First of all, thanks for what looks like a great forum, and thanks for looking at my problem here. I installed an AOpen DVD RW in my Dell Dimension 3000 last night, and I also installed the included Nero 7 software. I tried to watch a DVD that was done in Dolby surround and I had no audio. Nero Prompted me that I needed to install an upgrade which I proceeded to do. I managed to download and install those and the Codec Detective doesn't give me that message any more. It just lists all of the installed codecs.
Some of my drive letters have been changed except my hard disks' drive letters, I have double SmartMedia and double CompactFlash I/II icons in My Computer, my CD-ROM icon is incorrectly associated with the CompactFlash I/II name in My Computer, my DVD-ROM icon is no longer visible in My Computer, and I can't assign drive letter F to my DVD-ROM drive in Disk Management because it's being used by CompactFlash I/II, though it's not listed there; all problems after uninstalling Nero DiscSpeed. Note: My CD-ROM and DVD-ROM are listed in Device Manager without warning icons. I've tried Doug Knox's CD-DVD Fix tool and deleted the LowerFilters registry entry.
Nero setup says "the application cannot start as it cannot create needed files. There may not be enough free space"winzip "unable to create temporary folder extract to.Possible cause:you do not have permissions to create files in your temp folder. see your netwk admin"
If you install Nero 5.5.5.1 on an XP machine that has MusicMatch Jukebox (MMJB) 6.X installed, you will experience the "lost CDROM drives" syndrome. This is apparently caused by conflicting CD burning drivers in Nero and MMJB. Uninstalling MMJB 6.X solves the problem with the lost drives and allows you to use Nero. Once MMJB 6.X is uninstalled, you can then install MMJB version 7.0, and you will have full functionality in both Nero and MusicMatch Jukebox.
I had the trial and I want to install the full, it's installed and it won't run.ANy ideas? I have heard there is a special way you need to uninstall but idk?
I have a pentium III Dell spare computer siting on a shelf downstairs with win pro 2000 installed on it. Is it a hard thing to uninstall that operating system and reinstall the windows xp home from my main home Dell computer?
Have a HP a340n,80 GIGS. new computer. it crashed, froze, and I did a reformat, then installed Windows XP Home Edition again, well, I plugged a set of headphones into the front of my computer, and after doing so, i lost all my sounds. it thinks that it is still there, but there is no sound. I tried installing and updating the drivers again, Realtek AC97, and still no sound drivers., when I looked into the system info, it shows yellow highlights on all the kernel applications listed. how do I get my sound working again?
I installed a new video card and when I started the computer up, I have no sound at all. Please help, I have all these games, and no sound! Its a brand new computer system setup for my little brother, and he can't even use it He's all bummed out, and if someone could help it'd be GREAT! The computer is a Gateway - and I looked through BIOS, and didn't see anything about disabling/enabling the onboard sound.
Try removing the card and see if you have the sound back. Se if you have sound with just the video card installed without its drivers. If same issue on Xp, Vista, the most probabily the card is not supported on the computer.Try a clean reinstallation after installing the video card.
I upgraded from Windows 98 to Windows XP and now no sound work on my computer.I get this message when i try play songs through Winamp"Bad DirectSound Driver. Please install proper drivers or select another device in configuration. Error code: 8878000A"
I recently purchased a Gateway MT6452. It came with Vista. After I ran out of patience I installed windows XP. I am having a problem installing the sound card driver. It is identified as sigmatel 9250. I think I have tried every driver on the net and nothing seems to work.
For some reason Windows keeps telling me that ALL drivers i install aren't "Windows Logo verified" and asks me if i wanna procceed or not, while this might seem normal i know that its not, becouse drivers that i used to install with no problems now this happens. Also i have LOTS ( and i really mean LOTS ) of "Found new hardware what action do you want to take" dialogs during an hardware instalation when this also didn't used to happen before. For example i just installed my X-Fi Sound Card, before it would install with no prompts what so ever, now when i'm installing it i had about 15 prompts telling me that it found new hardware and i had to choose "Find drivers automaticly", and after i did that i would get the "Driver is not Windows Logo Verified" prompt. It all seems to work fine eitherway if i just choose "continue" with the prompts, however this is becoming quite annoying since it happens for every driver i install.
PC with Windows XP Professional Edition 2002 SP2 has no sound.I tried installing Sound Blaster,but this is the error I got: That is the error message I get when I try to Install Setup.exe,which I need to use to install Sound Blaster.My PC won't let me install Sound Blaster without setup.exe it says the setup.exe I have doesn't work, which can't be installed without installing IIS.
i have an hp 532w, It came with windows xp home edition on it. recently I used a Dell version of Windows XP Pro and installed it over my hp home edition. I lost my sound and when I look at my device manager i see a little yellow flag by my multi media controller. If I try to Upgrade the driver I get the blue screen of death. I tried to reistall my origanial operating system, from my 8 recovery disks it won't let me. I trie booting from it and it won't let me. It sez I'm missing (windowsroot) system32hal.dll.
I recently had a CD burner installed in this current computer, the associated software is Nero Express and works very well. I was told that I could upgrade my Nero 5 software, which is on another computer CD burner. I un-installed Nero 5 and upgraded to Nero Express and got all sorts of problems, example - all the desktop icons disappeared and I could only get programmes from the taskbar. So I un-installed Nero Express and re-installed Nero 5. This resulted in Windows 2000 Pro. re-booting itself continually. Up to the present time no-one has been able to provide me with a solution. Office 2000 Pro. is my choice for emails and all office work. Other programmes that I used were Spybot S.& D., Microsoft Anti-spyware Beta and A.V.G. Contacting the Nero site has proved to be an exercise in futility, so here I am asking for help. The start-up process works alright as far as 'Setting up Network Connections' and then re-boots.
