File I386 Bios.inf Could Not Be Loaded

Aug 10, 2006

pop up comes up that file i386 bios.inf could not be loaded, what that means ?

View 3 Replies


ADVERTISEMENT

Reflashed The Bios And Loaded Software All From The Laptop?

Oct 30, 2006

I had to call a computer tech to repair my computer. The tech hooked his laptop to my computer and I believe he reflashed the bios and loaded software all from the laptop. How do you do that and what programs are needed.

View 10 Replies View Related

Reflashed The Bios And Loaded Software All From The Laptop?

Oct 30, 2006

I had to call a computer tech to repair my computer. The tech hooked his laptop to my computer and I believe he reflashed the bios and loaded software all from the laptop. How do you do that and what programs are needed.

View 4 Replies View Related

Set Up File I386/kdcom Dll Is Corrupted And Computer Wont Boot

Apr 21, 2010

I recently downloaded SP3 and I didn't have SP1a so I had to get installed that first in order to installed SP3 over it. Since then I am experiencing this problem with the above thread i386/kdcom.dll file is corrupted when I try to set up with booting with Windows XP professional CD and I do not have floppy drive to boot it with set up or repair floppies of NT operating system. Actually this problem happened due to ADOBE updates every now and then pops up to install when I do it says failed to install with reason "either your computer is running in Safe mode or windows setup is corrupted and tells me to reset it but it won't let me set it up or boot the disc.

I already have checked the CMOS bios and the prime master is the hard disc and secondary master is the CD ROM. Otherwise my PC is running fine with proper speed Also it won't let me uninstall my older version of ADOBE 9.2 program from AD REMOVE list. Please tell me what to do. The error code it gives me while trying to boot is 4096 also says INF file txtsetup.sif is corrupted.

View 5 Replies View Related

Reinstalling Xp: Line 1093 Of INF File I386 Txtsetup.sif In Invalid?

Sep 1, 2005

What do the following error messages indicate an attemp to reinstall XP Pro.cannot load: pci.sys setupdd.sys (errpr code 7) serial.sys Line 1093 of INF file I386 txtsetup.sif in invalid.

View 1 Replies View Related

Installation Failed / The File Setupdd.sys Could Not Be Loaded

Apr 24, 2006

I recently tried to reinstall my operating system (Xp Home) on my Dell Latitude CPt I am able to boot from CD and it initializes the installer but when the Kernal Debugger starts i get an error messages that says "The File Setupdd.sys could not be loaded The error is 4 press any key to exit" is there a way to wipe the Hard Drive and start new and if so how could i do so.

View 3 Replies View Related

AutoChk.exe File Not Found - Down Loaded Registry Cleaner Program

Sep 29, 2008

I downloaded some Registry cleaner program and I guess it was a crappy one because it must have deleted a whole bunch of important registry files. I had to reboot my system and got a message saying "ntoskrnl.exe is missing or corrupted" so in my infinite wisdom and panicked state I ran the XP recovery disks that came with my laptop (see laptop details below). But for some odd reason it just installed another version of Windows XP. Anyways after some sleuthing I used the XP disk to copy over the "ntoskrnl.exe" to my HD and all seemed okay as my original version of XP booted up okay, but then I get a blue XP screen saying "AutoChk.exe file not found- skipping AUTOCHECK" and the system restarts

View 5 Replies View Related

Run Sfc Without Cd - I386 Folder

May 17, 2008

I know there's a registry fix to point the command straight to the I386 folder, but I've forgotten how to. There's at least 1 file gone awol and I don't want to reload to factory settings (Crtl + F11, Dell and no XP cd).Incidentally, my I386 folder is too big to burn to cd as it's a whopping 971 MB.

View 9 Replies View Related

Can't Reformat Or Re-install - D:i386 Are Missing

Sep 26, 2007

I have been advised to reformat my laptop. I don't have too many files on my laptop so losing them won't really matter, however when i put the Windows XP cd in to my drive and start up the laptop it only goes so far and keeps saying to insert the cd as files in D:i386 are missing. When i tried to run it with my pc already started up it said "i386winntupg etupgrd.dll" was missing.

View 6 Replies View Related

Setup On Usb - Copy The Amd64 Instead Of The I386?

Jun 7, 2008

I have been reading up on getting a xp setup to work on a usb. On alot of websites it says to copy the i386 folder. On my setup cd i see that it has a amd64 folder. My computer is an amd so do i copy the amd64 instead of the i386? Is the i386 only for intel and amd64 for amd?

