I have a Toshiba Protege laptop, at boot up I get the error message'Windows could not start because the following file is missing or corrupt:windows system 32configsystem It suggests trying a repair from windows CD.When I boot to windows xp pro cd, there is no option to repair, only option is new install I also have bootable cd with a load of tools on, I have tried running chkdsk and it says the disk is RAW.
View 2 RepliesThe system can be restored by using the Startup CD and pressing R for recover, but I do not have any cd. The only one I have it the recover cd, but it is my understanding that if I use the recovery cd that I will erase everything from my computer and I can not do this.I tried to read the other threads about the same problem, but to be honest I do not understand them and I just do not have the startup cd - maybe it is the same as the recovery cd?
View 9 Replies View RelatedWhen booting a computer comes up with a message saying that the following file is either missing or corrupt...C:WINDOWSsystem32configSystem It then sits there! Doin' nothing btw, the same happens in both normal and safe modes, last known good conficuration does not help, plus it also freezes when trying to log on to the recovery console.
View 2 Replies View RelatedWindows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM This is the error message i have. I have a copy of windows xp pro. i have no backup disk.
View 13 Replies View Relatedwhile logged into Windows, the IDE cable that is connected to my HD went bad. I double checked this by replacing the cable and seeing if the BIOS could see it, which it could. When I tried to log back into Windows however I got this message. Code: Windows could not start becuase the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEMYou can attempt to repair this file by starting Windows Setup using the orginal Setup CD-ROM.Select 'r' at the first screen to start repair.I'm not sure how this works. Do I hit 'r' at the blue screen after it loads all the drivers or do let it setup and I will get a chance to choose a repair option. The error only effects Windows. I know for sure because I have a Linux partition that works fine. I have my orgainl Windows XP CD- ROM. Does anyone know the steps to fix this? Windows XP SP2 (Fully upgraded)(CD-ROM is the orginal XP SP1 disk)
View 3 Replies View RelatedI get an error on boot up telling me that the config file is corrupted or missing. IT also states to please insert CD to try and repair this problem. Press "r" before the first screen. If I do that will it try and reinstall XP? Will I lose all my data?
View 7 Replies View RelatedFor the past few weeks everytime I restarted my computer, I would get a message saying that windows "did not start because file sym_hi.sys is corrupted." Then i would press enter and windows would start.I decided to reinstall windows.... at the beginning during copying installation files an error pops up that says:An error occured copying file sym_hi.sys to C:$WIN_NT$.~BTsym_hi.sy_.-data error (cyclic redundancy check)-
View 9 Replies View RelatedTrying to repair my son's laptop--Dell Inspiron 6000 running XP professional, cannot start-up due to above error message.tried steps outlined in link below from Microsoft, but get "access is denied" at every prompt
View 8 Replies View RelatedI am new at this so I will try and post as much relevant (or possibly no) information in hopes not to waste anyone's time. I receive the following message each time I boot up my Dell Latitude 400 with Windows XP update with SP1 and 2: Windows could not start because the following file is corrupt or missing: windowssystem32configsystem. You can attempt to repair this file starting Windows Setup using the original Setup cd-rom. select "r" at the first screen to start repair.
My Problem is,I got an error come up "windowssystem32configsystem" missing or corrupt.How do I repair the registry without a windows xp disc and is it easy if it can be done
View 1 Replies View RelatedWhen i startup my computer i get this message.."WIndows cannot start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEM"
I was exiting a game and windows started getting really slow and i could not click on anything so i held my power button on my computer and shut it off. When I started it again it said "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem" then it says I can put my original CD in and go to the recovery console. When I did this I got to the first step in a tutorial online where I type "copy c:windowsystem.... etc"
View 6 Replies View RelatedSo my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
View 14 Replies View Relatedi have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
View 5 Replies View RelatedCannot run msconfig, but can locate the file on the computer.
View 6 Replies View RelatedI'm running a Dell XPS 600 with Windows XP Professional Media Center Edition. Well, OK, it's not really running.I used System Restore to return my PC to a point about six weeks ago when the system was more stable. The PC rebooted, and now it won't boot any more due to a missing/corrupt CONFIGSYSTEM file.It won't boot from either of my CD drives, either. I've used the boot Setup to alter the boot sequence but that doesn't help, the system just doesnt recognize those drives during boot. For this same reason, I've been unable to access the Recovery Console.
View 5 Replies View RelatedSo i booted my t400 ibm laptop and this error message popped up as stated in the message title.My harddrive is in achi mode and i was wondering if i switch the harddrive mode and do a repair with an xp cd, will i lose any files?
View 1 Replies View RelatedI was on my computer when I was done I decided to actually turn it off which I never do I always leave it running. My computer was working completely fine I ran virus scans all that shizz, the next day I turn it on and it says:Windows could not start because the following file is missing or corrupt windowssystem 32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 1 Replies View RelatedI have encountered another problem!
