I hooked up the PCI video card and when i plugg both monitors in, the intergrated video card gives a yellow exclamation point in the device manager and nothing shows up on the monitor. Only the PCI video card shows signal..I tried un-installing both cards, redoing it from ground up, tried disabling and renabling both cards but only one monitor shows up and that is the PCI card.
View 1 Replies
I have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies View RelatedI currently have two partitions on my computer with 98se on one and xp pro on the other. They're both formatted in FAT32. I want to get rid of win98se but keep XP pro and all my data. Also I'd like to change the file system from FAT32 to NTFS.
View 5 Replies View RelatedDoes anyone know if it is possible, or has done, a dual-boot setup of Win XP Pro and Win MCE (2005)? I'm curious to know if it is possible and if so, what is the best way to go about it and any potential problems.My current setup is I have a Athlon 64 3800+ with 1TB RAID 0 running Win XP Pro. I have partitioned the OS onto C: with 50GB and left the rest as general storage for the moment. I also have a digital TV tuner card, which is why I'm thinking of installing MCE.
View 3 Replies View RelatedI'm going to build a new computer. It will have a new 500 GB Seagate 7200.11 32 MB cache. I want to reuse my current 500 GB Samsung Spinpoint 7200 RPM 16 MB cache, which is currently used only for backup storage. What's the best way to have both XP and Vista on the new computer (which is also possible to do)?Vista on the new Seagate; XP on the the old Samsung (will all my files be wiped out during the installation?)The reverse of the above XP on 100GB partition on the new Seagate; Vista on the remaining 400GB; use the old Samsung as I have been all this time. XP will only be used to run Internet Explorer 6 and minimal web design tools.
View 1 Replies View RelatedHow do I establish a dual boot system? I am running WinXP on both drives.
View 12 Replies View RelatedMy work PC has 2 monitors, and my home PC has 1. When I connect to my work PC, I see only the primary monitor, which is what I want. I have a problem with a certain application though, it opens properly in the primary monitor, but has a dialog box that seems to be opening in the secondary monitor (I can't see it, but I am able "guess" my way around it with the keyboard). Is there any way to force everything onto the primary monitor?
View 6 Replies View RelatedI have two hard drives, both of them with Win 2000 Pro. The First has been the master in machine one from the start. The second HDD has been in machine twoand that machine has crashed so bad that it is not worth the time, energy or money to fix it. This second HDD has important data on it that is only accessable through older programs that are only on this drive. (It is a church membership data base program and a church financial record program) I have the added problem that no one in the office has a clue where the install disk are for these programs and they are not where they are suppose to be (this was before my time). I would like to place the second HDD in the first machine and set up a dual boot so the user can choose which drive to operate from. There is the added problem that the computers only have a restore disk that came from Dell and not a full Win 2000 Pro CD.
View 4 Replies View RelatedI have two monitors at home and at the office and both work fine at either place. But when I connect from home to the office via VPN, I can't get two monitors to work.
What do I need to do?
A week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
View 2 Replies View RelatedI have two WIN XP operating systems and use XP's inbuilt bootloader to switch between them. First drive is C: and the second is G:. Only C: drive is active This works OK but both drives are visible. Is this the correct setup?
View 5 Replies View RelatedI have a dual boot system setup. One each on it's own partition. I would like to delete 1 so it will free up the hard drive space for the other. How do I go about doing this. One OS is server 2000 and the other is server 2003.
View 14 Replies View Relatedhave dual monitors right side screen is blurred / red hues tower is a built one
win xp system did work prior hooked both monitors to an older tower = works fine
monitors are working fine problem seems to be in new tower
In the past, I have used the S-video port (with RCA adapter) in a dual view setup with my TV. I recently reinstalled Windows XP and now I can't get the secondary display (the TV) to work correctly. I just get a bunch of black & white lines moving up the screen (looks like bad reception/static on a TV). The weird thing is that the TV displays everything fine during the bootup process, including the loading screen with the Windows XP logo. Full color and everything. It's when Windows actually starts that the TV freaks out. Another weird thing is if I use nVidia's TV setup Wizard and select "Span," the image on the TV actually stabilizes. But I am forced to keep a low resolution on the monitor (which wasn't the case before I reinstalled XP), and as soon as I make any other changes the TV goes back to freaking out.
