Can't Boot To Windows / Strike F1 To Retry Boot / F2 For Setup Utility
Aug 10, 2009
During System startup, the system always halts at "Strike F1 to retry boot, F2 for setup utility". The only way I can manage to boot to Windows is by selecting "Boot to utility partition" from the Boot Device Menu or if there is a Windows XP installation CD in the cd-rom drive. When I boot this way, everything works fine .This behavior started when I performed a fresh install of XP Professional (XP Home came with the system). The problem did not start immediately after the installation; I was able to install some drivers and reboot a couple times (maybe twice) before it happened. When I installed the display driver (from Dell) and rebooted, it went to the "Strike F1. " screen. I have since tried another fresh installation of XP Home (the original OS) and the problem is still occuring. This time it occurs immediately after the installation; No drivers have been installed at this point.
View 16 Replies
ADVERTISEMENT
Apr 19, 2006
I went to try to install windows xp onto a computer that already had windows on it. I did not boot from the cd. To do it without using the cd it has to copy the installation files to the computer and then run them. When setup does this it creates a new choice of an operating system to boot from called "Windows XP Setup." So now I have a Windows XP and a Windows XP setup. I've been in msconfig and looked at boot.ini but that didn't help
View 8 Replies
View Related
May 26, 2005
When I start my pc I get an option to either start Windows XP or to run Windows XP Setup. If I am not quick then it automatically selects Windows XP setup where it goes into the intial setup screens where I need to quit and re-boot the PC. There is nothing wrong with my pc and I have no need to carry out any setup tasks, what I want to do is to get rid of this option.
View 4 Replies
View Related
Sep 9, 2008
I am running window xp home edition, Dell 8200 1.75GHz 256MB with the latest service pac=sp3 Everytime I turn my computer on, I get this message Strike F1 to continue F2 to run setup. This has been happening for the past few months..not sure when it started,other than that everything seems to run okay. Anyone know how to remove this message from running during start up?
View 4 Replies
View Related
Jun 24, 2006
i recently wanted to installed a few windows components from the windows xp installation cd. during the install i cancelled it. but the next day when i booted up the pc i got two options in the boot menu. It asked wether i wanted to boot "windows xp home edition" or "windows xp setup" How do i get rid of this "windows xp setup" boot option?
View 1 Replies
View Related
Oct 27, 2007
I"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done:
1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%)
2)Removing all connected Componets and rebooted, same problem.
3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
View 10 Replies
View Related
Dec 9, 2005
I have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies
View Related
Jul 14, 2007
I have a dual boot PC, Windows ME on one HDD and XP on another,but for some reason the windows XP setup is now one of the options, and I 'd like to get rid of it without messing up the bootlog. The following is my boot file, anyone know how to edit it to get rid of the "XP setup" option without messing up everything else.
View 3 Replies
View Related
Jul 4, 2005
I have a Windows XP Pro system that became hosed during a failed attempt to apply SP2 and now is in a "Incomplete install rebooting" loop. Before attempting to recover, I would like to boot into a command prompt. hopefully from a bootable CD... and back up any critical files before messing around. (Security files, registry, etc.)Does anyone know of a utility for accomplsing this?
View 5 Replies
View Related
Sep 11, 2005
I used the backup utility that comes with XPPro/(i am running sp2) and used the wizard process.I chose the one that says you will be prompted to make a floppy once the back-up is done.The back up is done(i copied the whole of "C" drive onto another drive on my machine) but there was no prompt to make a floppy.I guess i have two questions..
1. what happened to the prompt, how do i get the wizarfd to work etc etc
2. to make my own floppy, what files should i put on it?
View 2 Replies
View Related
Dec 21, 2004
I have just done a repair of xp things are just about right apart from a few item..SYSTEM CONFIGURATION UTILITY Always pops up from booting pc up on desktop I have clicked the bx but it still wants to pop up saying I have change some items on start up....I press don`t show me this again but on stsrt up it still pops up.Also slight delay from windows welcome screen to desk top about 30 secs configu msconfig to reduce ammmopunt in start up but still slow.
View 14 Replies
View Related
Jul 1, 2008
After running a defragmentation, I received a message that 6 mb of system 32 did not defrag. the system ran, closed, then when booted up the next day I received the windows 32 error. I have an OEM windows xp installed in the computer, a pentium III gateway, and i understand that common recovery proceedures cannot be used with success, because the OEM versions have embedded passwords and such. I have not heard strange sounds from my hard drive, previous to , and subsiquent to the problem. I wish to run chkdsk,to see if this can resolve the problem, if the OEM version will allow it. Is this possible, and the fact that I have a D drive slaved to the c drive matter?
View 6 Replies
View Related
Sep 1, 2009
The Boot.ini Tab missing from my System Configuration Utility (msconfig.exe) Dialog Box. Everything else is OK and have all other functionality with msconfig.exe Yes - the Boot.ini file is in the root of C: and I can open and view it in Notepad just not in msconfig
View 6 Replies
View Related
Aug 2, 2007
How can I delete an item from my BOOT.INI in te system utility so it stops showing up on startup?
View 14 Replies
View Related
Nov 20, 2006
Ok i made an Xp bootable CD. I did this 2 times and I followed all the instructions, burned it in nero as CDROM (boot) with all the correct settings. I downloaded the XP boot record (bin file) and I used that as the boot image.However, when I use this on the computer I am tryikng to install it on, it says "searching for Master boot record on CD.." for about 15 seconds on startup and then just boots from the existing hard drive OS because aparently it can't find the boot record.The cds work fine on my laptop, if i put it in and run it after my laptop is already started up, the windows xp menu for installationcomes up fine.never had this happen before so i don't know what the problem is.. i changed the boot priority so it is trying to bootfrom the cd rom, but just cant.
View 13 Replies
View Related
Sep 19, 2007
I have a very old laptop laying around my house. so i wanted to see if it still works. i booted it up into windows xp. And it was unbareablaby slow. So i decided to wipe out windows and install ubuntu. i burnt a xubuntu cd and put it in the laptop's external cd drive, set the bios to boot cd before harddrive. It didn't work. i then tried booting it on my working computer, it worked. so therefore, my laptop cant boot from cd, but my laptop could read the cd drive in windows. It said hal.dll corrupted, so i went back to windows and downloaded hal.dll from a website. i replaced the hal.dll in windows and rebooted. tried selecting ubuntu but didn't work, then tried to boot into windows, but didn't work. so right now, i have a laptop that doesn't have a working os.
View 5 Replies
View Related
Aug 5, 2010
I have 2TB SATA HDD for storage purpose and one SATA HDD for my OS, how can i setup my bios to be able to boot to my OS?
View 2 Replies
View Related
Aug 3, 2009
My friend told my about TinyXP (windows xp with a lot of crap left out = fast)
I don't know if I can give you the link where I got it because maybe that will be seen as advertising.But whatever, the problems I have don't have to do with the TinyXP specific I think, they are also occuring when isntalling a normal windows XP versionWhenever I boot from my cd, the setup is loading But after that, I get: the setup is starting and then BOOM, blue error screen:Quote :A problem has been detected and Windows has been shut down to prevent damage to your
Computer
View 12 Replies
View Related
Mar 8, 2005
I currently have two partitions on my computer with 98se on one and xp pro on the other. They're both formatted in FAT32. I want to get rid of win98se but keep XP pro and all my data. Also I'd like to change the file system from FAT32 to NTFS.
View 5 Replies
View Related
Jan 3, 2006
Does anyone know if it is possible, or has done, a dual-boot setup of Win XP Pro and Win MCE (2005)? I'm curious to know if it is possible and if so, what is the best way to go about it and any potential problems.My current setup is I have a Athlon 64 3800+ with 1TB RAID 0 running Win XP Pro. I have partitioned the OS onto C: with 50GB and left the rest as general storage for the moment. I also have a digital TV tuner card, which is why I'm thinking of installing MCE.
