my laptop keeps turning itself off. I run Panda AV Software. On restarting I get these messages :program files/panda software/panda titanium antivirus 2005/ firewarll/travlog log entry is not valid local settings/temp/Dfd70e.tmp log entry is not valid. entry truncated local settings/temp/Dfd71D.tmp log entry is not valid. entry truncated
View 1 RepliesI have a wierd start-up entry that is essentially blank, with a check
box enabled.
I don't have a good feeling about this. So yesterday, I went to bed fine, my computer was great. I leave it running usually. I wake up. I can use everything normally, that was opened. I didn't try to run a new .exe file. So I was using Firefox fine, and msn too. Then, I wanted to watch a video with media player classic, and I get an entry point not found error. Notibly I was concerned, but I figured it was just a corrupted file within the realm of the media player, not my computer. So, I decided to try and open up taskmanager. As soon as I do, this is the error I get ".The procedure entry point NdrtypgUnmarshall could not be located in the dynamic link library RPCRT4.dll." Also, something to note, is that if I click okay on the error, it just pops back up, so I can't get rid of it.
My cursor has also returned to the original version, (I'm using cursorXP). I went to system32 to check if I still had the .dll file, or if it had somehow been edited, and nope, it's still there, and it seems untouched. What on earth is going on? How can such a huge error pop up overnight without me doing anything? Also one more thing, some programs that are already open, such as AVG, will not give me an error when I try to run something within them, merely nothing will happen. I can't use my control panel, either.
I recently installed a demo of Namo WebEditor 2006. I customised its position in the start menu . ie. moved it. I did not like the program and uninstalled it. The problem is that the entry still appears in the start menu (It is located in the All users directory/start menu. I cannot dlete/move or change it in any way. I have tried the following.1. Dos mode - cannot see it.2. Safe mode (all types) cannot see it.3. Trying from another OS. cannot operate on it.4. Regedit - the entry is not there on a search
View 2 Replies View RelatedWhen I run Spybot 1.4, I get this ISearchTech.PowerScan registry entry problem. I saved the log information and it is as follows:
ISearchTech.PowerScan: Settings (Registry value, nothing done)
HKEY_LOCAL_MACHINESOFTWAREMicrosoftInternet ExplorerMainBandRest
If I go into my registry and manually delete the entry, but as soon as I do, it automatically respawns itself. Spybot removes it but it comes back. If anyone has had this problem and has fixed it, please let me know of what you did to fix it. I emailed Spybot with a copy of a scan and its information and they told me they were coming out with a new update that would probably fix this and that was over 2 months ago and none of the updates has fixed it.
Running MXP SP2 I would like to correct stack overflow, if required.What is the rule of thumb for making an entry.
View 7 Replies View Relatedwzcsldrz.exe entry point not found procedure entry point initialization could not be located in the dynamic link library wlanapi.dll is a common problem after updating to SP3 only fix is update drivers for your wireless card we have run combo fix and Malwarebytes Anti-Malware to resolve other issues.What do i need to do as i do not connect to the internet through my wireless card.I use a netgear dongle?
View 14 Replies View RelatedI have a file (.reg extension) that I would like to add to my registry. When I double click on the file when I am using one of my PC's (both are using XP) the message pops up and asks if I would like to add the entry to my registry and I simply click yes. On my other XP machine, I double click on it and the file opens up in word pad. Any way to not have word pad open the file and get the dialog box to ask whether or not to enter it into the registry?
View 7 Replies View RelatedWhen starting my computer, I get two error messages: AirGCF.exe - entry point not found The procedure entry point apsGetInterface could not be located in dynamic link library wlanapi.dll WZCSLDR2.exe - entry point not found The procedure entry point apsinitialize could not be located in dynamic link library wlanapi.dll
View 5 Replies View RelatedOk, I'm losing my patience with my dial-up connection. I signed up with a new provider and I am getting this message under the Network and Dial-Up Connections window.
Error 623: The System Could Not Find the Phonebook Entry for this Connection
I can connect to the internet via dial-up but it periodically drops my connection and I get the above error message. I am still able to connect to my old dial-up provider and I don't get this error or get dropped. I'm skepitcal that it's the way I initially set up the new connection with the new provider. I found this link (http://support.microsoft.com/kb/227391/) to microsoft'ss website addressing the issue but it does no help me.
It says to do the following;
1.Click Start, point to Settings, and then click Network and Dial-up Connections.
2.Right-click the Virtual Private Connection in question, and then click Properties.
3.Select the "Dial another connection first" check box, and then select the appropriate Dial-up connection from the drop-down list box. If there is no Dial-up connection to choose from in this location, you may have to create a Dial-up connection and then repeat these steps.
