I have a dual boot PC, Windows ME on one HDD and XP on another,but for some reason the windows XP setup is now one of the options, and I 'd like to get rid of it without messing up the bootlog. The following is my boot file, anyone know how to edit it to get rid of the "XP setup" option without messing up everything else.
View 3 Replies
A week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
View 2 Replies View RelatedI went to try to install windows xp onto a computer that already had windows on it. I did not boot from the cd. To do it without using the cd it has to copy the installation files to the computer and then run them. When setup does this it creates a new choice of an operating system to boot from called "Windows XP Setup." So now I have a Windows XP and a Windows XP setup. I've been in msconfig and looked at boot.ini but that didn't help
View 8 Replies View RelatedI format windows 98 with win98 startup disk and windows XP was installed. every start the pc,it prompt two boot loader for option.windoes 98 or windows XP. How to delete the window 98 option on the boot loader screen because windows 98 had been formated.
During System startup, the system always halts at "Strike F1 to retry boot, F2 for setup utility". The only way I can manage to boot to Windows is by selecting "Boot to utility partition" from the Boot Device Menu or if there is a Windows XP installation CD in the cd-rom drive. When I boot this way, everything works fine .This behavior started when I performed a fresh install of XP Professional (XP Home came with the system). The problem did not start immediately after the installation; I was able to install some drivers and reboot a couple times (maybe twice) before it happened. When I installed the display driver (from Dell) and rebooted, it went to the "Strike F1. " screen. I have since tried another fresh installation of XP Home (the original OS) and the problem is still occuring. This time it occurs immediately after the installation; No drivers have been installed at this point.
View 16 Replies View RelatedCan someone give me some advice on how to remove the automatic restart on my XP SP3 based PC which is continuously rebooting without stopping at the error screen that indicates what the issue is?The error screen is only visible for a second before the reboot begins.Without Windows access to the startup options, is there a way to disable auto restart?
View 6 Replies View RelatedI set my PC up as dual boot, with XP on the C drive and 98 on the D (or is it E) drive. But when I boot under 98, during the boot process I get two options:- Windows XP Setup - Microsoft Windows (which is Windows 98) Of course the cursor by default lands on Windows XP Setup, so if I do nothing that launches automatically and I have to quit, restart, etc.I figure I must have installed this when I was initially setting up XP. Is there some way to get rid of it? I no longer need to "set up" XP, and want it to just boot into 98 by default when I select that drive as my boot drive.
View 1 Replies View RelatedWhen I start my pc I get an option to either start Windows XP or to run Windows XP Setup. If I am not quick then it automatically selects Windows XP setup where it goes into the intial setup screens where I need to quit and re-boot the PC. There is nothing wrong with my pc and I have no need to carry out any setup tasks, what I want to do is to get rid of this option.
View 4 Replies View Relatedi recently wanted to installed a few windows components from the windows xp installation cd. during the install i cancelled it. but the next day when i booted up the pc i got two options in the boot menu. It asked wether i wanted to boot "windows xp home edition" or "windows xp setup" How do i get rid of this "windows xp setup" boot option?
I recently re-installed XP and now when my computer boots up I have 3 choices Windows XP Professional Windows XP Professional Windows XP Professional Setup It gives me 5 seconds to chose which system I want to load, if I don't make a choiceit automatically loads the Setup. The only one I need is the first XP Professional listed
View 1 Replies View RelatedI had win xp installed on my C:, then installed win2k on my G:. I reformatted my C:, and when I restarted my computer, it could not boot into win2k.. it gave me an "insert system disk" error
View 2 Replies View RelatedI have finally managed to install XP after nuking the original Vista, which I reinstalled on a second partition.I am now booting Vista as default and selecting XP from the Vista boot menu.I want XP to be the default OS but Vista doesn't appear in the XP boot menu so I need to edit it to include Vista.Below is my current XP boot.ini file, with XP on C: and Vista on D:Quote:;Warning: Boot.ini is used on Windows XP and earlier operating systems.Warning: Use BCDEDIT.exe to modify Windows Vista boot options
View 14 Replies View Relatedwhen I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
View 14 Replies View RelatedI changed my boot option using msconfig to safe mode. But I didn't realize I needed a local username/ password to login. So now I don't know a local username password and pressing F8 and specifying Normal mode still boots in safe mode.
View 14 Replies View RelatedI"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done:
1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%)
2)Removing all connected Componets and rebooted, same problem.
3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
I'm trying to access IIS on my XP and there is no option for it on the Windows Components page, I assumed IIS came with XP, is there another way to access it or can I send off for software?
View 6 Replies View RelatedSomehow I was messing with the shortcuts in my start menu and converted my theme to WINDOWS CLASSIC.
I went back to my DISPLAY/APPEARANCES settings and found that the WINDOWS XP theme option is now gone!
HELP! I feel like I'm trapped in Windows 95 right now. I actually liked the XP color/pattern scheme!
What can I do to get it back?
