole bunch of important registry files. I had to reboot my system and got a message saying "ntoskrnl.exe is missing or corrupted" so in my infinite wisdom and panicked state I ran the XP recovery disks that came with my laptop (see laptop details below). But for some odd reason it just installed another version of Windows XP. Anyways after some sleuthing I used the XP disk to copy over the "ntoskrnl.exe" to my HD and all seemed okay as my original version of XP booted up okay, but then I get a blue XP screen saying "AutoChk.exe file not found- skipping AUTOCHECK" and the system restarts
View 5 Replies View RelatedI posted this on another thread but I noticed that no one has posted a reply since January 2005. I thought I would start a new topic about that the problem that I keep having.I am trying to upgrade from Windows Xp Home Edition to Windows Xp Professional. When I try to install Windows Xp Professional on my computer. I continue to receive this error message at 39 minutes during setup. Fatal Error: One of the components that windows needs to continue setup could not be installed. Error: installation failed : DI386asms. Error message: Incorrect function. I have tried reformatting my hard drive, cleaning my cds and cd drive numerous times. I have reburning the copy to three other cds (all brand new). I also tried unplugging my sound and internet connection only leaving the mouse, keyboard, and monitor connected to the computer while reformatting.
View 3 Replies View RelatedI went to install nero 7 ultra. then i realized I didnt have enough space for the whole install. I hit cancel at some point in the install and lost about a gig. My laptop has like no free room
View 6 Replies View RelatedWhile installing Windows XP, the power went out after about 40% of it had been installed. Now, when I turn on the computer, I get a message that says, "NTLDR is missing. press CTRL+ALT+DEL to reboot." Well, this becomes a never-ending cycle. So, I inserted the Windows XP cd in the cd-rom drive and booted the computer up. I tried re-installing XP and repairing XP. Neither works. So, what I would like to do is completely wipe out my hard drive (nothing I want to save) and start all over.
View 4 Replies View RelatedI am installing Windows XP Home on a computer. I just reformatted the hard drive using the Win XP CD.Now, when it goes to install, I get an error message that says Error:
SXS.DLL: Syntax error in manifest or policy file "D:I386asms6000MSFTVCRTLVCRTL.MAN on line 16.Error: Installation Failed: D:I386asms. Error Message: Data error (cyclic redundancy check).Fatal Error:One of the components that Windows needs to continue setup could not be installed.If you are installing from a CD, there might be a problem with the disc; try cleaning the disc or using another disc.
Trying to install a Dell laser printer onto someones laptop with Windows 2000. Towards the end of the installation, the computer rebooted due to a bad battery and the AC was accidently unplugged. Now right when I get into Windows before the login screen, the computer just reboots and I can barely see a flash of a STOP BSOD error but don't have any time to read it. I can get into safe mode and do stuff. I tried reinstalling the software and drivers but it gives me an error. I can't uninstall anything because it doesn't see anything installed. What can I do? Its a USB printer BTW.
View 7 Replies View RelatedI get intallshield error "1628: Failed to complete installation" when I am trying to uninstall some software I don't want.
View 1 Replies View RelatedI just tried installing Service Pack 2 on my XP, and I downloaded it and during installation it stops and simply says "Access Denied" in a little prompt, then says that installation has failed.
View 1 Replies View RelatedWhen I fired it up I found that there was only one 250 GB partition with XP on it. I thought what a waste, and decided to install Ubuntu Linux as dual boot. So I pop in the Ubuntu CD, and click install, when the partition manager comes up, I delete the 250GB partition and create three partitions, a 125gb ext3, a 122gb ntfs, and a 3gb swap. I finish installing Ubuntu and all is great.
Then I wanted to install XP again (since I deleted the whole 250 GB partition). So I pop in the XP SP2 cd, and start the setup. But when I got the to choosing partitions, it doesnt show any! The installer didnt detect any partitions! When I continue I get the follwoing error:
Quote: the problem seems to be caused by the following file: setupdd.sys
PAGE_FAULT_IN_NONPAGED_AREA
I recently just re-installed windows xp on my hp pavilion laptop. When I attempted to install the sound driver off of hp site I receive an error message stating."Driver Installation Failed: Could not find the Media device for this driver."I have a basic understanding of operating systems. If you can please explain in detail. I don't know what other information to list. So if more is necessary I do my best to provide.
View 5 Replies View RelatedMy son went to sign onto his computer and this is the message that came up Windows/system32/command.com C:/program~1/symantec/s32evnt1.dll. An installable Virtual Device Driver failed DLL installation. Choose close to terminate application
View 14 Replies View RelatedI am running version 2002 xp SP2. I need to install microsoft.net 3.5 framework for a software program. I first had to install windows installer 3.1 and did so without any problems. then I started downloading 3.5 framework and got this error message.
[05/18/10,22:30:15] VS Scenario: [2] Failed to pass the Warnings/Blocks checks in CVSScenario::Start()
[05/18/10,23:10:20] Microsoft .NET Framework 3.0a: [2] Error: Installation failed for component Microsoft .NET Framework 3.0a. MSI returned error code 1603
[05/18/10,23:11:23] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0a is not installed.
[05/19/10,11:55:39] Microsoft .NET Framework 3.0a: [2] Error: Installation failed for component Microsoft .NET Framework 3.0a. MSI returned error code 1603
[05/19/10,11:56:21] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0a is not installed.
after installing acrobat on my machine, I realised that my FILE print port for postscript printing had been deleted. Need help to reinstall the print port.
View 3 Replies View RelatedRecently tried to install a program and when it tried to load the drivers it popped up that the inf file open failed....click to exit. What or how to I repair the inf file thingy?
View 12 Replies View RelatedA friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies View RelatedI have Windows XP Home installed on my computer as my OS. Recently, I've been cleaning out my computer by uninstalling programs that I haven't used for a while. However, the uninstallation of some programs fails. For example, I have a software called JapaneseNow! (to learn Japanese) installed on my computer. However, trying to uninstall it pops up the error message that "Uninst.isu" cannot be found and therefore the uninstallation cannot continue. I already cleared off a software called SpanishNow! beforehand, which may have caused Uninst.isu to be cleared....
View 8 Replies View Related