Set Up File I386/kdcom Dll Is Corrupted And Computer Wont Boot
Apr 21, 2010
I recently downloaded SP3 and I didn't have SP1a so I had to get installed that first in order to installed SP3 over it. Since then I am experiencing this problem with the above thread i386/kdcom.dll file is corrupted when I try to set up with booting with Windows XP professional CD and I do not have floppy drive to boot it with set up or repair floppies of NT operating system. Actually this problem happened due to ADOBE updates every now and then pops up to install when I do it says failed to install with reason "either your computer is running in Safe mode or windows setup is corrupted and tells me to reset it but it won't let me set it up or boot the disc.
I already have checked the CMOS bios and the prime master is the hard disc and secondary master is the CD ROM. Otherwise my PC is running fine with proper speed Also it won't let me uninstall my older version of ADOBE 9.2 program from AD REMOVE list. Please tell me what to do. The error code it gives me while trying to boot is 4096 also says INF file txtsetup.sif is corrupted.
On my xp machine i get an unmountable boot volume error. Which says my boot.ini file may be corrupted. So im attempting to reformat but even with my xp disk in i still get the same error followed by a choice to restore previous settings, and two other choices which all end in a blue screen.Does the hard drive need to be or Is there anyway i can boot up in dos to reformat?
My computer is a Dell Inspiron 6000 running Microsoft XP Home. My machine did not ship with a XP Home setup CD so I cannot follow the windows prompt. I have heard about dell system restore CDs, however I'm not sure if one came with my machine, and if so where it is. If this is what I need can an ISO be downloaded anywhere online? I do know that there is some type of partition on my HD, however I'm not sure exactly what it consists of or how to find out.In case anyone asks, I cannot boot windows in safe mode. If possible I would like to try to repair this problem without a complete reformat and reinstall as my data is only partially backed up. Additionally I have considered the possibility that this issue is the result of a HD crash, however I am not sure how I would go about testing this. Lastly if a reformat and re-install is necessary is there anyway to backup "My Documents" without starting windows?
can anyone tell me how to overcome a boot problem.When starting a computer that has not been used for some time it fails to boot from any disk i.e. floppy, hard drive or cd.It gets so far then this message appears,corrupted file dac2w2k.sys even with Windows XP setup floppies.It gets to the GeForce splash screen then just keeps repeating to this point.
I get an error on boot up telling me that the config file is corrupted or missing. IT also states to please insert CD to try and repair this problem. Press "r" before the first screen. If I do that will it try and reinstall XP? Will I lose all my data?
What do the following error messages indicate an attemp to reinstall XP Pro.cannot load: pci.sys setupdd.sys (errpr code 7) serial.sys Line 1093 of INF file I386 txtsetup.sif in invalid.
I am running Win XP Mediaa Center Edition 2005 and have just received a message on the second boot up page saying: Windows cannot load because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You may attempt to recover or repair this file using the original Windows CD
I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
I have had this problem for quite a time now. Everytime I try to download a file it is corrupt.For instance, I tried downloading a movie clip off rapidshare and although its only 3 files and 300MB, it always came as CRC error check failed. I tried downloading it from multiple servers of rapidshare but had no success. I also tried downloading other files yet I am having no success downloading anything.
I cloned a hard drive which had Windows XP on it (the hard drive was going out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
I am running Windows XP Professional. I am trying to delete some of my Internet links from my Favorite Folder, but the error message I get is "Cannot Delete [name of link]: The file or directory is corrupted and unreadable." I have tried overwriting it with a file of the same file name, but I only get a new error message which says, "Cannot move [name of link]: A file with the name you specified already exists. Specify a different file name".
I have even tried shifting to Safe Mode, but to no avail. I still get the same messages. When I double-click on these files, I get the error message saying, "The target "" of this Internet Shortcut is not valid. Go to the Internet property sheet and make sure the target is correct". I cannot even move them out of the folder into another one that I made that I named "Dead Shortcuts". When I tried to move them, I got yet another error message saying, "Cannot move [name of link]: The file or directory is corrupted or unreadable". When I open Properties, nothing is there except the "General" tab. There is no "Web Document" tab or "Security" tab.
i have had my computer for about a week and a half and it has XP. i bought a wireless USB card thing and it was screwing up my computer a bit in the early going. now, when i turn on my computer it comes to the screen to selet safemode and stuff but i cant get it to boot at all, it trys but stops on some file that ends with mup.sys. anyone have a clue how i can fix it through DOS or anything at all? the system recovery discs that came with my computer are pure crap. they have an error on the second screen of the process and then restart my computer
I recently reinstalled Windows XP Home w/SP2 on a system and everything worked well. I also installed a Seagate 500 GB HDD as a slave drive. I had no problems assigning a drive letter (D:) and mapping it as a network drive. Then yesterday, a Windows error message popped up saying there was "Delayed Write Failure" or something similar. It was at that point the the slave drive became inaccessible. I can still see the drive in My Computer but that is all. I went into disk management and click on properties, it says the file system is "RAW". I have no idea what that means.
The drive is still assigning a drive letter (d:) and it says is it is healthy (active). However, when I try exploring the drive it says "D: is not accessible. The file or directory is corrupted and unreadable"." I then tried using CHKDSK to check the drive for errors in the DOS prompt. But again, nothing happened. I used Seagate Diagnostic tools to scan the drive for errors. There is nothing physically wrong with the drive as it passed all the tests except for the file structure test.
