Pre-loaded - No Recovery/ Boot Disk / SP2 Crashed?
May 20, 2005
I'm trying to fix my mate's PC. It's a Packard Bell with pre-loaded XP Home purchased May 2004. Apparently he got the SP2 update and then the whole thing crashed!Now on starting it is gives the F8 options (safe mode, etc) but choosing any of them results in an endless reboot. He has no Recovery Disks (floppy or CD) - a mistake I know! I'm at a loss and can't even (last resort) re-install from scratch because it was pre-loaded and have no XP CD
View 4 Replies
ADVERTISEMENT
May 5, 2009
Have VAIO VCG RC310G. Windows XP current SP. Tried to load audo disc to Itunes. System crashed. No picture on screen (black). Tried to use F8 safe mode start without success. Have system recovery dvd. Placed in drive. Turned off machine. Turned on. No screen, just black. Hear fan and drive spinning.Checked monitor and see the Analog/Digital message on the screen, (seems to be working.) This is the limit of my knowledge. Any ideas on how to get the recovery disk to be seen by the computer? Help Juscause (I despartely need it). ps, not worried about the data on the computer, but I would like to recovery if possible.
View 4 Replies
View Related
Feb 2, 2010
A while back my computer crashed and I had to do a recovery. Now all of my pictures are gone and my wife is pissed. We did back-up some of the pictures, but were missing almost a year and halfs worth including my son's birthdays and first t-ball games. Is there any way to get them back?
View 7 Replies
View Related
Mar 18, 2005
if this is a simple task , me cumputer crashed yesterday after using the 'Files Needed The file 'usbehci,sys' on {unknown) is needed . Type the path where the file is located,Operating system is xp , i've used the drivers & utility cd that came with the system no joy
View 1 Replies
View Related
Aug 22, 2005
When a software loaded either from a CD or other sources is generally stored on C: disk where the system is located, now, I want to have all the softwares to be loaded stored on other disk , say D: disk. How could I configure?
View 7 Replies
View Related
Mar 5, 2008
I was given an old Dell laptop to try to see if I can fix it. I'm not sure what was done to mess it up, but I thought I'd stick the reinstallation disk in and see what happens. When I put the reinstallation disk into the laptop to reinstall it won't kick in and automatically play. The laptop just sits there. I try to get windows xp to reload using F5, but still nothing. I tried every option under F5 and nothing will load. Its like the computer doesn't have anything in it. How can I just get the reinstallation disk to load?
View 14 Replies
View Related
May 16, 2010
I have a ez5730us hp I can't get to loaded the OS try it start and cut of and reboot the notebook.
View 1 Replies
View Related
Dec 22, 2005
My disk drive crashed I installed a brand new one. I have a certified COA for Windows 2000 Professional but do not have the software. Where can I get a copy of the software?
View 6 Replies
View Related
Jun 2, 2005
I loaded SP 2 for XP home edition on my Dell insperion laptop and the machine slowed down. So much that it takes 24 minutes to boot-up. When I first got the laptop 96months ago)I was prompted to download SP2 I did and had the same problem. Dell walked me through restoring and said I should not install SP2.
View 3 Replies
View Related
Jul 18, 2010
System crashed last night with a Kernel Stack Inpage Error, but restarted fine ... while diagnosing, I tried to get in to Disk Management through Admin Tools/Computer Management, and received the error, "Unable to connect to Logical Disk Manager service". I checked, and the service was disabled (why?), so I set it for manual and restarted it, still received the error.Oddly, I was able to start it from a command prompt, which then allowed it to start from Admin Tools. What just happened here? Is that service normally disabled? If not, what would cause it to become disabled? Could a virus, worm, or rootkit have snuck in?
View 14 Replies
View Related
Sep 23, 2006
Ive recently bought the "Enermax Laureate 3,5" HDD Enclosure Powered (USB 2.0)" and i put in a "Western Digital Caviar SE WD2500JB 250GB (7200rpm/uATA100)".
The problem is that i have a folder in there with the name "software" every time i want to access this file the external disk crashes and i need to turn off the power and turn it on again.The other folders works ok.i have erase and create again the file but nothing happens.i have the same folder with the same files in built-in hard disk and works perfecty.
