I have a Plug and Play Software Enumerator failures. (XP SP2)I get an error 31 which says that it can't load the driver properly. However, the driver files (swenum.sys streamci.dll) are good as I got them from a functioning XP SP2 system. Also, when I enable bootlogging it says that it successfully loads swenum.sys.
However, in Device Manager, I get the exclamation point and error 31.
I have no idea what to do. I went into my cpsystemdevice manager and there's an exclamation point C-Media AC97 Audio Device. I double clicked on it and tried to retrieve it from my winxp cd but it doesn't work.
Just recently, Windows Defender has been displaying an Exclamation Point over it's icon in the system tray. I looked into it and it seems that it wants new definition files.I tried updating the definitions but for some reason it just acts like its trying to update but never does.I'm thinking this may have some thing to do with Windows Genuine Disadvantage.
Running Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
When starting my computer, I get two error messages: AirGCF.exe - entry point not found The procedure entry point apsGetInterface could not be located in dynamic link library wlanapi.dll WZCSLDR2.exe - entry point not found The procedure entry point apsinitialize could not be located in dynamic link library wlanapi.dll
My last comp died on me and I have recently been given a DELL Dimension 3000 (if that helps) and am running Windows XP. I keep getting an error message. I'm all out of ideas and am pulling out what little hair I have left!! The error message reads: 20067620440_mcinfo.exe - Entry Point Not Found The procedure entry freeaddinfo could not be located in the dynamic link library WS2_32.dlll.
I have been using "System Suite 4.0", but see SS 6.0 has been released. Rather than jump to upgrade SSuite, I wonder about the comparative value of "Register Mechanic", "Error Killer" and "PC On Point". Is there a site that routinely reviews and perhaps rates system utilities
i have a exclamation mark in 1394 net adapter.can anyone help me with this.i have tried everything, google for answer, uninstall the driver, restart computer did an action update, still pop up with a Exclamation Mark.tried to load every xp cd, motherboard cd but still cannot manage to update the driver,my os is windows xp professional SP 3..motherboard is ASUS m2n-e sli.
I recently re-installed XP in my old notebook. Although the connections work as ever, including normal internet connection, the Local Area Connection icon in the System Tray now has the "warning" symbol with exclamation point. I can find nothing wrong with the connection behavior, but I'd rather not have the "warning" showing. What can I check or do in order to get rid of it?
I have a Dell 4600 running XP Home and all my USB ports have suddenly stopped working. When I go to the device manager and expand the Universal Serial Bus Controllers, each of the Intel(R) 8280 1EB VBB Universal Host Controller has a yellow exclamation mark beside them. When I check their status this is the message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). I was not in the registry prior to this, so I don't know how it got damaged I tried this: Click Uninstall, and then click Scan for hardware changes to load a usable driver ? no effect.
I tried this: Restart the computer in Safe Mode, and then select Last Known Good Configuration,which rolls back to the most recent successful registry configuration ? didn't fix the problem. Microsoft says that as a last resort, you can edit the registry directly ? but I not sure where and what to edit in the registry. If anyone can tell me what keys to edit in the registry I would very appreciative. I will do anything to avoid reinstall windows from scratch. I unfortuately didn't have system restore going so I cannot use that.
i am trying to delete the temp files in the windows/temp directory but they won't delete. It says a program is using them but even when i try and get rid of them in safe mode they won't delete, how can i get rid of them? Also when i try to run a panda online virus scan i click on the scan my computer icon and it does nothing but there is a little yellow exclamation mark on the bottom left of the window, is that why it isn't doing anything and if so, how can i fix it?
I have two DVD drives connected to an XP desktop computer, however, they do not work. They appear in Device Manager under DVD/CD-ROM drives with a yellow shreik/exclamation mark preceding the listing The devices are also recognized in the BIOS setup. When I click on the device in Device Manager, I get the message"Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)". One of the devices previously worked correctly. In fact, I completed a clean install of XP using it. Just what does the error message mean Does it mean that the devices are faulty & need to be replaced
Every Time that I reboot I get an icon in the system tray, the icon is of a red sphere containing a white exclamation mark. I have run both a virus scan and spyware scan using CA eTrust anitivirus and Windows Defender but with no result shown.
I was just reading an old CNet subscriber letter about using wireless internet in hotels. Lots of people were talking about different ways to prevent your data being stolen, including an "evil twin". Well, a few people mentioned using firewalls. I used to use one a while ago (ZoneAlarm) and liked the way it worked, however, here's my question, how exactly does it protect the data that you SEND.I can understand that it would be protecting your computer from people who try to get onto your own computer, but I thought of it as somewhat like a brick wall, keeping those that you wanted out of your computer on the other side of the brick wall.Do firewalls protect the data that you send also? I was thinking of it being like (another goofy analogy, haha) lining a garden hose with steel tubing, so that way no one can come over and puncture the hose and steal your water from the hole. Can firewalls protect outgoing data, and not just incoming data and protect against incoming threats and attacks on your computer?
