I don't have a good feeling about this. So yesterday, I went to bed fine, my computer was great. I leave it running usually. I wake up. I can use everything normally, that was opened. I didn't try to run a new .exe file. So I was using Firefox fine, and msn too. Then, I wanted to watch a video with media player classic, and I get an entry point not found error. Notibly I was concerned, but I figured it was just a corrupted file within the realm of the media player, not my computer. So, I decided to try and open up taskmanager. As soon as I do, this is the error I get ".The procedure entry point NdrtypgUnmarshall could not be located in the dynamic link library RPCRT4.dll." Also, something to note, is that if I click okay on the error, it just pops back up, so I can't get rid of it.
My cursor has also returned to the original version, (I'm using cursorXP). I went to system32 to check if I still had the .dll file, or if it had somehow been edited, and nope, it's still there, and it seems untouched. What on earth is going on? How can such a huge error pop up overnight without me doing anything? Also one more thing, some programs that are already open, such as AVG, will not give me an error when I try to run something within them, merely nothing will happen. I can't use my control panel, either.
wzcsldrz.exe entry point not found procedure entry point initialization could not be located in the dynamic link library wlanapi.dll is a common problem after updating to SP3 only fix is update drivers for your wireless card we have run combo fix and Malwarebytes Anti-Malware to resolve other issues.What do i need to do as i do not connect to the internet through my wireless card.I use a netgear dongle?
When starting my computer, I get two error messages: AirGCF.exe - entry point not found The procedure entry point apsGetInterface could not be located in dynamic link library wlanapi.dll WZCSLDR2.exe - entry point not found The procedure entry point apsinitialize could not be located in dynamic link library wlanapi.dll
I recently updated to SP3 then I started getting a pop up saying, "The procedure entry point apsInitialize could not be located in the dynamic link library wlanapi.dll" everytime i turn on the computer. How do I fix it?
My last comp died on me and I have recently been given a DELL Dimension 3000 (if that helps) and am running Windows XP. I keep getting an error message. I'm all out of ideas and am pulling out what little hair I have left!! The error message reads: 20067620440_mcinfo.exe - Entry Point Not Found The procedure entry freeaddinfo could not be located in the dynamic link library WS2_32.dlll.
When i boot my desktop xp home... Get message box stating...rundll32.exe-entry point not found' inside box says '....msvcrt.dll... Not found in library...' i click ok, then new box says...' error loading p17rune.dll ' i click ok and all is well. I have downloaded drivers from nvidia.com
Can somebody plz help my friends laptop does not load up after the windows xp loading screen it goes to a blue screen saying:Stop:c0000139 {entry point not found}.The procedure entry point I_rpcexceptionfilter could not be located in the dynamic link library RPCRT4.dll.there is no cd recovery or no partional drive on here to do a system recovery. as i know anyway as i have looked.
I have a printer/copier/fax/scanner which was working perfectly. It is a Lexmark X1270. My Computer is a HP Multimedia with a windows XP operating system. Suddenly one day it stopped working. the following error message appeared error message: the procedure entry point? GetProductPrefix@LXkProduct@@SA?AVCString@@XZ could not be located in dynamic link library lxczutil.dll. when trying to use the copy function. For the printer function it would sometimes print ONE item. Then to print anything else I have to restart the computer and again it would print only one copy. Unfortunately the original cd with the drivers has been lost so I emailed the lexmark. They asked me to download the driver for X2500. I tried but it did not work as the model number seems different. I sent them 3 reminders for further help which they did not reply! And now again suddenly a few days ago the printer does not even load. Message says 'Spooler service is not running'. And even the other printers are unusable because the fax printer box is empty and I cannot reload a printer ..the same 'Spooler....appears.
Using Windows XP pro SP2 and need some help. I have a program which I like called T-Clock2 you can get a copy here: http://shii.org/tclock/ my problem is when I originally installed it I foolishly installed it from an UNZIPPED location.I want to try to correct that & do not know how to do it, so I hope someone can help, there is NO UNINSTALLER for the product and it does NOT show up in ADD/REMOVE programs & when I go to MSCONFIG & click on the startup tab, it shows location of c:unzipped clock2. I can unclick that then on reboot the program does not startI want to move the EXE file/folder to a real location (Like c:Tclock2), HOW do I change the startup entry in MSCONFIG not to point to UNZIPPED & point to the new C:TCLOCK2 location?
I was attempting a repair install of 2000 pro. After the standard installation reboot i got error message: 0000263 driver entry point not found fltmgr. sys driver could not locate entry piont IogetDeviceAttachmentBaseRef in ntoskrnl.exe.
my laptop keeps turning itself off. I run Panda AV Software. On restarting I get these messages :program files/panda software/panda titanium antivirus 2005/ firewarll/travlog log entry is not valid local settings/temp/Dfd70e.tmp log entry is not valid. entry truncated local settings/temp/Dfd71D.tmp log entry is not valid. entry truncated
I recently installed a demo of Namo WebEditor 2006. I customised its position in the start menu . ie. moved it. I did not like the program and uninstalled it. The problem is that the entry still appears in the start menu (It is located in the All users directory/start menu. I cannot dlete/move or change it in any way. I have tried the following.1. Dos mode - cannot see it.2. Safe mode (all types) cannot see it.3. Trying from another OS. cannot operate on it.4. Regedit - the entry is not there on a search
If I go into my registry and manually delete the entry, but as soon as I do, it automatically respawns itself. Spybot removes it but it comes back. If anyone has had this problem and has fixed it, please let me know of what you did to fix it. I emailed Spybot with a copy of a scan and its information and they told me they were coming out with a new update that would probably fix this and that was over 2 months ago and none of the updates has fixed it.
I have a file (.reg extension) that I would like to add to my registry. When I double click on the file when I am using one of my PC's (both are using XP) the message pops up and asks if I would like to add the entry to my registry and I simply click yes. On my other XP machine, I double click on it and the file opens up in word pad. Any way to not have word pad open the file and get the dialog box to ask whether or not to enter it into the registry?
Ok, I'm losing my patience with my dial-up connection. I signed up with a new provider and I am getting this message under the Network and Dial-Up Connections window.
Error 623: The System Could Not Find the Phonebook Entry for this Connection
I can connect to the internet via dial-up but it periodically drops my connection and I get the above error message. I am still able to connect to my old dial-up provider and I don't get this error or get dropped. I'm skepitcal that it's the way I initially set up the new connection with the new provider. I found this link (http://support.microsoft.com/kb/227391/) to microsoft'ss website addressing the issue but it does no help me.
It says to do the following;
1.Click Start, point to Settings, and then click Network and Dial-up Connections. 2.Right-click the Virtual Private Connection in question, and then click Properties. 3.Select the "Dial another connection first" check box, and then select the appropriate Dial-up connection from the drop-down list box. If there is no Dial-up connection to choose from in this location, you may have to create a Dial-up connection and then repeat these steps.
BUT there is no option to "Dial another connection first" check box. It just doesn't exist
I have an IBM Thinkpad Z51 that I got through school.It has worked fine until now but now whenever I boot the laptop,it freezes at the password entry screen. I can boot in safemode no problem, but as soon as I enter the first letter of my password in normal mode, the computer freezes. Sometimes, after pressing F8 and using the last known good configurations like 8 times I can finally enter my password
How do I remove Quick Time Media Player from my PC, which was downloaded some time back. In control panel their is separate entry for quick time which cannot be deleted. tried to remove it by deleting all the entry pertaining to quick time from registry, but it simply refuses to go.
it found the virus on the F hdd which u guys know its not the main one ...it was(virus) found on a folder i can't even see i have the "show hidden folders" on so why can't i see those folders ? i am more worried about that than the virus since my software found it im okay with it lol but i just reinstalled my os and i get a virus found on a folder i didn't know xcisted wtfuge ! ! and i have folder that are just named kinda like this "5e56dc46768be0474974c759ab4690" on some hdd any ideas? oh and i can't erase them why?
Out of nowhere in the C drive come these folders. They are named FOUND.000 on up through FOUND.025. Inside the folders are various numbers of files that are named in this way FILE0000.CHK, FILE0001.CHK, FILE0002.CHK. what are they and what should I do?
a message keeps popping up saying the following: Cannot load dialog. Error 623: The system could not find the phone book entry for this connection. All I can do is click the close button and it goes away and nothing else seems to happen, but it pops up again in a few minutes.
I was doing a clean up with Ccleaner etc and in my haste I did not take note of what I was clicking. Spybot Search and Destroy flashed up and I clicked to allow, or not allow as the case may be, to do something to, from what I can remember, 'WLON' or something similarly named. In any case, what happens now is that I fire up the computer, enter my password, the desktop briefly flashes up for a split second(no icons) and then it immediately logs off and goes to password entry again.
I was just reading an old CNet subscriber letter about using wireless internet in hotels. Lots of people were talking about different ways to prevent your data being stolen, including an "evil twin". Well, a few people mentioned using firewalls. I used to use one a while ago (ZoneAlarm) and liked the way it worked, however, here's my question, how exactly does it protect the data that you SEND.I can understand that it would be protecting your computer from people who try to get onto your own computer, but I thought of it as somewhat like a brick wall, keeping those that you wanted out of your computer on the other side of the brick wall.Do firewalls protect the data that you send also? I was thinking of it being like (another goofy analogy, haha) lining a garden hose with steel tubing, so that way no one can come over and puncture the hose and steal your water from the hole. Can firewalls protect outgoing data, and not just incoming data and protect against incoming threats and attacks on your computer?
Every time I set a restore point then go back to use it it is gone not highlited nor do I have any restore points what so ever none notta.zippo.,.,What to do~??
i'am trying to install oracle apps on my computer.i use winxp sp2, i have 80 gig hard and another one that is 120 gig.i use 97 gig partation to install the apps on it.i use program named mks toolkit that make windows like open source as linux and i use also visual c++ v6 the problem is when i try to install the apps an error occurred and i can't finish the installation the error is Free disk space on system returns zero: probable cause - mount point does not exist.this mean the partiaion is zero gig even it is 97 gig now i want to know how to creat mount point to this partition and the partiation is ntfs.
I have a Plug and Play Software Enumerator failures. (XP SP2)I get an error 31 which says that it can't load the driver properly. However, the driver files (swenum.sys streamci.dll) are good as I got them from a functioning XP SP2 system. Also, when I enable bootlogging it says that it successfully loads swenum.sys. However, in Device Manager, I get the exclamation point and error 31.
Right a few week ago my computer crashed and i reinstalled window xp with sp2 with a cd and now the sp2 stop me installing my netgear wirless (WG111v2) adapter diver properly .so i want to uninstall it.i tried going to run (c:windows$NtServicePack Uninstall$spuninstspuninst.exe) it didn't work and because it is a flesh install i don't have a restore point to goback so what can i do?
How do i insert animated gif's into power point,and how can i see the animation i want to write "interview" in the title and i want the "i" to be animated ,i got the animated gif and i dont know how to insert it,and just to make sure how do u download or save an animated gif from the internet