View 2 Replies
View Related
May 14, 2007
My mothers computer crashed. she gave it to some kid to get the itunes files off of it. the kid deleted all the files on the disk except the user profiles and their documents because Windows Xp write protects them. I need to get those files off of the drive. How do I go about doing this?
View 9 Replies
View Related
Jul 30, 2007
we have a dell w pentium 111/ formerly running windows 2000xp(Copy) The unit appaently crashed due to low disk space. I have a new unused copy of windows 2000 professional. On the pkg it states 'for distrib only w/ a new pc Dell" I attempted to load the disk, I am at a blue screen now that says windows configuring. Its been like that for 35 min. It is not doing anything. What do I do? Have I done something wrong?
View 1 Replies
View Related
Oct 10, 2009
We had an Acer Netbook Aspire One crash a couple of weeks ago. We have tried to restore and a varety of other things.The Netbook DOES NOT have a CD drive nor do we have an external CD drive.We have a 1Gig USB stick, We ended up by having to order 2 discs from Acer - 1 to fix the partition and one to fix Windows.How do we make the stick bootable? Would prefer it in simple terms please.
View 14 Replies
View Related
Jul 28, 2005
I got my master disk crashed and now I have replaced the disk and installed the new WinXP.How can I connect the old crashed master disk back to the bus and installed
as the slave disk.I guess the old disk is not crashed seriously and I am trying to recover some of the data.I have tried to connect the old crashed disk to the slave position and have the jumper setting correct.However, the BIOS does not detect both of them and complains cannot find any OS.
View 13 Replies
View Related
Jan 2, 2005
I have seen this messge twice. Once on a friends PC and just now on mine. My computer has been running for maybe... 3 days straight now. I turned it off for about 3 hours to keep my room cool. I turned it back on an heard "beep...beep...beep...beep" (the same beep you hear if the ram isn't snapped in the socket all the way) and at the boot up it said "Primary slave hard disk fail" XP would not start. So i hit the reset button, same thing, hit it again, same thing. Powered off and powered back on and it started up fine.
View 1 Replies
View Related
Mar 10, 2006
I was on the internet one evening and my mouse stopped working.I then turned off the computor cause thats all it would do after that.When I turned it back on it did nothing but go all the way to the windows xp screen before the sign in page and quit. I was running windows XP SE home edition.On a Sony Vaio.(2003) Do I need a new hard drive and if so what do i do when I replace it as far as partitions and formating?
View 14 Replies
View Related
Dec 1, 2009
Suddenly yesterday my laptop (HP Pavilion zt3019ea, with windows xp on it) stopped working and i got this black screen with "your computer didn't start successfully`" but that was just the beginning of all my problems.First I had to disable the automatic rebooting because the blue screen flashed too quickly.
the error message is "0x00000024 (0x001902FE,0xF8AF7378,0xF8AF7874, 0x82E94805)" which is apparently a problem of corruption in the NTFS file system (i don't really know what it means)
View 4 Replies
View Related
Jan 22, 2009
My SATA hard drive crashed. I was unable to boot to anything but the recovery console from a Win XP setup CD. I couldn't even boot to Safe Mode. I replaced the hard drive and re-installed Windows. This works fine. However, I would like to recover the data on my old HD, which is no longer connected.If I connect the old HD in addition to the new one (using both SATA connections on the motherboard), they are both recognized in BIOS, but I can no longer boot to Windows The system just hangs at a black screen.
View 3 Replies
View Related
Aug 20, 2005
I cannot start up XP. When I do a black screen comes up to try and boot up in other modes,( safe, normal, with previous configuration etc). None works. I went to BIOS message and it states an IDE driver for Fasttrack is missing/ not connected?
View 8 Replies
View Related
Aug 31, 2005
I clicked on the Icon for windows updates on my PC, and after the updates were done, my PC will not boot up.I keep getting one of those blue screens with one of those wonderful error messages.I have tried doing a system restore, several times, but it will not even let me do that
View 11 Replies
View Related
Mar 6, 2008
I want to reformat my hard drive but my computer of 2 years only came with a recovery disc. Do I have to purchase winxp to install the os? i need to purchase recovery disc where n how i proceed?