BUT there is no option to "Dial another connection first" check box. It just doesn't exist
I have an IBM Thinkpad Z51 that I got through school.It has worked fine until now but now whenever I boot the laptop,it freezes at the password entry screen. I can boot in safemode no problem, but as soon as I enter the first letter of my password in normal mode, the computer freezes. Sometimes, after pressing F8 and using the last known good configurations like 8 times I can finally enter my password
View 2 Replies View RelatedI recently updated to SP3 then I started getting a pop up saying, "The procedure entry point apsInitialize could not be located in the dynamic link library wlanapi.dll" everytime i turn on the computer. How do I fix it?
View 13 Replies View RelatedMy last comp died on me and I have recently been given a DELL Dimension 3000 (if that helps) and am running Windows XP. I keep getting an error message. I'm all out of ideas and am pulling out what little hair I have left!!
The error message reads:
20067620440_mcinfo.exe - Entry Point Not Found
The procedure entry freeaddinfo could not be located in the dynamic link library WS2_32.dlll.
When i boot my desktop xp home... Get message box stating...rundll32.exe-entry point not found' inside box says '....msvcrt.dll... Not found in library...' i click ok, then new box says...' error loading p17rune.dll ' i click ok and all is well. I have downloaded drivers from nvidia.com
View 3 Replies View RelatedI have a printer/copier/fax/scanner which was working perfectly. It is a Lexmark X1270. My Computer is a HP Multimedia with a windows XP operating system. Suddenly one day it stopped working. the following error message appeared error message: the procedure entry point? GetProductPrefix@LXkProduct@@SA?AVCString@@XZ could not be located in dynamic link library lxczutil.dll. when trying to use the copy function. For the printer function it would sometimes print ONE item. Then to print anything else I have to restart the computer and again it would print only one copy. Unfortunately the original cd with the drivers has been lost so I emailed the lexmark. They asked me to download the driver for X2500. I tried but it did not work as the model number seems different. I sent them 3 reminders for further help which they did not reply! And now again suddenly a few days ago the printer does not even load. Message says 'Spooler service is not running'. And even the other printers are unusable because the fax printer box is empty and I cannot reload a printer ..the same 'Spooler....appears.
View 4 Replies View RelatedCan somebody plz help my friends laptop does not load up after the windows xp loading screen it goes to a blue screen saying:Stop:c0000139 {entry point not found}.The procedure entry point I_rpcexceptionfilter could not be located in the dynamic link library RPCRT4.dll.there is no cd recovery or no partional drive on here to do a system recovery. as i know anyway as i have looked.
View 2 Replies View RelatedUsing Windows XP pro SP2 and need some help. I have a program which I like called T-Clock2 you can get a copy here: http://shii.org/tclock/ my problem is when I originally installed it I foolishly installed it from an UNZIPPED location.I want to try to correct that & do not know how to do it, so I hope someone can help, there is NO UNINSTALLER for the product and it does NOT show up in ADD/REMOVE programs & when I go to MSCONFIG & click on the startup tab, it shows location of c:unzipped clock2. I can unclick that then on reboot the program does not startI want to move the EXE file/folder to a real location (Like c:Tclock2), HOW do I change the startup entry in MSCONFIG not to point to UNZIPPED & point to the new C:TCLOCK2 location?
View 2 Replies View RelatedHow do I remove Quick Time Media Player from my PC, which was downloaded some time back. In control panel their is separate entry for quick time which cannot be deleted. tried to remove it by deleting all the entry pertaining to quick time from registry, but it simply refuses to go.
I was attempting a repair install of 2000 pro. After the standard installation reboot i got error message: 0000263 driver entry point not found fltmgr. sys driver could not locate entry piont IogetDeviceAttachmentBaseRef in ntoskrnl.exe.
View 13 Replies View Relateda message keeps popping up saying the following: Cannot load dialog. Error 623: The system could not find the phone book entry for this connection. All I can do is click the close button and it goes away and nothing else seems to happen, but it pops up again in a few minutes.
View 1 Replies View RelatedI was doing a clean up with Ccleaner etc and in my haste I did not take note of what I was clicking. Spybot Search and Destroy flashed up and I clicked to allow, or not allow as the case may be, to do something to, from what I can remember, 'WLON' or something similarly named. In any case, what happens now is that I fire up the computer, enter my password, the desktop briefly flashes up for a split second(no icons) and then it immediately logs off and goes to password entry again.