Every time I set a restore point then go back to use it it is gone not highlited nor do I have any restore points what so ever none notta.zippo.,.,What to do~??
i'am trying to install oracle apps on my computer.i use winxp sp2, i have 80 gig hard and another one that is 120 gig.i use 97 gig partation to install the apps on it.i use program named mks toolkit that make windows like open source as linux and i use also visual c++ v6 the problem is when i try to install the apps an error occurred and i can't finish the installation the error is Free disk space on system returns zero: probable cause - mount point does not exist.this mean the partiaion is zero gig even it is 97 gig now i want to know how to creat mount point to this partition and the partiation is ntfs.
I don't have a good feeling about this. So yesterday, I went to bed fine, my computer was great. I leave it running usually. I wake up. I can use everything normally, that was opened. I didn't try to run a new .exe file. So I was using Firefox fine, and msn too. Then, I wanted to watch a video with media player classic, and I get an entry point not found error. Notibly I was concerned, but I figured it was just a corrupted file within the realm of the media player, not my computer. So, I decided to try and open up taskmanager. As soon as I do, this is the error I get ".The procedure entry point NdrtypgUnmarshall could not be located in the dynamic link library RPCRT4.dll." Also, something to note, is that if I click okay on the error, it just pops back up, so I can't get rid of it.
My cursor has also returned to the original version, (I'm using cursorXP). I went to system32 to check if I still had the .dll file, or if it had somehow been edited, and nope, it's still there, and it seems untouched. What on earth is going on? How can such a huge error pop up overnight without me doing anything? Also one more thing, some programs that are already open, such as AVG, will not give me an error when I try to run something within them, merely nothing will happen. I can't use my control panel, either.
Right a few week ago my computer crashed and i reinstalled window xp with sp2 with a cd and now the sp2 stop me installing my netgear wirless (WG111v2) adapter diver properly .so i want to uninstall it.i tried going to run (c:windows$NtServicePack Uninstall$spuninstspuninst.exe) it didn't work and because it is a flesh install i don't have a restore point to goback so what can i do?
How do i insert animated gif's into power point,and how can i see the animation i want to write "interview" in the title and i want the "i" to be animated ,i got the animated gif and i dont know how to insert it,and just to make sure how do u download or save an animated gif from the internet
I have a restore point about 3 months ago which I want to keep, but the calender will soon automatically remove it.Is there a way of copying the "old" restore point to a newer date ?
I had a problem: "Remote Function Call" failed. Nothing helped, but restoring a Restore Point.After Restore Point My Documents folder tree also was changed. Folder names were renamed to their old names, and files were moved to their former places.I would like to know what exactly is saved when creating a Restore Point, and what exactly is restored by Restore Point.Why does Restore Point touch My Documents? Does it delete files?
I did a search for files to delete and wonder whether I need to keep all these restore point files. I certainly don't have this many restore points set - would they be required for the couple I do have?
Hello, I currently have a problem with my system restore. It has been this way for as long as I can remember. It just doesn't work. I cannot create a system restore point, it does not allow me, it fails to make one every time I try. There are NO system restore points. I followed this guide http://support.microsoft.com/default...;EN-US;q313853 and my calendar is blank and doesn't show anything. I have tried turning off system restore, restarting and turning it back on....
I?ve had this problem for a long time it started when my HD die on me (RIP) I think it was at the beginning of the year. I turned my slave into the master. I installed xp on it and it was all good. I don?t know when but a problem started, what happened is folders like C: and My documents and other non customize the folder would change to a music folder and I would only be about to sort the folder out my artist e.g. My doc might become a picture folder type and I can sort the folder out by when the picture was taken which is point less. I also found that the more folder type I choose e.g. music folder type that a folder like C: might change to that type.
wzcsldrz.exe entry point not found procedure entry point initialization could not be located in the dynamic link library wlanapi.dll is a common problem after updating to SP3 only fix is update drivers for your wireless card we have run combo fix and Malwarebytes Anti-Malware to resolve other issues.What do i need to do as i do not connect to the internet through my wireless card.I use a netgear dongle?
I have Windows XP Home edition on my desktop with a logitech RX300mouse.My problem is when trying to move the point around the screen the mouse point bounces all over the screen, I therefore can not do any drag and drops.A simple movement across the screen can take me several tries to get to the place I want.
I restored my computer to an earlier point, onlt a few days which was sucsessful but when the desktop came up, it told me that activeshield was missing which is my mcafee virus scan. I uptated off the website and it installed it but my question is,why was it removed in the first place?
