Driver Entry Point Founding Issue After Installing 2000 Pro
Sep 12, 2008
I was attempting a repair install of 2000 pro. After the standard installation reboot i got error message: 0000263 driver entry point not found fltmgr. sys driver could not locate entry piont IogetDeviceAttachmentBaseRef in ntoskrnl.exe.
I don't have a good feeling about this. So yesterday, I went to bed fine, my computer was great. I leave it running usually. I wake up. I can use everything normally, that was opened. I didn't try to run a new .exe file. So I was using Firefox fine, and msn too. Then, I wanted to watch a video with media player classic, and I get an entry point not found error. Notibly I was concerned, but I figured it was just a corrupted file within the realm of the media player, not my computer. So, I decided to try and open up taskmanager. As soon as I do, this is the error I get ".The procedure entry point NdrtypgUnmarshall could not be located in the dynamic link library RPCRT4.dll." Also, something to note, is that if I click okay on the error, it just pops back up, so I can't get rid of it.
My cursor has also returned to the original version, (I'm using cursorXP). I went to system32 to check if I still had the .dll file, or if it had somehow been edited, and nope, it's still there, and it seems untouched. What on earth is going on? How can such a huge error pop up overnight without me doing anything? Also one more thing, some programs that are already open, such as AVG, will not give me an error when I try to run something within them, merely nothing will happen. I can't use my control panel, either.
wzcsldrz.exe entry point not found procedure entry point initialization could not be located in the dynamic link library wlanapi.dll is a common problem after updating to SP3 only fix is update drivers for your wireless card we have run combo fix and Malwarebytes Anti-Malware to resolve other issues.What do i need to do as i do not connect to the internet through my wireless card.I use a netgear dongle?
When starting my computer, I get two error messages: AirGCF.exe - entry point not found The procedure entry point apsGetInterface could not be located in dynamic link library wlanapi.dll WZCSLDR2.exe - entry point not found The procedure entry point apsinitialize could not be located in dynamic link library wlanapi.dll
I recently updated to SP3 then I started getting a pop up saying, "The procedure entry point apsInitialize could not be located in the dynamic link library wlanapi.dll" everytime i turn on the computer. How do I fix it?
My last comp died on me and I have recently been given a DELL Dimension 3000 (if that helps) and am running Windows XP. I keep getting an error message. I'm all out of ideas and am pulling out what little hair I have left!! The error message reads: 20067620440_mcinfo.exe - Entry Point Not Found The procedure entry freeaddinfo could not be located in the dynamic link library WS2_32.dlll.
When i boot my desktop xp home... Get message box stating...rundll32.exe-entry point not found' inside box says '....msvcrt.dll... Not found in library...' i click ok, then new box says...' error loading p17rune.dll ' i click ok and all is well. I have downloaded drivers from nvidia.com
I have a printer/copier/fax/scanner which was working perfectly. It is a Lexmark X1270. My Computer is a HP Multimedia with a windows XP operating system. Suddenly one day it stopped working. the following error message appeared error message: the procedure entry point? GetProductPrefix@LXkProduct@@SA?AVCString@@XZ could not be located in dynamic link library lxczutil.dll. when trying to use the copy function. For the printer function it would sometimes print ONE item. Then to print anything else I have to restart the computer and again it would print only one copy. Unfortunately the original cd with the drivers has been lost so I emailed the lexmark. They asked me to download the driver for X2500. I tried but it did not work as the model number seems different. I sent them 3 reminders for further help which they did not reply! And now again suddenly a few days ago the printer does not even load. Message says 'Spooler service is not running'. And even the other printers are unusable because the fax printer box is empty and I cannot reload a printer ..the same 'Spooler....appears.
Can somebody plz help my friends laptop does not load up after the windows xp loading screen it goes to a blue screen saying:Stop:c0000139 {entry point not found}.The procedure entry point I_rpcexceptionfilter could not be located in the dynamic link library RPCRT4.dll.there is no cd recovery or no partional drive on here to do a system recovery. as i know anyway as i have looked.
Using Windows XP pro SP2 and need some help. I have a program which I like called T-Clock2 you can get a copy here: http://shii.org/tclock/ my problem is when I originally installed it I foolishly installed it from an UNZIPPED location.I want to try to correct that & do not know how to do it, so I hope someone can help, there is NO UNINSTALLER for the product and it does NOT show up in ADD/REMOVE programs & when I go to MSCONFIG & click on the startup tab, it shows location of c:unzipped clock2. I can unclick that then on reboot the program does not startI want to move the EXE file/folder to a real location (Like c:Tclock2), HOW do I change the startup entry in MSCONFIG not to point to UNZIPPED & point to the new C:TCLOCK2 location?
my laptop keeps turning itself off. I run Panda AV Software. On restarting I get these messages :program files/panda software/panda titanium antivirus 2005/ firewarll/travlog log entry is not valid local settings/temp/Dfd70e.tmp log entry is not valid. entry truncated local settings/temp/Dfd71D.tmp log entry is not valid. entry truncated
I have a Sony Vaio laptop that came with XP and due to unfortunate circumstances it now has 2000. The problem is everytime I go to the Sony website for drivers they are for xp and won't work. I need the dvd drivers and the sound drivers. I was wondering if someone had some advice for me?
I have a computer that is a few years old. I installed XP Professional on it, and now it runs really slow. I have an old copy of Windows 2000 that I would like to install on my computer instead. Does anyone know how to do that? When I put in my Win 2000 CD, it tells me that I already have a higher version of windows on my system and doesn't let me do anything else.
I'm an intermediate user just beginning to study for MS sys admin.Both my laptops run XP home, but I have 2000 Pro from when I had a desktop...which I unfortunately gave to a family member. I'd like to install this on one of my laptops because the Pro capabilities will allow me to "study" a little better than just home XP. At any rate, I'd like the experience of configuring everything. will I lose everything in XP if I set up a partition to install 2000 Pro? Is it even possible to install both of them without installing 2000 first? The XP came pre-loaded on my computer but I do have a disk.
I have a pentium III Dell spare computer siting on a shelf downstairs with win pro 2000 installed on it. Is it a hard thing to uninstall that operating system and reinstall the windows xp home from my main home Dell computer?
I have just installed a fresh copy of XP Pro and am now attempting to install Office 2000 Midway through the installation a window entitled "windows file protection" pops up which reads: "Windows files must be installed for your installation to proceed. Insert your Windows XP Professional Service Pack 2 CD now." The buttons available to press are retry, more information and cancel. When i insert the cd i used to install XP Pro it tells me i've inserted the wrong CD- the same message comes up when i press "retry"After clicking cancel to exit setup, i get the message entitled "installer information"- "Error 1933- The windows installer service cannot update one or more protected Windows files"
Since my PC is 64, I plan to install only the 64. But is there also some reason to install the 32? Also what about the RAID drivers? I am totally new to 64/RAID. The extent of my knowledge is the ability to say them!
I am trying to install the USB ports on a 2Ghz Celereon system running Windows XP SP2. When Windows starts, it recognizes that the USB ports have been turned on, and then it identifies the make and model of the USB port, but then the system locks. When I go into BIOS and turn off USB, the system runs just fine. What is causing the machine to lock when I turn the USB ports on?
I recently purchased a Gateway MT6452. It came with Vista. After I ran out of patience I installed windows XP. I am having a problem installing the sound card driver. It is identified as sigmatel 9250. I think I have tried every driver on the net and nothing seems to work.
I have just installed a nvidia driver (84.21) to replace the version (77.77) I've successfully been running for several months now. Both are certified as compat with my 6800gt card. I seem to be able to instal it OK, files are copied across, the screen resets, the new driver is listed as installed uder the device manager and I get a message saying the new hardware has succesfully installed and I need to restart to finish installation.
When I do, i go through the usual boot through to the windows start up screen (with flag), then I get a blue secreen with "please wait....." after 5 secs the dots stop appearing, then within 30 secs the HD stops. The keyboard etc is frozen. I gave it 5 mins then reverted to last good config, and tried again deleting all previous nvidia drivers, but still get the same result. I also tried a different driver (83. something) and still the same. I had norton disabled during installation
here is the problem: when I plug in an USB device, windows will install the driver for the device automaticlly if: 1. the driver comes with the system.
2. the device driver has been installed.
I wanna stop windows installing driver automatically but ask me the location of the driver when I plug in a device every time. How do I do that?
PC with Windows XP Professional Edition 2002 SP2 has no sound.I tried installing Sound Blaster,but this is the error I got: That is the error message I get when I try to Install Setup.exe,which I need to use to install Sound Blaster.My PC won't let me install Sound Blaster without setup.exe it says the setup.exe I have doesn't work, which can't be installed without installing IIS.
Attempt to reinstall windows i have 2 striped drives, i need to reinstall my raid drivers but every time i try to install the drivers it always says that it can't read it, i finally got it to read but then it says this file caused an unexpected error and the installation fails and i'm back at my original installation of windows.
I am having a problem with my printer after installing network magic. Everytime I send a document from the main pc to the printer connected directly to it, I get a stop screen and a reboot. When it comes back I do the Microsoft error report and it says there is a problem with a driver.
I am in the process of installing drivers onto my computer. I just reinstalled XP Home Edition on my Dell Inspiron e1505/6400. So far I have installed the following drivers: and (I think) Modem...I'm not sure if the last one worked or not.Now I'm trying to install the video driver and it won't work, This is the error window that pops up.One or more files required for installation are either missing or corrupt.Setup will exit.
I have this pentium 3 - 700 mhz computer which today I formatted and installed windows xp pro on it. The motherboard on the computer comes with a SIS 5598/6326 display adapter for which I been searching the internet for its WIN XP driver but havent found any except for the other versions of windows are available.What can I do if there is no WIN XP version of this driver?
I'm in a bit of a pickle, I was installing some beta drivers from nvidia on my gaming desktop just for fun, but when I restarted the computer can't run for more then 3 minutes until it crashes, so I need to go back and reverse the drivers i installed or get rid of them. The dilemma here is that I'm not exactly sure what I need to do, nor can I BOOT INTO SAFE MODE, which has been an issue for me for about a year now. Whenever I begin to login in safe mode the computer abruptly restarts before it even reaches the desktop
i have 2 western digital 80gb on raid0. on this array i have installed windows 7 and now i want to install windows xp on another partition.the problem is that windows xp setup won't recognize my array even with the original raid driver floppy-disk. i created even an nLite customized xp with those drivers installed and it doesn't work.
I recently installed a demo of Namo WebEditor 2006. I customised its position in the start menu . ie. moved it. I did not like the program and uninstalled it. The problem is that the entry still appears in the start menu (It is located in the All users directory/start menu. I cannot dlete/move or change it in any way. I have tried the following.1. Dos mode - cannot see it.2. Safe mode (all types) cannot see it.3. Trying from another OS. cannot operate on it.4. Regedit - the entry is not there on a search
If I go into my registry and manually delete the entry, but as soon as I do, it automatically respawns itself. Spybot removes it but it comes back. If anyone has had this problem and has fixed it, please let me know of what you did to fix it. I emailed Spybot with a copy of a scan and its information and they told me they were coming out with a new update that would probably fix this and that was over 2 months ago and none of the updates has fixed it.