I have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies View RelatedWhen I press Alt + Ctrl + Delete in my office iam getiing an option to lock the windows , but when i do the same in my house i straight away get the task manager. Is there anything that i can do in windows to get that option . I have windows XP OS .
View 3 Replies View RelatedSomething weird has happened. I left my asus F6a to my cousin for a few minutes and all I got was a trojan. It seems I removed it, but now the pc will only boot if I select cd/dvd first boot option and I put no cd/dvd inside! I discovered it by chance, cause if I but it normally from the hard drive, I only got a black screen.
View 1 Replies View RelatedI have XP MCE2005 and I am desperatly trying to find a way to choose
different boot option during startup.I do quite different things with my MCE, I like Playing games, Editing Photos, Editing Videos, PVR series, work, etc.I have many different programs for each application , many of which have entries in the start up and services. ALL are loaded during start up, consuming unI which to know if there is a way to create various start up or boot option were I can predefine and choose a proble for 1) Gaming 2)Video/Photo editing
I have been noticing that whenever I reboot my computer, or even at random intervals, that the wave portion of the volume menu goes to zero and it makes the sound on my computer go very quiet. I can move the wave dial back to the max and everything works alright, but I was wondering if anyone has any ideas on why this would be happening. I am running the onboard sound which is nvidia based, but not sure if there are any more current drivers than what I am running.
View 2 Replies View RelatedI'm sure this has been posted on here before, but bear with me because I didn't know what to search under to find this answerDuring my system boot-up, I have the option to choose from 2 different Windows XP's. The one that I boot-up off of is on my smaller hard drive, which just has Windows on it. I have a now non-existent version of Windows on my main hard drive which was put on there when I was fooling around in college, and apparently I never properly got rid of the OS on my main hard drive.
View 5 Replies View RelatedCan any one tell me how to set the "Recovery Console" as a boot option? I also don't have a CD of Windows XP pro, is it still possible?
View 6 Replies View RelatedHad to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name
What should i do at this stage?
I am trying to install windows xp sp 2 over windows xp on 2 computers and the same thing has happened with each computer.I get down to 36 minutes left - installing drivers - and the setup restarts. I tried to remove the cd and xp then asks for the cd telling me it needs the asms driver, xp then is directed to search e:I386. Xp looks for it there then spontaneously restarts again. The setup is in an endless loop going from 39 minutes remaining till 34 then restarting over and over again. How can I stop this and/or correct this? I did some research at the microsoft site but I have been unable to make anything work.
View 3 Replies View RelatedI've bought a new notebook.The specifications you can see from my profile.
I've got an AMD Athlon 64X, X2 1.80GHz TK-55 Processor.
I've tryed to install the Windows XP SP2 64X Edition, at the setup Windows didn't install?!
using windows xp how do I get in the BIOS Setup screen
View 1 Replies View RelatedI can't get XP Pro to get past "Setup is starting Windows" ,to allow me to format.Loads all drivers up to that point,then the error in above post.Pressing F6 or F10 to install 3rd party(XFX MB drivers) has no effect,and Alt-F2 ultimately gives error also.S prompt is no joy also.Tried F8 for Safe Boot and no joy.Cleared CMOS several times.All drives are there in CMOS. All RAM (4 Gigs) is detected I raised Memory voltage to 1.9 volts standard for my ram),and raised FSB to 1600 Mhz from 1333 (standard also).Put timings to standard 7-7-7-24T Tried Memory linked/unlinked/Auto/1T/2T I Tried only 1 SATA drive,and 1 Gig of RAM with 1 DVD RW /2 drives and 2 Gig of RAM,I Enabled standard RAID for each and every drive and ultimately disabled them cause I want the XFX 790i ultra motherboard RAID Drivers.
View 6 Replies View RelatedWhen i put in teh Win xp disc its starts loading teh file etc.. and then when done after i press enter and "Setup is starting windows" its freezes andi get liek A black dot and a few like patterns on the screen or soemtimes teh screen just goes mad liek with different colourd patterns but ontop of the blue "Setup is starting windows" screen ive checked teh disc and made a copy both work fine checked teh CD rom works fine put a diffremnt cd rom drive in and made no difference cant check ram because my computer doesnt take DDR2. ive put diffrent IDE harddives in with and without a SATA convoertor and the same thing happens with the "Setup is starting windows" also when i start the computer up before i boot from cd or anything after all that without booting from CD i get a BSOD code 0x07B.
View 8 Replies View RelatedI want to install Windows XP Pro 64 Bit on my Hp dv9907ca, which came with Vista Home Premium 32 Bit. I upgraded my RAM to four gigs, and get better gaming on XP and I'd like to upgrade my 32 bit to 64, problem is, the installation hangs as soon as it gets to 'Setup is loading Windows' still int he text based installation. I believe I read somehwere it's because of some sort of hard drive connection that's in newer computers, and XP doesn't have drivers for it. So basically, I'm wondering if soeone can figure out what's wrong, and tell me exactly what I need to do in order to get XP to work, now this is a laptop so I can't change any parts in it or anything like that.
View 10 Replies View Related
