Two Xp Options On Boot: One Is Corrupted Other Is Fine?
Aug 25, 2008
i used my Xp disk to partition my slave hd in my desktop since i have done this i get an option when i boot of two windows xp to start.The first has something to do with me mucking around with the slave drive and the second is my actual sytem os It automatically tries to boot from the first and faulters saying there is system files missing.I can boot from the second option fine but i dont want to allways have to be changing options everytime i reboot I would like to know if there is a way through my bios (or xp itself )that i can delete this option on booting
Recently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
I have a computer that I formatted the hard drive on. Then installed Windows XP Pro. When it boots up, it goes to a black screen and has Windows XP Pro and Windows XP listed with the Win XP Pro selected and boots to it in 15 seconds or so if nothing is selected. I have read somewhere about this before and have NO clue where I read it, but does anyone know how to get rid of the option (Win XP) that really doesn't even exist on the hard drive?
Well, Ive tried reinstalling XP 3 times. This third time, after a clean installation, I realized that Safe Mode works fine after 500 errors are thrown at me. That is what I am in right now: Windows XP Safe Mode with Networking. First off, after I see the Windows XP Professional loading screen, my screen freezes into a God awful mess. So when I restart, I go into Safe Mode, it gives me a bazillion(which is a real word in FireFox 2.0's dictionary) errors that look like so
I went home at lunch time and went to use my computer.The screen saver was on but not moving. I moved the mouse, still did nothing.I had to turn the computer off with the powerbutton.It is a HP Pavilion A1310N I turned it back on and it gets to the HP Blue Screen. About 3 seconds after startup.Does nothing else. When I turn the comptuer on i see the 3 lights on the Keyboard but then goes away.And any option at this screen like the F2 F10 or the ESC do not work.Sounds like the Harddrive is running fine.But just sits on that screen.Reboot and same thing.I did reseat the SATA and power cables on the Drive just to make sure.
I cloned a hard drive which had Windows XP on it (the hard drive was going out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
On my xp machine i get an unmountable boot volume error. Which says my boot.ini file may be corrupted. So im attempting to reformat but even with my xp disk in i still get the same error followed by a choice to restore previous settings, and two other choices which all end in a blue screen.Does the hard drive need to be or Is there anyway i can boot up in dos to reformat?
I have a problem with windows 2k or at least when it's booting up.When my computer boots, it asks me if I want to run win xp, win 2k, or win 2k start up. I just want it to boot directly to 2k without prompting me.
I recently reformatted and repartitioned hard drive and reinstalled XP. I messed something up because now when I boot comp, I'm given three different Windows XP options to boot even though I have only one instance of XP installed. What do I have to do to get rid of the two unwanted boot options?
When i booted up my pc to put some coursework on a usb stick, it failed to boot to xp. It went to the "xp was not shutdown properly,boot to safe mode, or last known working settings screen, ETC". None of the options work, i have tried all of them, safe mode and last known working settings included. When i select one of the options, the hardrive spins up, and then my gfx card bios info and mobo splash screen come on. Well, i think it might be because i ran a 'virus remover' for the game gmod, this was the first time the computer had been booted since i ran it.
how would you determine if you're MBR is corrupted? Here is the situation: The user boots up his Windows XP Pro SP2 machine, it does the normal POST and gets to the splash screen, however, it seems after that it will display a standard "Microsoft Apologizes but Windows did not boot properly... please select from one of the options..."
When this comes up, we attempt to launch windows into Safe Mode. It runs displays the some messages (more on the lines of what seems to be in the autoexec.bat file) but suddenly the PC reboots. It does the POST again and then the splash screen then bam same message as above. So we try the Last Known Good Configuration option but it does the same thing. Reboots the PC and gets to that screen.
My computer is a Dell Inspiron 6000 running Microsoft XP Home. My machine did not ship with a XP Home setup CD so I cannot follow the windows prompt. I have heard about dell system restore CDs, however I'm not sure if one came with my machine, and if so where it is. If this is what I need can an ISO be downloaded anywhere online? I do know that there is some type of partition on my HD, however I'm not sure exactly what it consists of or how to find out.In case anyone asks, I cannot boot windows in safe mode. If possible I would like to try to repair this problem without a complete reformat and reinstall as my data is only partially backed up. Additionally I have considered the possibility that this issue is the result of a HD crash, however I am not sure how I would go about testing this. Lastly if a reformat and re-install is necessary is there anyway to backup "My Documents" without starting windows?
Suddenly yesterday, my laptop would not boot into Windows.. runs windows xp normally.It would also not boot into safe mode.I took the hard drive out and took it to a colleagues office to get the data off with an external hd connector.He advised that my partition table had been damaged, and the data was not accessible via normal means.Wants to charge $150.00 to get the data off. At this stage, I am wanting to make sure I get my data back, so I authorized this but I am wondering, if anyone can speak to what might have caused this to happen.I do not remember installing any programs or doing anything subject prior to this occurring..
i have an asus p5nsli, i cant see windows xp because of a new acer display driver that doesnt work, apparently. on bootup, when i press F8, i only get the options to boot from floppy, hd, or cd-drives....how can i get to safe mode? pressing delete gives me the bios, i've tried every key on the board.