Ok, so, my computer wouldn't boot up right? I had to repair the installation etc and activate Windows, which I did today. The just recently, I was in safe mode trying to fix the PC, and then it restarted, and now everytime I try to start it up, it says,
The file Windows...../config/SYSTEM is missing or corrupt and it says I have to repair Windows, using the disk.
Small irritating issue here, I have a pc running WindowsXP Pro and every time the system is rebooted I get the System Configuration Utility box come up, the one saying, "You have used the System Config Utility to make changes to the way windows starts.etc." I have seen this before and am use to it as I use the utility to stop alot of apps. The difference this time is that I cannot get the box from appearing after each startup. I have checked the box that says "Don't show this message or launch the system configuration utility when windows starts", but it shows up every time. I have also tried to remove this from the registry.
View 1 Replies View RelatedI am one of the many who had succumbed to this problem: C:WINDOWSsystem32configSYSTEM missing or corrupt. I am running windows XP home edition on an HP Dv2000 notebook, and have tried almost everything. Repair console wont work as is says it cannot find hard drive, and yet when I go into Bios it says it is there (Notebook HDD) (a SATA btw) . Running a check on the hard drive yeilds nothing but a fit bill of health. I cannot access command prompt, or any safe mode. Running a HP recovery install is also fixing nothing. I am stuck with a laptop that just keeps cycling around in circles, constantly rebooting itself.
View 14 Replies View RelatedMy problem started when I booted my computer. Windows (XP Home Edition) started with the message that windows/system32/config/system.sav was missing or corrupt. It told me to use the recovery console to solve the problem. I saw with the recovery console that the system.sav file wasn't missing so it had to be corrupt (0 bytes in filesize).
View 1 Replies View RelatedWindows could not start because the following file is missing or corrupt: /windows/system32/config/system
It states that I can put in the originial setup CD-ROM and select 'r' to start repair but that doesn't help me. My laptop did not come with a windows cd as I bought it preloaded from BestBuy. So about 4 years ago when my computer was overcome with the Sasser worm, I reformatted and loaded a friend of mine's Win XP Pro cd on my laptop. I still have the CD but when I hit 'r' (Boot partition recovery) it does its little DOS thing and then gives me a Disk I/O Error. I am thinking that maybe it is trying to boot from a floppy drive and not my CD drive and thats why I am getting the I/O error?
When I start up my laptop, the screen immediatly says Windows could not start because the following file is missing or corrupt: windowssystem32configsystem
You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair.The deal is I dont have the cd. IF someone could tell me how to get an xp cd (without buying) that'd be great.
Acer laptop (TravelMate 4020) that operates using Windows XP. When I started up my computer the other day, I received the following message: "Windows could not start because the following file is missing or corrupt:WindowsSystem32ConfigSystem You can attempt to repair this file by starting Windows setup and using the original setup CD-rom. Select 'r' at first screen to start repair."
View 8 Replies View Relatedmy file windows/system32/config/system is corrupt. it says i can boot with the CD and use the "R"epair function. I do that and it takes me to DOS where I can roam around my harddrive and the windows CD. now how do I find this file to replace it? because on the windwos CD there is no "system" file in the directory I386/system32/config/. I've tried to copy it from my other computer, but since it's using the file I cant'!
View 2 Replies View RelatedI have a IBM comnputer and I used my sisters reboot disks. She has a set of five disks to use.. they say IBM/Leveno ghost. When I tried to wipe my system clean and reboot, it said "the following file is missing or corrupt" /WINDOWS/system32/config/SYSTEM
View 6 Replies View RelatedWhen I start the laptop, the first black screen loads, and then directly skips to an error message saying "Windows cannot start because the Windows/system32/ config/system file is either corrupt or missing." Then it prompts you to try to load Windows using the installation CD.which I do not have! Whoever's reading this, PLEASE please help me, the laptop's like, my life, and I haven't had the common sense to back up anything
View 12 Replies View RelatedMy CD ROM/DVD player recently stopped working on my Omitech computer. From My Computer - I can't see the drive anymore. In the device manager - it has a yellow exclamation mark on it. I tried updating the driver but the message was that the software was already the best match. I tried uninstalling and reinstalling but it says a file is missing or corrupt. I bought a new external CD ROM - but have the exact same problem with it. I went to Run and put in sfc /scannow and there were problems that maybe could be fixed - if only it could read the XP CD - then it could fix the CD ROM. But it can't read the CD because of the problem with the CD ROM. (a whole in my bucket story.) So - how can I fix the problem if it wants a CD to fix the problem but the CD ROM is not working to read the CD?
View 3 Replies View Relatedcan anyone tell me how to overcome a boot problem.When starting a computer that has not been used for some time it fails to boot from any disk i.e. floppy, hard drive or cd.It gets so far then this message appears,corrupted file dac2w2k.sys even with Windows XP setup floppies.It gets to the GeForce splash screen then just keeps repeating to this point.
View 14 Replies View Related