View 1 Replies View Related

Remove File Saved On My Computer Through The BIOS Set Up?

May 28, 2010

Is there a way to remove or delete some files on the computer through the BIOS Set Up. Because my pc is not working properly as it keeps on loading because of the software/files that is currently saved on my pc...it really messed up my computer..won't even do some commands on the computer.

View 1 Replies View Related

Cannot Upgrade G:i386 Winntupg Netupgrd.dll Missing

Dec 12, 2007

well i want to intall windows xp again but i dont want to format it i just want to upgrade it but when i insert the cd and press install windows xp it appears a messege that says that i cannot upgrade because this file ----> "G:i386winntupg etupgrd.dll " is missing... what do i do? how do i fix this?

View 2 Replies View Related

Deleting Downloaded File: Bios Update From Desktop?

Sep 15, 2007

I downloaded a bios update from Dell. After using it, I can not delet it from my desktop. I get a message that says, " Close any programs that might be using this program and try again". This has happened to me one other time. The way I got rid of it that time was using "system restore". I would rather not do that this time.

View 3 Replies View Related

Changed BIOS Password: PC Shut Downs & Reboot BIOS Keep Coming?

Aug 14, 2008

once the on button was pushed, it came up with the BIOS screen asking for the password.I removed the CMOS battery, which allowed me to change the Password so I can get onto BIOS now. However, when I boot now it just comes up with the BIOS screen.I set HD to boot first, aswell as setting the clock and date. I then ask it to save and quit, after which it shut's down, and reboots, only, BIOS keeps coming up. And I need to get this sorted asap

View 14 Replies View Related

Repair Bios Installation / Hanging On Parts Of The Bios POST Screen

Oct 21, 2009

I have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.

View 5 Replies View Related

Computer Starts To Bios Screen - Checked BIOS Settings

Apr 7, 2007

When I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.

View 1 Replies View Related

System Failing Before Bios / Occasionally Freezes In Bios

Aug 10, 2006

Got a bit of a problem with my housemates pc.A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the dust and refitted it with some new thermal compound.I added too much and the temp went up. To nearly 90 degrees.I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.Now we have the problem. Most of the time: Power on and nothing happens. No bios, no beeps. Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.?I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).

View 5 Replies View Related

Upgrading BIOS On Award Modular BIOS

Sep 10, 2005

Im new to PCs and since my motherboard is three years old is it a good idea to upgrade? I contacted the maker of my motherboard and they say an upgrade is available and sent it to me for { DON'T CRACKUP} $49.00. I already read that you can really mess up your PC if you do one thing wrong when upgrading. Am I a fool for buying the upgrade? Please let me know as I can send the Floppy discs back.

View 2 Replies View Related

System BIOS And Video BIOS Shadowed

Aug 18, 2008

I have ibm thinkpad R51 2887 nq2 series .My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.

View 1 Replies View Related

MBR2 After Flashing BIOS - Upgrade BIOS

Jan 23, 2007

I just flashed/upgraded my BIOS for my motherboard, and now XP doesn't even boot up.
After the BIOS load, I get a "MBR error 2" message and it just stays there.
My board is an Asus P5N32-SLI SE Deluxe. I used the Asus Update Utility to flash my BIOS.

View 12 Replies View Related

E:\i386\asms Error Message: Error Performing Inpage Operation?

Sep 25, 2010

I have a Dell Inspirion laptop and have formated the HD and removed the partions. Have tried booting from a USB HD and have also tried another burned disk. No change will not install.

View 1 Replies View Related

Cannot Be Loaded Or Reinstalled

Aug 21, 2007

My younger sister was playing on the "Neopets" website. She loaded up a browser-based game called "Shenkuu River Rush". As I understand, to do this, she needed to download the "3D Life Player". The game worked fine for a while, but then started to run slow, so she restarted the computer. When she restarted, it still ran slow. She was also running the latest version of MSN/Windows Live Messenger. Finally, she loaded up the game and the computer pretty much froze (impossible to do anything, and showed no signs of resolving) so I came and shut it down manually.When I switched it on again, the computer went into the usual "We apologize for the incovenience, but Windows did not start successfully." screen. Thinking nothing of it, I selected "Start Windows Normally" and hit enter. The screen stayed on the Windows XP loading screen for a while, then flickered to a BSOD (I couldn't out what it was at this point) and restarted. This time, I selected "Last Known Good Configuration", and the exact same thing happened. I then tried running it in Safe Mode (both regular and command line)

The computer came with Windows XP loaded on it (I think it might've been Home Edition?), but I had a Windows XP Professional disk so I booted up from that. The "Windows Setup" screen comes up, and at the bottom of the screen, as is routine, the "Setup is loading files..." message is present. Just when all the files are seemingly loaded, and the message at the bottom of the screen flickers to "Setup is loading Windows.

