I have a pentium III Dell spare computer siting on a shelf downstairs with win pro 2000 installed on it. Is it a hard thing to uninstall that operating system and reinstall the windows xp home from my main home Dell computer?
I'm an intermediate user just beginning to study for MS sys admin.Both my laptops run XP home, but I have 2000 Pro from when I had a desktop...which I unfortunately gave to a family member. I'd like to install this on one of my laptops because the Pro capabilities will allow me to "study" a little better than just home XP. At any rate, I'd like the experience of configuring everything. will I lose everything in XP if I set up a partition to install 2000 Pro? Is it even possible to install both of them without installing 2000 first? The XP came pre-loaded on my computer but I do have a disk.
I had the trial and I want to install the full, it's installed and it won't run.ANy ideas? I have heard there is a special way you need to uninstall but idk?
First of all, thanks for what looks like a great forum, and thanks for looking at my problem here. I installed an AOpen DVD RW in my Dell Dimension 3000 last night, and I also installed the included Nero 7 software. I tried to watch a DVD that was done in Dolby surround and I had no audio. Nero Prompted me that I needed to install an upgrade which I proceeded to do. I managed to download and install those and the Codec Detective doesn't give me that message any more. It just lists all of the installed codecs.
I gave vista a shot but I dont like it. I picked up a copy of XP and I want to remove vista entirely. Ive formatted computers before but was never sure if I was doing it the right way. Do I format the HD then install the drivers then install XP?
I have windows xp pro installed on my computer. Can I uninstall that and reinstall windows xp home and have everything cleared off my computer? I want to clean everything off of it and start over.
I have a computer that is a few years old. I installed XP Professional on it, and now it runs really slow. I have an old copy of Windows 2000 that I would like to install on my computer instead. Does anyone know how to do that? When I put in my Win 2000 CD, it tells me that I already have a higher version of windows on my system and doesn't let me do anything else.
I want to upgrade my OS from WIN 2000 Pro SP 4 to WIN XP Home SP 2. I have a retailer who offers this upgrade, but does not specify if you can upgrade from WIN 2000 Pro. In fact, they don't speciy what update options you have with this upgrade pakage (Form - To). I have e-mailed them asking if this upgrade will work for me. But, as yet, they haven't replied to my query. Will this this upgrade work for me?
I'm not very familiar with installing Operating Systems, and I don't want to screw this up. My computer is slow with XP Home ( but still usable ), so I'd like to do this properly. Also, do you think it'd be good to go back to 2000 if it works fine? I've heard there are many security flaws with 2000 Professional.
I have a Dell OptiPlex GX1 currently running Windows 2000 pro.I went to Staples yesterday and purchased XP Home Edition and want to upgrade the Dell. I thought I would be able to just put the cd in and start the process but it keeps giving me an error and says that This version of windows is not compatible, What do I need to do to get XP home to install on this pc?
What a pain. It says that upgrading from windows 2000 to XP home is not supported and when I go to reformat, it doesnt allow me to reformat the "partitioned space". It gives me no other option than to install XP on the same partition as Windows 2000, and then tells me it isn't advisable to do it. Whats up with that, and how do I get rid of 2000 so I can properly install XP home?I've unfortunately got XP partially installed, and when I reboot it will go to the black screen... but then asks do I want to start up with xp or 2000, so I start with 2000 and, well, frankly I am sick of this and just want it to install.If I'm going to screw around with this all the time, trying to keep these dang computers functioning, then I really need to take some classes, sheesh.
I was given an old Laptop from a National Canadian Bank. Here are the following statistics, It currently has Windows 2000 Professional but since it was from a Bank it has quite a bit of Bank related Software and Network settings. I was looking to format the drive and install Windows XP. I was told in another post on the forum that perhaps my laptop might not be the optimal to my system. Which Operating system should I install on this system?
I just got a laptop that is now running 2000 professional (intel pent. 2). My main computer has XP home (intel pent.3) They are both Compaq's. I would like to replace the 2000 on the laptop with xp. I have the install (retail purchase) disc for the xp. It will be a fairly long process using the install disc due to the updates required. Can I download the XP and other desired programs from my main computer onto the laptop (it has all required updates etc.) If so, could someone outline the process involved. I have a files and settings transfer wizard on the main computer that should be of help in the process. I also have Nero that would allow me to burn a bootable disc if necessary.
I was having trouble accessing my Windows XP Home edition from my dual boot Windows XP Home/Windows 2000 Professional system. I used both Win2K and WinXP CDs and their respective repair functions and no help. When I select the Windows XP Home operating system from the boot select menu I get a message that some file for Windows 2000 is corrupt and to use the Windows 2000 CD or F8 function.
I have just installed a fresh copy of XP Pro and am now attempting to install Office 2000 Midway through the installation a window entitled "windows file protection" pops up which reads: "Windows files must be installed for your installation to proceed. Insert your Windows XP Professional Service Pack 2 CD now." The buttons available to press are retry, more information and cancel. When i insert the cd i used to install XP Pro it tells me i've inserted the wrong CD- the same message comes up when i press "retry"After clicking cancel to exit setup, i get the message entitled "installer information"- "Error 1933- The windows installer service cannot update one or more protected Windows files"
I was attempting a repair install of 2000 pro. After the standard installation reboot i got error message: 0000263 driver entry point not found fltmgr. sys driver could not locate entry piont IogetDeviceAttachmentBaseRef in ntoskrnl.exe.
I'm trying to update my I-Tunes on my PC running Windows XP Home SP3. Installation cannot complete and I get the following message: Could not open key: HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerMedia. Verify that you have sufficient access to that key, or contact your support personnel. I have no idea what that means, this is my home computer so there are no administrators or support personnel why don't I have access to this key? How can I complete the installation?
I'm trying to get a new usb mouse to work on it, and I have the drivers for it - but when installing the 'new hardware', it reaches a point wherein it asks to insert the "Windows XP Home Edition CD-ROM", but I don't have one! It won't allow me to skip this, and if I click cancel, the mouse isn't installed, and an error window appears saying that an error occured during the new hardware's installation.
First of all is it worth my time or does vista have too many problems. my main concern is that i do not have the xp disc and if i want to go back to xp should i even bother.i do have the hp recovery tools disc for xp.
My system just shuts down while trying to install xp home (sp1 ver). And I am forced to shut down during the install. The install will get to the installing devices graphical user interface and quit at the 34 minute mark.Then upon reboot it will check the disk and other parameters and they check out ok, so... hence xp will resume the setup automatically and the process just repeats itself over and over and stall out at the 34 minute mark. Is there a reason for this?
I am trying to re-install XP HE over an unauthorized copy of XP Pro, why is it that when i reboot from the disk & i come to press F8 to agree with the terms nothing happens & all i can do is press escape to abort.My system is a P4 2.8 with 520meg of memory & and 80 gig HD.
i have just recovered from a very nasty virus on my machine i have reinstalled xp home oem i am able to access the internet using the IE but i am unable to access the internet when trying to activate xp the error is saying that i do not have a internet connection is there any help any one can give i have checked the connection and i am set up for a LAN this is what i have always done and it has worked in the past
I keep trying to install Windows XP (tried both professional & home edition) and when it starts checking my system, it gives me the following error (the error comes when it is checking (which is the 4rth messsage on bottom of window), "Setup is loading files (Kernel DLL)".I then get the error message "File setupdd.sys could not be loaded. The error code is 4. Setup cannot continue. Press any key to exit"I have searched high and low to find Error Code 4 in microsoft's web page and have found nothing.
I have read numerous articles pertaining to problems encountered after downloading SP4. If a computer is going to be used for home use only without multiple users, and only a printer, scanner and a DSL connection, should SP4 be installed?Are there any major benefits (or drawbacks) having SP4 installed?What is the best service pack to have installed for a home use computer?
I understand that if I install an OEM version it will be a new installation (not an upgrade) and all data files and programs will be wiped clean as part of the installation (step one is formatting the hard drive). I'm okay with that, because I have files on other machines and reinstall any programs that I need My question is reference to drivers being deleted and needing to be reinstalled. I'm not as familiar on the driver issue. Does this mean that most of the peripherals I currently have under Win2000 will not work with the initial installation of XP and I'll have to seek out drivers for these items (wireless NIC, dvd-rom, cd-rw, second HD?
Im installing a brand new pc and I just downloaded all the latest fixes and patches for the OS and the Browser.except one, KB890923. Everytime I try to launch through Windows Update it says it cant do it. SO I attempted to download and run it manually and it states that the program is not a valid Win32 application.
Am I right in thinking that they are both pretty similar except that server has support for multiple processors and extra network related tools and facilities. The reason I ask is that if a piece of software works on Windows 2000 server, is it extremely likely that it will work on Windows 2000 professional too? As a bit of background information: I work for a small company which supplies temperature monitoring equipment which needs to be networked. I've been told that it has been tested on Windows 2000 server but not on Window 2000 professional.