View 4 Replies View RelatedI recently went to System Configuration>Boot.ini and found a line entry C:CMDCONSBOOTSECT DAT="Microsoft Windows Recovery Console"/cmdcons When I click on Check All Boot Paths, a pop up appears saying..." it appears that the following line in the Boot.ini file does not refer to a valid operating system." C:CMDCONSBOOTSECT DAT="Microsoft Windows Recovery Console"/cmdcons Do you want to remove it? Yes No , what this line is for and is it needed in Win XP home edition which does not have the windows recovery console?
View 2 Replies View RelatedIn recent weeks the computer screen keeps freezing with the cursor being replaced by the hour glass symbol. This usually happens after several hours computer usage - but sometimes it occurs soon after the computer is turned on.When this happens, I am unable to log off; the computer on/off button does not work when the screen freezes and I have to turn the computer off at the mains.In order to be able to log back into my broadband internet connection I have to turn the computer and and off twice and then on again Sometimes when the computer screen image freezes a message box appears always saying "End programme" (i.e. "End programme - CiceroUIWndFrame" or "End programme - mixer").
View 1 Replies View Relatedrunning xp on it. was having problems before so restored to factory settings doing a hard disk format in the process. problem still occuring.could it be ram/overheating?
View 4 Replies View Relatedi seem to be having a problem with my second computer. it keeps turning off and on. it beeps when ever it turns on.i have no idea what the problem is.i was trying to reformat the drive but it would not stay on long enough to read the cd.so i was thinking it might be the harddrive. so i put another harddrive in it that i know is working fine. it does stay on but i get first the safe mode screen. it does not matter what option i pick like start windows normally or start in safe mode after i hit enter i get a blue screen telling me windows has shut down to protect my system from a fatal error. it tells me to check my harddrive for viruses or errors. my problem is i don't know how to get past that blue screen to check my harddrive. i have to turn the computer off. it happens every time i turn it on.i would give you a log report but i can't make one.
View 14 Replies View RelatedI've been having really bad computer troubles recently and really need some help, cause I've wracked my brain trying to think of possible solutions here.To give a bit of background:The computer in question is an AMD Athlon 1800+ that I've had for about 3 years now. It's not the most stellar computer, but I mainly use it to surf the web and play some low-end games nothing spectacular.Recently however it had started to reboot constantly, and eventually just power off and never come back on. I figured it was the power supply, so I purchased a new 400W one, installed it and everything was working great.Fast-forward a couple weeks later, and I started to hear a really odd noise coming from the computer. It sounded almost as if sparks were flying around inside, but I removed the case and checked what the problem was, and it seemed the CPU cooling fan was having some troubles, and eventually stopped working. So just today I went out and bought a new CPU cooling fan, installed it, and again, everything was working fine.
However, just tonight, the computer began to reboot randomly again, and now it is at the point where it will not turn on, and when I do power it on, it just idles and beeps constantly. They are fairly short beeps, but they continue on and on indefinitely. I read up on the beep codes and how they coordinate with the BIOS setting, but problem is I have no idea which BIOS setting I have, so I am not sure what could be the problem. To be safe, I began to unplug the cards one by one, seeing if any of them stopped the beeping, but to no avail.So I am at a total loss here Having just bought those two things recently and STILL having the computer act like a pile of garbage is disheartening to say the least, and I just hope someone may have an idea on what or how I could fix this.
My PC is around 6 years old, maybe older, and for the last couple of months, mostly during the night (which to be honest scares the hell out of me), it will turn on randomly. Sometimes it's when I move the mouse, which I know had something to do with a setting in the BIOS, but sometimes it's for no reason at all. It just...boots. Sometimes straight after I turn it back off. I've had to unplug it at night.I always shut it down properly - no standby or hibernation.
View 3 Replies View Relatedhere's the deal my vista kept getting blue screens so I reinstalled it. I was unhappy with it and tried to install XP. The computer keeps turning off on install while its loading files. I've formatted several times to try and get this working so now I don't even have an os to get on the computer with. I'm running an acer aspire 5100. I tried to get back on by installing vista again but the expanding files part of the install stops at 90% and I get an error. Repairs from both xp and vista install discs don't do anything.
View 9 Replies View RelatedI friend of mine bought a new HP 6210 all-in-one. When I went to install the software for it I got this error message "%1 is not a valid Win32 application". I have researched this error and as far as I can figure it applies only to windows 2000 server and pro. He is running XP Pro. any suggestions on a fix to get this all-in-one working?
View 8 Replies View RelatedI use my computer 2 to 3 times a day. Is it best to turn it off each time, or leave it on until the end of the day?
View 14 Replies View RelatedI don't understand why, but my computer is turning itself on! Just now - 6:08 PM, PST it turned itself on. Could it be someone controlling the computer remotely? Could it have to do with "Hibernate?" Usually I use "Hibernate" to turn off the computer.
View 6 Replies View Related