View 12 Replies View Related

Specified Module Could Not Be Loaded

Jun 7, 2005

When I start windows XP, I get the message (error loading DOCEOC 1681 )The specified module could not be loaded.

View 7 Replies View Related

Need SP1 Or SP1a Loaded First

Jan 4, 2009

I have aquired an older laptop that has XP Home on it that has not had the windows Service Packs installed. I tried to load SP3 from a CD, but found that I needed SP1 or SP1a loaded first. Where can I safely get this outdated software ?

View 6 Replies View Related

AOL Not Responding After Loaded

Feb 20, 2005

When I run AOL 7.0, it always says not responding after it has loaded. I tried uninstalling and installed it a gain and it still doesn't work.

View 14 Replies View Related

Would Not Be Loaded - Blue Screen

Feb 9, 2005

I'm trying to fix my friend Emachine that he got about a year ago, it has a 80 gig hard drive, 512 ram. When I took a look at it I tried to boot it up and it started to load windows xp and then just stopped and started over again and kept reapting this process untill I shut down the computer. I continued to us fdisk and format at the dos promt to format the disk and then tried to load windows xp over again. It got almost all the way done then it went to this big blue screen saying the windows couldnt be loaded and that I shuld check if there is any new hardware..ect, and there is nothing new in the computer. I than figured I would try killdisk and a few other methods to totally clean the hard drive thinking there could be a virus deep in the MBR and not matter what I do I keep getting the same message over and over. I may be over looking something or could be just having a blond moment as it were but I have been working on this for the last three days and I am running out of idea's.

View 2 Replies View Related

Amd64tkrnlmp.exe Could Not Be Loaded - Error 4

Feb 18, 2007

tkrnlmp.exe could not be loade The error code is 4? I am stuck in the middle of trying to repair my windows xp professional 64 bit software. I am unable to get past this error.

View 1 Replies View Related

Fatal Kernel32.dll - Cant Be Loaded

Dec 20, 2006

three "Fatal Error Kernel32.dll cant be loaded" messages appear everytime this laptop starts up.........have no clue what's the problem is.HELP needed...plus i can't rigt click.....so i can't get much info but it iz a win xp dell latitude d610 intel centrino notebook.

View 7 Replies View Related

Boot Cd Hp Pavilion / Can't Get To Loaded The OS

May 16, 2010

I have a ez5730us hp I can't get to loaded the OS try it start and cut of and reboot the notebook.

View 1 Replies View Related

Lost Pre Loaded Games

Mar 9, 2007

I recently found that my Games folder was empty. When I try to re-install the games from my XP Pro cd, I get the errors: "Setup cannot copy the file sol.hl." etc. If I cancel and try to continue setup, It just gives the same error from the next item.I tried to uninstall and reinstall the Accessories and Utilities folder and recieved the same errors. The cd is a Genuine Windows XP Professional Upgrade. It includes Service Pack 2. Version 2002. The cd is not scratched or smudged in any way and I can see the files on it when I browse the cd. I also checked my cd drive by installing two other programs from two different cds. It works fine.
There are several things that happened or I did to the computer before I lost the games but I dont want to get into the details if I dont have to (dont want to write a small novel). The most significant, I think is that I had to reactivate my copy of Windows, because I had removed my etherlink card (I only have dial-up here). Also I messed up some drivers and had to reinstall them. I'm not sure which caused the reactivation screen to pop up. When I reactivated, I couldn't connect to the internet and had to do it over the phone, so they gave me a different Product Key to use.I hope that information helps to explain my situation enough. I would just do a clean reinstall of XP, but am now afraid it wouldn't copy the files from the cd.

View 3 Replies View Related

Just Erased Vista And Loaded XP

Apr 10, 2007

I have a sony vaio laptop model vgn-n220e and it came with vista which sucks by the way. I loaded xp pro on it and now i just need help finding drivers so i can get my power/battery settings back, wireless interent, sound so on, would really appreciated someone pointing me in the right direction

View 93 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved