I currently have two partitions on my computer with 98se on one and xp pro on the other. They're both formatted in FAT32. I want to get rid of win98se but keep XP pro and all my data. Also I'd like to change the file system from FAT32 to NTFS.
View 5 RepliesI have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies View RelatedI have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies View RelatedDoes anyone know if it is possible, or has done, a dual-boot setup of Win XP Pro and Win MCE (2005)? I'm curious to know if it is possible and if so, what is the best way to go about it and any potential problems.My current setup is I have a Athlon 64 3800+ with 1TB RAID 0 running Win XP Pro. I have partitioned the OS onto C: with 50GB and left the rest as general storage for the moment. I also have a digital TV tuner card, which is why I'm thinking of installing MCE.
View 3 Replies View RelatedI'm going to build a new computer. It will have a new 500 GB Seagate 7200.11 32 MB cache. I want to reuse my current 500 GB Samsung Spinpoint 7200 RPM 16 MB cache, which is currently used only for backup storage. What's the best way to have both XP and Vista on the new computer (which is also possible to do)?Vista on the new Seagate; XP on the the old Samsung (will all my files be wiped out during the installation?)The reverse of the above XP on 100GB partition on the new Seagate; Vista on the remaining 400GB; use the old Samsung as I have been all this time. XP will only be used to run Internet Explorer 6 and minimal web design tools.
View 1 Replies View RelatedHow do I establish a dual boot system? I am running WinXP on both drives.
View 12 Replies View RelatedI have two hard drives, both of them with Win 2000 Pro. The First has been the master in machine one from the start. The second HDD has been in machine twoand that machine has crashed so bad that it is not worth the time, energy or money to fix it. This second HDD has important data on it that is only accessable through older programs that are only on this drive. (It is a church membership data base program and a church financial record program) I have the added problem that no one in the office has a clue where the install disk are for these programs and they are not where they are suppose to be (this was before my time). I would like to place the second HDD in the first machine and set up a dual boot so the user can choose which drive to operate from. There is the added problem that the computers only have a restore disk that came from Dell and not a full Win 2000 Pro CD.
View 4 Replies View RelatedA week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
View 2 Replies View RelatedI have two WIN XP operating systems and use XP's inbuilt bootloader to switch between them. First drive is C: and the second is G:. Only C: drive is active This works OK but both drives are visible. Is this the correct setup?
View 5 Replies View RelatedI have a dual boot system setup. One each on it's own partition. I would like to delete 1 so it will free up the hard drive space for the other. How do I go about doing this. One OS is server 2000 and the other is server 2003.
View 14 Replies View RelatedI have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies View RelatedI'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI hooked up the PCI video card and when i plugg both monitors in, the intergrated video card gives a yellow exclamation point in the device manager and nothing shows up on the monitor. Only the PCI video card shows signal..I tried un-installing both cards, redoing it from ground up, tried disabling and renabling both cards but only one monitor shows up and that is the PCI card.
View 1 Replies View RelatedMy work PC has 2 monitors, and my home PC has 1. When I connect to my work PC, I see only the primary monitor, which is what I want. I have a problem with a certain application though, it opens properly in the primary monitor, but has a dialog box that seems to be opening in the secondary monitor (I can't see it, but I am able "guess" my way around it with the keyboard). Is there any way to force everything onto the primary monitor?
View 6 Replies View RelatedI have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
I am running Windows XP and would really like to share the hard drive with another OS "Linux" and dual boot.
View 1 Replies View RelatedIn the past, I have used the S-video port (with RCA adapter) in a dual view setup with my TV. I recently reinstalled Windows XP and now I can't get the secondary display (the TV) to work correctly. I just get a bunch of black & white lines moving up the screen (looks like bad reception/static on a TV). The weird thing is that the TV displays everything fine during the bootup process, including the loading screen with the Windows XP logo. Full color and everything. It's when Windows actually starts that the TV freaks out. Another weird thing is if I use nVidia's TV setup Wizard and select "Span," the image on the TV actually stabilizes. But I am forced to keep a low resolution on the monitor (which wasn't the case before I reinstalled XP), and as soon as I make any other changes the TV goes back to freaking out.