I had a problem on booting which is caused by a virus which had corrupted some of the system files. All my efforts to get the system restore had failed. How do I get into the system to go to system restore points. All my efforts to choose all the alternatives in the screen such as safe boot, last known good configuration etc failed. It goes on a cyclic mode again and again coming to the same screen.In such a condition how to go to my system restore point to choose the earlier restore point.
Recently, I had to use the command "bootcfg /rebuild", which fixed a booting problem I was experiencing. However, now it asks what OS I'd like to boot from every time. The problem: It shows "Microsoft XP Home Edition" Twice. Is there any way to fix this and to just allow XP to boot automatically every time without prompt?
can anyone tell me how to overcome a boot problem.When starting a computer that has not been used for some time it fails to boot from any disk i.e. floppy, hard drive or cd.It gets so far then this message appears,corrupted file dac2w2k.sys even with Windows XP setup floppies.It gets to the GeForce splash screen then just keeps repeating to this point.
I get an error on boot up telling me that the config file is corrupted or missing. IT also states to please insert CD to try and repair this problem. Press "r" before the first screen. If I do that will it try and reinstall XP? Will I lose all my data?
I'm running Windows 2000 Professional, and encounter the problem: "The file hal.dll is missing, please replace it or reinstall it". That shows up when i try to boot it up.When restarted, it looks like its about to load windows 2000, then it stops and says"The file Hal.dll is missing or corrupted,please reinstall to replace it" . I wanted to go to safe mode, but it wont load because of that corrupted file.
just had a machine where the boot ini had been currpted so do a chkdsk /p then a fixboot in the recovery console and it came back fine. But now it boots soooooooooooooo slow about 1-2 mins but once up it is fine. It shuts down fina as well. Done all scans virus adaware etc so the machine is now clean. So how do I speed up the boot.
Isn't F8 supposed to bring up the boot options for win XP? It's not working. I've tried F1, F4, Esc, and Delete, F8 function is not working and that I'll need to fix this somehow.
Right now when I boot my screen I have like 4 different options for what OS I want. There Windows XP (which I usually click), a Skeleton Boot (some boot screen program I was screwing with), another Windows XP (haven't used it, maybe a previous installation?), and some other windows option that my computer first came with.
Anyways, I know that I only use the first one so is there a way to eliminate the other 3 from the menu? Ideally I would like to not even see the menu when I boot the computer, I'd like it to just go through to windows. I thought I remembered seeing a control panel or some settings for that area somewhere but I can't remember where.
I just install my xp To my System as a primary system os. and id like to install win 98 as a backup os. and is there any possiblity that i can boot my system to xp without going to that os choice menu? and from inside xp (after booting xp) transfer from win98 without rebooting again?
I recently downloaded SP3 and I didn't have SP1a so I had to get installed that first in order to installed SP3 over it. Since then I am experiencing this problem with the above thread i386/kdcom.dll file is corrupted when I try to set up with booting with Windows XP professional CD and I do not have floppy drive to boot it with set up or repair floppies of NT operating system. Actually this problem happened due to ADOBE updates every now and then pops up to install when I do it says failed to install with reason "either your computer is running in Safe mode or windows setup is corrupted and tells me to reset it but it won't let me set it up or boot the disc.
I already have checked the CMOS bios and the prime master is the hard disc and secondary master is the CD ROM. Otherwise my PC is running fine with proper speed Also it won't let me uninstall my older version of ADOBE 9.2 program from AD REMOVE list. Please tell me what to do. The error code it gives me while trying to boot is 4096 also says INF file txtsetup.sif is corrupted.
we have an XP box at work we use for testing custom apps we create...we threw in an extra drive and put Vista on this drive just to test out our apps...after testing, we removed the drive (and hence Vista) leaving just the main drive with XP...our boot options still list Vista as a boot option..i know fixmbr works with XP, but there is another command (can't remember what it is, never used it) for Vista...using XP, can i use the fixmbr command to remove the Vista boot option? if not, how should i remove the second boot option from XP?
I have just got a new PC which came preloaded with XP Home. As I wanted to use XP Pro I nuked what was on there, or so I thought, and installed Pro from scratch. Now when I boot up (as distinct from booting it which I would like to do regularly,) when it starts it gives me a screen asking if I want to boot from XP Pro or XP Home etc. Is there anyway I can get rid of that first screen please?
I have inherited an old compaq s6220wm without HDD from a friend. Whenever I attempt to boot windows XP from a tested and working HDD, I am given the screen with the option for safemode, regularboot, etc. After selecting a boot option, the PC will start the boot process, and then a few seconds reboot, without any error message. Insterestingly, I can boot just fine with the LiveCD into Linux.
I have two HDs installed on my comp. The master (C drive) is running WinXP home edition. The slave (E drive) was taken from my old comp which ran under Win ME (which should still be installed on it). I need to boot up with ME as a "work around" to print some files using a RIP program that is not supported by XP.Is it possible to boot from the slave HD? I looked under the setup options accessed by hitting f12 key during start up, and the "E" drive did not show up on the list of drives. Floppy, Cd drives, and a USB external drive did show up. I also tried looking under a menu accessed by hitting the f2 key...and a second hard drive showed up in that menu, but the options I had available were "off" (the setting I found it set at) or "auto", I changed it to "auto" and tried to reboot but it said "no loader_"