My CD ROM/DVD player recently stopped working on my Omitech computer. From My Computer - I can't see the drive anymore. In the device manager - it has a yellow exclamation mark on it. I tried updating the driver but the message was that the software was already the best match. I tried uninstalling and reinstalling but it says a file is missing or corrupt. I bought a new external CD ROM - but have the exact same problem with it. I went to Run and put in sfc /scannow and there were problems that maybe could be fixed - if only it could read the XP CD - then it could fix the CD ROM. But it can't read the CD because of the problem with the CD ROM. (a whole in my bucket story.) So - how can I fix the problem if it wants a CD to fix the problem but the CD ROM is not working to read the CD?
I believe I have committed a fundamental eejit blunder. For reasons that are too complicated to explore here I cleaned my 140 gig Seagate C Drive (no, not that reason) with two wipes using the Kill Disk programme. I then re-installed XP Pro which also includes a formatting phase. All appeared well as I installed AVG anti-virus, Zone Alarm Pro, and Ad Aware; I then loaded Picasa, Adobe and all the bits and pieces that make for fun and utility.
I know there's a registry fix to point the command straight to the I386 folder, but I've forgotten how to. There's at least 1 file gone awol and I don't want to reload to factory settings (Crtl + F11, Dell and no XP cd).Incidentally, my I386 folder is too big to burn to cd as it's a whopping 971 MB.
i have a problem with a file in the my documents folder it has an error message saying its corrupted or unreadable i can not delete it or remove it but i can rename it it used to be called downloads folder mcafee found a virus in it once i think it locked the file but mcafee is deleted from my pc i have norton internet security 2007 now i am wondering if there is a way to remove it i renamed the downloads folder to corrupted file and marked at as hidden but i would like to remove it also windows check disk keeps wanting to run every tme windows starts and its getting annoying
I really need some help here. I have a second HD with no OP system on which I just use to store most of my music, pics, documents etc. The problem is when I click on one of the folders (my most important one I get the message "file or directory is corrupted and unreadable"I really need to get to this folder,
I have two partitions on the same drive and both had Win XP installed. I decided to reformat the second partition, and for no particular reason decided to install Win 2000 there. Now on boot up I get the normal boot.ini menu but if I choose XP I get an error that says Win 2000 has a missing or corrupted file: WINDOWSSYSTEM32CONFIGSYSTEMd……..SYSTEMd not a misprint! I hit reset and choose Win2000 at the boot menu and Win 2000 comes up OK . I tried to repair 2000 and I re-installed it but still get the same error. I tried modifying the boot.ini file but it didn't.
Some of my files on my D: drive have been compressed by the clean-up wizard. Now, certain programs won't run because their data files are "corrupted". Is there a way to "un"compress the files?
how would you determine if you're MBR is corrupted? Here is the situation: The user boots up his Windows XP Pro SP2 machine, it does the normal POST and gets to the splash screen, however, it seems after that it will display a standard "Microsoft Apologizes but Windows did not boot properly... please select from one of the options..."
When this comes up, we attempt to launch windows into Safe Mode. It runs displays the some messages (more on the lines of what seems to be in the autoexec.bat file) but suddenly the PC reboots. It does the POST again and then the splash screen then bam same message as above. So we try the Last Known Good Configuration option but it does the same thing. Reboots the PC and gets to that screen.
I have a Dell Dimension 5100 with Winxp pro sp3 1 Meg of RAM and extra 500 gig hd: I changed (increaded) the Page File zise (Virtual Memory) on both drives and it corrupted the Registry. Now it does not even let me re-install winxp on that drive. Towards the end of the installation I get a message that it cannot copy certain files. The file names varies according to the SP version on the winxp pro cd. Also, I lost the original OS disk from DELL.
For the past few weeks everytime I restarted my computer, I would get a message saying that windows "did not start because file sym_hi.sys is corrupted." Then i would press enter and windows would start.I decided to reinstall windows.... at the beginning during copying installation files an error pops up that says:An error occured copying file sym_hi.sys to C:$WIN_NT$.~BTsym_hi.sy_.-data error (cyclic redundancy check)-
I have a Toshiba Protege laptop, at boot up I get the error message'Windows could not start because the following file is missing or corrupt:windows system 32configsystem It suggests trying a repair from windows CD.When I boot to windows xp pro cd, there is no option to repair, only option is new install I also have bootable cd with a load of tools on, I have tried running chkdsk and it says the disk is RAW.
pagefile.sys is corrupted since it is fixed a 2GB whatever setting (no page file, system managed...). I choose in the virtual memory panel. I can't changed its size and would like to delete it so windows xp (sp2) can recreate a new correct one. the purge at shutdown does not work too and I don't know the password for the recovery console under the DOS. I am looking for a simple solution to delete this file which is on an ntfs partition.
i used my Xp disk to partition my slave hd in my desktop since i have done this i get an option when i boot of two windows xp to start.The first has something to do with me mucking around with the slave drive and the second is my actual sytem os It automatically tries to boot from the first and faulters saying there is system files missing.I can boot from the second option fine but i dont want to allways have to be changing options everytime i reboot I would like to know if there is a way through my bios (or xp itself )that i can delete this option on booting
Suddenly yesterday, my laptop would not boot into Windows.. runs windows xp normally.It would also not boot into safe mode.I took the hard drive out and took it to a colleagues office to get the data off with an external hd connector.He advised that my partition table had been damaged, and the data was not accessible via normal means.Wants to charge $150.00 to get the data off. At this stage, I am wanting to make sure I get my data back, so I authorized this but I am wondering, if anyone can speak to what might have caused this to happen.I do not remember installing any programs or doing anything subject prior to this occurring..
I have been advised to reformat my laptop. I don't have too many files on my laptop so losing them won't really matter, however when i put the Windows XP cd in to my drive and start up the laptop it only goes so far and keeps saying to insert the cd as files in D:i386 are missing. When i tried to run it with my pc already started up it said "i386winntupg etupgrd.dll" was missing.