View 1 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedI have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies View RelatedI"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done:
1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%)
2)Removing all connected Componets and rebooted, same problem.
3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
During System startup, the system always halts at "Strike F1 to retry boot, F2 for setup utility". The only way I can manage to boot to Windows is by selecting "Boot to utility partition" from the Boot Device Menu or if there is a Windows XP installation CD in the cd-rom drive. When I boot this way, everything works fine .This behavior started when I performed a fresh install of XP Professional (XP Home came with the system). The problem did not start immediately after the installation; I was able to install some drivers and reboot a couple times (maybe twice) before it happened. When I installed the display driver (from Dell) and rebooted, it went to the "Strike F1. " screen. I have since tried another fresh installation of XP Home (the original OS) and the problem is still occuring. This time it occurs immediately after the installation; No drivers have been installed at this point.
View 16 Replies View RelatedI have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
I just upgraded my system a couple days ago and have been having several issues. First, Vista wouldn't recognize my onboard sound and LAN from a fresh install No available drivers, go figure. So, I had to install two copies of Win XP SP2, and then upgrade one of them to Vista. A pain, but the only way I could get everything to work properly.
I got everything where I wanted it, life is good. Then I'm booting into Win XP and I have two identically named Win XP OS's in the bootup screen. So as not to confuse my wife, I went into the Startup and Recovery options menu (Again this is in XP) and deleted, what I thought, was the XP I used as an upgrade to Vista. Turns out I got the wrong one. Now I can't boot to XP, but Vista is working fine. Basically, when I choose "Earlier Versions of Windows" I get HD activity for a moment, but then everything seems to halt. No responce from the keyboard, so I have to do a Hard Re-Boot.
I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 Replies View RelatedI have had this weird problem that seems random (i know computers arent really random but I cant figure out the cause). I have Win7 and WinXp in a dual boot working fine then after like a week of everything being fine my XP will not boot. I get to the Boot Manager and select XP and the screen just goes black and the system reboots back to the Boot Manager. I am having trouble finding the exact problem because I dont know win booting very well. I am assuming the MBR is fine because it gets to the Boot Manager fine. So I figure it is something with the WinXP partition. Win7 boots perfect. I have tried resetting up the boot with Easy BCD 2.0 beta (way better than 1.x) with no success.
This is not the first time this has happened, I end up having to either install XP fresh or do a repair install. I made a Acronis True Image backup and when everything was working then restored it with no success. I am getting really sick of this happening though because this is like the 6th time this has happened. The XP install is only used to game so it is bare minimum programs. I would appreciate any help in finding the route of the problem so that I can fix it instead of reinstalling the OS.
I had a Win 98 SE PC on a 20 GB drive (FAT32), and then I decided to ad an 80 GB and install Win XP. Since I wanted to maintain some Win 98 function compatibility, I opted for dual-boot, formatting my 80GB HD to NTFS and installing all of the Win XP OS into that drive. The Win 98 runs fine and is limited to the 20GB FAT32 HD, while the Win XP can see both drives but its files and programs are contained in the 80GB NTFS HD.
Now that I have deemed the Win 98 OS no longer necessary for this machine - I am trying to figure out how to make my machine boot from the XP HD (I plan to format the 20GB disk and use it for back-up storage
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
I have done some searching and it seems that other people who have had this problem, have been installing ubuntu. I havn't managed to come to a solution. I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyways got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists.
View 2 Replies View RelatedI installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyway got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists. How do I boot to the blue setup screen for my second copy of XP?
View 4 Replies View RelatedI need to add another boot instruction to boot.ini to start xp on the d drive on the second disk - partition 1. This is what I already have
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[operating systems]multi(0)disk(0)rdisk(0)partition(1)WINDOWS="microsoft Windows XP Professional"