1. After the XP loading screen, the screen goes blank [but the computer is still working].
2. Safe Mode stops when it comes to mup.sys [I checked over the net how to fix this problem, but there occurs another one]
3. When I inserted the XP cd, it starts loading, it comes to the screen where I can choose between Fresh Copy of Windows, Repair and Exit, and both Fresh Copy and Repair freeze at "Examining ... of disk space"
Very similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
http://forums.techguy.org/windows-nt...oot-black.html
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery.
Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load:
AmdK8
Fips
nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
i have reinstalled xp home on my dell pc, but now the screen looks like it does when you use safe mode. also i cant connect to the internet.
View 10 Replies View Relatedi am working on this computer for a customer it has windows xp when you start it up you get the xp splash screen and that's it no user accounts just comes up to a black screen will not start to safe mode no last known good no safe mode with command prompt no safe mode with networking just keep getting black screen.
View 9 Replies View RelatedMy computer starts up and then continues in an ifinite restarting cycleWell, when I try to turn my computer on, it starts to load but then goes to a black screen saying some thing like:Your computer encountered a problem...it may have been bacuse of...or power failures...hard driveIt also says to click Safe Mode, Start Windows Normally or Same Configuration with a little timer at the bottomif I press enter for Start Normally or Same Config, it goes to a loading page and then shuts down and restarts going baack to the black screen. Restarting and Restarting and restarting
View 11 Replies View RelatedI've got some particularly nasty stuff on my system (running XP Home Edition), so I want to do a scan in Safe Mode. However, whenever I select safe mode, my screen tells me that the signal is out of range, and underneath that it says "35.5KHz / 87Hz". I have a Sony screen, in case that helps any. I looked around for solutions, but all I found were some fixes for when this happens on normal Windows, which involves going into Safe Mode. So no dice. I also tried VGA, but the picture is so horrible I have no idea what is on the screen.
View 7 Replies View RelatedRunning XP Pro and never had a problem. Since last night it has refused to boot. After doing the XP loading screen for normal time, it loads a black screen with the mouse, and nothing else. I've waited over fifteen minutes and it does nothing. After a few clicks, the error speaker beeps and the mouse freezes. Tried loading in safe mode, and it gives a black screen with all the safe mode text around the screen. Anyone had any experience with this?
View 14 Replies View RelatedUpdated my computer using automatic updates. I unfortunately didn't pay attention to the updates that were being installed. After a restart, I got the following error:
A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen sppears again, follow these steps: Check to be sure you have adequate disk space. If a drive is identified in the stop message, disable the driver of check the manufacturer for driver updates. Check with our hardware vendor for any BIOS updates. Disable any memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options, and then slect safe mode.
I tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
My dad has a Sony Vaio labtop that he bought from his friend at work with the operating system and all the software already installed. It has a single account named Owner that he clicks on which usually allows him to log-on, he never had a password. He clicks the icon, it appears to start logging on then suddendly it will say logging off, saving settings, then returns us back to the main log-on screen.I tried to start in safe mode by pressing F8 while the computer is intially turning on, but all the labtop does is make this loud beeping noise and starts up normally. No screen appears for me to select safe mode or anything.
View 8 Replies View Relatedit shows HP invent welcome screen, it shows safe mode option screen and then all black screen. Nothing after that Solution I tried already, please read it carefully before any reply1) Hard disk is working okay, I have tried hard disk with another PC and its working fine 2) I have tried to remove all hardware one by one that includes CD-ROM , DVD ROM , card reader, RAM memories, All PCI cards and floppy drive. But even after removal still showing same problem 3) Only thing which I havet tried is processor. Do you guys think I should try that one too. note : booting is from Hard drive and its booting okay in another computer
View 4 Replies View RelatedI'm using windows xp home sp2 and when ever I try to turn on the computer normally it comes up with a blue screen saying something about
C0000218
system32/config/default or log or replacement
It is corrupt
then resets the computer (the message is something along those lines) When I try booting into safe mode or safe mode with networking it scrolls txt down the screen then resets the computer. The only way I've got into it so far is with knoppix to backup what will fit of my gbs of files on to my laptop via a pen drive.