View 3 Replies
View Related
Sep 16, 2005
I've got two operating systems on my computer. One of which isn't set up. this is causing my computer to automatically boot up into setup for that OS. I need to find out how to delete it.
View 6 Replies
View Related
May 5, 2006
I have been using this PC without any problem for 6 months. I wanted to reinstall my Windows XP on my PC and tried to booting up with a bootable Windows XP_SP2 Prof CD(first boot is CD ROM). But to my surprise, the setup process in not taking place. I am getting a grey blank screen(instead of windows setup screen) after this message "Setup is inspecting your Computer's Hardware configuration".This is the case only with the Windows XP bootable CD. I have tried to boot with different WinXP CDs, but of no use. However, I am able to boot with Win 98, Win 2000 and even with Win 2003 via boot CDs.I am suspecting whether there is any problem with the motherboard, as I was able to install Windows XP Pro before on the same PC.
View 2 Replies
View Related
Mar 29, 2008
I'm going to build a new computer. It will have a new 500 GB Seagate 7200.11 32 MB cache. I want to reuse my current 500 GB Samsung Spinpoint 7200 RPM 16 MB cache, which is currently used only for backup storage. What's the best way to have both XP and Vista on the new computer (which is also possible to do)?Vista on the new Seagate; XP on the the old Samsung (will all my files be wiped out during the installation?)The reverse of the above XP on 100GB partition on the new Seagate; Vista on the remaining 400GB; use the old Samsung as I have been all this time. XP will only be used to run Internet Explorer 6 and minimal web design tools.
View 1 Replies
View Related
Nov 23, 2008
How do I establish a dual boot system? I am running WinXP on both drives.
View 12 Replies
View Related
Jan 16, 2007
ive reformatted my hard drive once or twice before but this time after it has copied all the system files to the computer and it restarts it goes right back to the system set up screen and asks what i want to do and never actually botts xp from the hard drive.
View 5 Replies
View Related
Jun 8, 2005
I have two hard drives, both of them with Win 2000 Pro. The First has been the master in machine one from the start. The second HDD has been in machine twoand that machine has crashed so bad that it is not worth the time, energy or money to fix it. This second HDD has important data on it that is only accessable through older programs that are only on this drive. (It is a church membership data base program and a church financial record program) I have the added problem that no one in the office has a clue where the install disk are for these programs and they are not where they are suppose to be (this was before my time). I would like to place the second HDD in the first machine and set up a dual boot so the user can choose which drive to operate from. There is the added problem that the computers only have a restore disk that came from Dell and not a full Win 2000 Pro CD.
View 4 Replies
View Related
Dec 2, 2004
On my box at home, I have Norton System Works, which contains a registry diagnostic/sweeper.At work, where I run Windows 2000 Pro, I was wondering...I know there are various registry diagnostic & cleaner utilities out there on the web, but I thought I had heard that Windows itself either includes one on the OS disc or makes one available for download.Is there such a thing as an official Windows Registry utility?
View 8 Replies
View Related
Jun 27, 2005
I recently had to use system config. to find a problem. I checked normal startup and restarted my computer.Now when I start my computer I get the System Config. Utility Screen telling me I have to set it for normal setup. How do I resolve this problem. I'm using XP Pro.
View 3 Replies
View Related
Sep 2, 2008
A week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
View 2 Replies
View Related
Jun 12, 2005
I have two WIN XP operating systems and use XP's inbuilt bootloader to switch between them. First drive is C: and the second is G:. Only C: drive is active This works OK but both drives are visible. Is this the correct setup?
View 5 Replies
View Related
Jul 9, 2008
I have a dual boot system setup. One each on it's own partition. I would like to delete 1 so it will free up the hard drive space for the other. How do I go about doing this. One OS is server 2000 and the other is server 2003.
View 14 Replies
View Related