Iam using Nero6 to encode and burn movies to DVDs. I have finally got it all working. But the encoding part takes about 3 hours for some movies and the subsequent burning takes only about 15 min / movie. Is it possible to queue the encoding process for, say, three movies and save the separate encodings to image files for later burning to three DVDs? I can do this for one movie but I cannot figure out how to queue them. My idea is to set this up so the computer can work overnight.
XP SP2 with Nero + Verbatim DVD-R: Used this to burn a DVD 3.9GB it burned fine. Data Verification completed successfully. I then checked the compilation using my computer and everything was dandy super BUT to double check I put the DVD in my laptop DVD drive nothing, disc was not even recognized.
I installed Nero Ultra 7 Edition, every thing went fine, but there is no icon on my desktop for it. I have looked everywhere for it cant be found. I have installed it 2 times. Hope you can help me.I have Windows XP Profesional SP2.
I'm not happy with the Sonic software that came with my computer.I would like to edit dvr-ms files (among many other things)and am wondering what you think of Nero 6.6? I have their cd burner at work and like it.
When I'm burning DVD-s with nero the computer is very slow!I mean like the mouse even is lagging (i'm not sure if that is the right word ), when I click on an icon the indication (when it gets blue or something) is coming after a second or more.If winamp is playing a song, it starts drawling (the same happens when i click on thumbnail veiw of a movie on a dvd!)!
When i try to start a program, or open a folder the buffer (that nero shows) is at 100% and the folder opens after a 15-20s!When i open more than one program, the buffer drops to 50% and the computer is even slower!When the burning ends everything is ok..the computer is behaving normal!What could be the problem!I don't think it's from the hardware (1 GB Ram, Athlon 64 (3200+), 128MB Video)!Now i'm scanning with mcafee 2008 and after that i'll run ad-aware and spybot!
I tried to install my old Nero w/full lic key but it wouldn't.
Giving up the idea... I proceeded to remove every file with Ahead Or Nero in it. Used jv 16 Power tools to remove left overs. Nothing now shows in jv16 or search of all files & folders (with hidden & system showing). Ran CCleaner including other MRUs etc.
I recently downloaded loads of music video's with a view to burning them onto DVD using my Nero 7 DVD Burning Programes. I had 75% free space on my hard drive at that time. Many of these video's were flv format so I had to download and install a flv to mpg video converter programme. After converting the video's from flv to mpg so that Nero would accept them and making up the music video compilation using Nero 7 I noticed that I had only 4% free space left on my hard drive. So I couldn't get on with the second compilation. Nero told me I needed more hard disc space. I then deleted all the music video's I no longer needed, both the flv versions and the converted mpg versions
I have been using my home built computer for about 3 months. I am using WinXP Pro. My CD-RW drive hasn't been seen as a CD burner. In My Computer, the CD drive comes up as "CD Drive (D: )". When I try to drag and drop files in the Windows Explorer window and then click "Burn to CD", it says there is no CD-RW drive. But when I use Nero 5, it works fine.
What is the problem and what do I do to fix it? (I'm not going to reinstall Windows!)
If i try to burn a dvd, used DVD Shrink and Nero so far to attempt to burn some dvd files.my soundcard makes a high pitched sound BEEEEEP then goes silent when i try to burn a dvd REALLY STRANGE MAN!it just remains at 0% on DVD Shrink and 1% on Nero.I cannot shut down or restart, I also cannot open any other software like Internet Explorer afterwards, I have tried to re-install the ASPI drivers which never made much difference, anyone got any ideas why this may be happening? I can read dvds no probs it`s just when it comes to writing the dvd i have issues.
How I thought this was a Nero problem but I Have just uninstalled one version of Nero 6.6.0.8 and replaced with my bros earlier version 6.6.0.3 both original discs.This problem is also seen on Clone DVD2.I am now convinced this is a Windows problem.This is whats happening.I am unable to copy DVD's with Nero whether they are Video/MP3 files.Every time I click on copy I receive a warning "disc capacity not big enough".I had the same problem 4 years ago with totally different equipment and totally different software and I remember wiping the hard drive to solve it.(which is not the way I want to go)I have Nero 6 Ultra Edition Version 6.6.0.8 installed ( Now 6.6.0.3 )
I get this error when starting various programs like nero and a couple other it started two days ago and I don't know how to fix it.In the screen shot that I took is when i tried to open nero but this has also happened with avg and cnc3. I've tried a system restore and it went away for a bit but is now back [URL=http://imagenerd.com/show.php?_img=helpFKLX.jpg][IMG]http://imagenerd.com/thumbnails/th_helpFKLX.jpg[/IMG][/URL]
This is a very silly question but I accidently checked the box telling my computer to always open AC3 files with my Nero program. I would like to have the AC3 file not be assigned to any specific program but I do not know how to do this.The only option I have is to assign them to another program. What I am trying to say is I would like to go back to the way it was before I assigned them to Nero so I would get a message telling me that windows could not open the file and then it would ask me to choose a program to do so.
I am trying to burn an iso image to a DVD+R disk using NERO 7.0 Ultra Edition and for some reason when I go to burn the image, it tells me I need a CD-R or CD-RW. I just bought some DVD disks for the first time yesterday. I have used regular 800Mb CDs to burn iso images before with no problem. What's the deal with the DVD iso burning?