View 1 Replies View RelatedI have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies View RelatedI have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies View RelatedI'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
I started an upgrade for xp pro part way through the install I got a message "WatchDriverSigningPolicy.exe" no found I pressed enter then got another message "fake setup call himself instead original "setup.exe" ; setup abort!" now each time I reboot it starts to load xp then gives me the same message then press enter it then reboots.
View 3 Replies View RelatedI mistakenly launched XP Setup and want to know how to stop it from progressing further. I have another XP installed on another virtual disk. Rebooting from there allowed me delete the Setup files. Or so I thought ! The main XP installation however continues to try to launch Setup. Just about whatever I do, it ends in tears. My question is how do I stop XP on this disk from thinking it has to launch Setup? I dont want to reinstall XP, as that will involve a huge amount of work to recreate my environment.
View 6 Replies View RelatedI have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
I am running Windows XP and would really like to share the hard drive with another OS "Linux" and dual boot.
View 1 Replies View RelatedI was told to reinstall windows 2000 aon a C800 I was given. I stopped with an erroro reading line 3221166496 hivedef.inf corrupted. Setup cannot continue.
View 3 Replies View RelatedI have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
View 6 Replies View RelatedWhile playing a game I hit some buttons on accident and the display shrunk. Now the monsters are small, and so is everything else outside of the game I have no idea what I did, I checked the Screen Resolution and it seems fine, and I also checked my monitor settings, which is fine.
The monitor started showing graphic distortion. I ordered a new monitor but had the same distortion on it. I updated the ATI drivers but it did not solve the problem. In trying to trouble shoot the problem following directions on the ATI website, I changed all the graphic settings to the lowest and slowest available. This got rid of the distortion but the settings need to go! Now I cannot open the display settings.
View 3 Replies View RelatedMy XP is currently defaulted on it's display settings 640v by 480 pixels and will not allow me to change it. In fact, there is nothing to change it to. I dont know what file I must of deleted, but is there anyway I can download the driver or something to make it so that it can be set on opitions that are higher?
View 7 Replies View RelatedAll my text/font display settings seem to have changed. I downloaded a freeware program today called avi2dvd, to convert avi video files to iso files for burning to DVD. I tried it out, got frustrated with it, and uninstalled it. After I uninstalled it, I went to check my email. That's when I first noticed that all the text in my yahoo email account had changed - it seemed smaller, like it was at a lower resolution.
I clicked on a few more pages and it was the same for all of them - the text was just not as...smooth. Not as readable. And definitely smaller. It's not just a font size thing, I'm not that much of a newbie, I tried enlarging the font and it's definitely a resolution thing, not just a font or size issue. Then I tried out some other programs, and found out that the problem was system-wide. I use a writing program called Final Draft, and the text in that is also less readable.I found one program that hadn't been affected: IE all my web pages display fine in Explorer.
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again. I removed it again, using instructions from Systematic Antivirus and now it's really gone. Some of the settings were still weird though. So after hours of searching the help topics on Microsoft I managed to fix 1 & 1/2 of the problems I had/have.
For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab. (I have Windows XP Professional, by the way.) I can't click inside of the background list and it's shaded a sort of brownish beige color. I also can't browse and do anything with the position setting. I can however access the customize desktop and color features
i am trying to install windows office 2007 but after a minute from start of installation ,it popup dialog box saying setup can not find setup.exe file and say browse valid installation source and click ok.
I don't know whats happening.I have just formated my C drive and installed fresh copy of windows xp.
here is image of error message.
what should i do?
http://img101.imageshack.us/my.php?i...9005582dv8.jpg
I was installing security cables for the computer stations. when I finished and rebooted the computers(had to disconnect power and other cords to run the security cables) one of them had a display problem.
it seems that the display area has been reduced. the functional area of the screen is maybe 60% of what it should be. in this area it is complete with the full desktop able to be accessed and nothing is missing. but the right 20% of the screen is solid black (cursor stops at the boundary) and the bottom 20% of the screen(that's not black) is displaying a second image of the top 20% of my desktop. (cursor also stops at this boundary.)