View 4 Replies
View Related
Jul 26, 2009
All you need is a laptop or a pc with hal.dll error and another laptop or cpu running any other os....ok here we go all you need is a usb or flash drive 256 mb and sometimes mabee smaller.. now download slax 6.1.1 ( small stripped down version of linux capable of booting fully from usb) just extract it to the usb drive and run the bootinst file ( if using vista u need to go to cmd first then type the usb drive (ex.. d: ) then enter then type boot cd enter then bootinst.bat .....once the file opens continue with instructions and your almost there... Now put the usb into the pc or laptop with hal.dll error ..... when boot menu is up type watever it says (like hit the f key for boot order or boot menue or something) when u hit the f key then change boot order to usb hard drive to the 1 slot and save and exit....now onlmost there just start the computer and let slax boot this will take a few minutes and if the letters on the screene stop just wait it out for a couple of minutes.
View 2 Replies
View Related
Mar 19, 2006
i have 2 computers both gateways.one is a e-4200 xp home edition and the other is a 819 gm xp media center. i took the recovery disk from the media center and put it on my e-4200 computer thinking it would speed it up. well i was wrong. and now i want to take it off and i don't no how .i have been working on it for 2 days and i am still at the same spot where i was when i started. does any one no what i can do to resolve this probleam. i do not have the recovery disk for the e-4200 computer to restore it back .
View 4 Replies
View Related
Dec 27, 2004
Purchased a Presario SR1220nx two months ago. It came with a 'System Recovery Disk".(SRD) Is this all I would need incase of a complete software problem to get back in operation again or should I be copying some additional OS files to a CD ? What are the disadvantages of the SRD and the advantages of having the WinXP software ? Seems to me that the SRD is all that I need in case of a failure?
View 2 Replies
View Related
Mar 22, 2005
I've just bought a used laptop running XP Home. It comes with a system recovery disk. Can I use that to do a clean install of the OS so as to remove every trace of the previous owner whose name keeps popping up in folders that can't be deleted or re-named.
View 1 Replies
View Related
Oct 1, 2008
My old laptop died and I now have a brand new, factory sealed Toshiba Satellite Pro, model L300. It came with trial versions of MS Office. I don't want to use the trial version since I have a perfectly good version that I porchased a few years ago. (It's the Teacher and student Edition 2003.) At first I tried installing the 2003 version that I own. It seems to go through the install procedure to the end, but when I try to open OUTLOOK, I get an error that states the MAPI32.DLL" is corrupt.
I spoke with Toshiba but they were not a great help. The told me to go the ADD?Remove and remove the MSOFFICE trial version, which I did. I also removed the 2003 Version
so that I could "start from scratch", so to speak, trying to keep things "graceful".
The same error occurs after installing the 2003 software, and oddly, some of the
2007 software still seems to be there!. Probably residing in the registry somewhere.
View 8 Replies
View Related
Nov 17, 2007
I have a compq computer(SR2034NX) that has crashed. I tried the recovery disks that I had made. But they do not work. When I turn on the computer it goes directly to the recovery page, ask for the disk and says it the wrong one, I know that is it correct, Is their any way I can download the recovery disk again put it on to a zip drive then transfer it to my computer, or can I connect the 2 computers together and transfer it that way, ro can I pick up a disk locally
View 2 Replies
View Related
Sep 23, 2006
It appears the password recovery disk feature only works with a floppy. Has anyone found a way to use a CD or flash drive instead?
View 14 Replies
View Related
Jan 22, 2007
I just bought a laptop off ebay and it has windows xp pro installed. I did not recieve a recovery disk or a windows xp pro disk, but its has a Certificate of Authenticity sticker (the licensed product key associated with the computer). I have a xp pro disk from my install i did on my desktop, can i use my xp pro disk from my desktop and the license from the COA sticker and do a fresh install of windows on the laptop with no problems.
View 7 Replies
View Related
Aug 23, 2005
I have ghost 2003 installed on my pc and want to create a Recovery Disc (Windows XP and installed drivers). The only problem is I have no floppy drive. Could anyone give me step by step details on how to do this. I have tried ghost boot wizard (need a floppy).I have tried Disk to Image and then Image to Disk. I wiped out all that was on the 1st drive (C) and Partition (D) and all that was on the 2nd drive (E). I don't know how it happened but it did. I have now reinstalled Windows and all the drivers but I still want to make a recovery disc.
View 7 Replies
View Related