. I have a two year old dell dimension e310 desktop computer that has 'never' had a problem...until last night. After installing a game online for my son (from gametap) the game was running very slow and then just froze on the screen. I tried every way to shut the game off...couldn't...it was just stuck. I tried ctl-alt-delete expecting the task manager to appear....nothing... At that point I resorted to just shutting off the main switch. When I turned it back on a couple of minutes later it tried to start normally...then a blue screen comes up that says a 'problem has been detected and windows has been forced to shut down....etc'.. It read it and it instructed me to press f 8 and try to start in 'safe mode'
View 4 Replies View RelatedI am using XP. When I try to start my home computer, the main screen freezes and I can't do anything. On several tries the install screen came up, but not every time. The hour glass comes up and just stays there. Control/Alt/Delete doesn't do anything. I have to manually turn off the computer. I started it in the safe mode and ran Norton and anti spyware programs. They detected nothing. I can't go on AOL or explorer, even in the safe mode. I have a firewall and anti virus is up to date.
View 5 Replies View RelatedMy computer is running horribly slow and so I've tried to enter safe mode but I get a blue screen with instructions.It says to check to be sure you have adequate disk space. Says to disable the driver (causing problems) or check with manufacturer for driver updates or try changing video adapters.I cannot get into safe mode at all to run spybot (freezes when in regular mode).I had to type this from another computer.The technical information is:*** STOP: 0x0000007E (0xc0000005, 0x80537009, 0xF7A2B1B4, 0xF7A2AEB0)Thank you
View 3 Replies View RelatedI have a HP Pavilion ze4530us that is freezing on the startup. I have tried all option available on the Safe Mode screen, ex: Safe Mode, Last Known Good Config., Safe Mode with Networking. Whenever i choose one, it freezes on that screen and stays there. I was going to run a Windows repair
View 3 Replies View RelatedI booted up my computer 3 days ago and logged in under my user name, and there were no desktop icons or taskbar, so I restarted my computer and tried every user, still nothing. I went to msconfig to restore it to a earlier point, and when it restarted I went to my user name, and still nothing so I went to msconfig again and booted it up in safe mode, when it restarted, right before the user names screen came up, a black screen with "SAFE MODE" in all four corners pops up for about 3 or 4 seconds, then the user name screen comes up with the ADMIN and the rest of the user names, it doesn't matter what name I log in as it always goes to the same black Safe Mode screen as before but it will freeze there forever. So I had to manually shut it down. When it restarted I hit F8 to get it out of safe mode and chose restart computer normally, then when it restarts the same exact thing thing happens. I've tried every option at the F8 selection screen. So I put in a cd with Mepis Linux on it that my cousin gave me, but I didn't install it I have been running it off the disk. And I have no clue what to do next.
View 7 Replies View Relatedhad blue screen so re-started in safe mode and searched for suggested problem....MpFirewall.sys.......found 2 files.........removed them to recycle bin because didn't know what to do with them. Can i safely delete now and what else should I do?
View 14 Replies View RelatedI used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
View 12 Replies View RelatedI'm using Windows XP Professional. I am not able to log back into my Administrator account. I'm stuck in a limited user account and though my Administrator account is set w/o a password, I still can't login, even through my computer's Safe Mode which is was the Dell service person suggested
I was trying to eliminate the login screen from my computer's startup. Initially, I used a tip from Annoyances.org by entering "control userpasswords2" in the Run menu and turning off the "Users must enter a user name and password to use this computer" option
I have windows 2000. I turned it on and when I got to the desktop it was all weird. It has like three or four fuzzy split screens. I can get into safe mode and even ran the AVG to check for viruses. I didn't find any. I tried to get the computer to last known good configuration, but that didn't work
View 6 Replies View RelatedIn trying to get rid of some adware, I attempted to boot my computer (P4 2.8 GHz, 1.5 GB Ram, Windows XP SP2) in safe mode. When I selected "Safe Mode with Networking", I was brought to a blue screen called a "STOP ERROR SCREEN" - basically it said that it had to stop the booting up of the computer or the computer might be harmed. It suggested removing any recently installed hardware and disabling BIOS memory options such as caching or shadowing. So I rebooted and got into windows normally just fine.
Then I decided to try just regular Safe Mode (without networking) - when I selected that option, the computer started to do it, then rebooted and prompted me if I wanted to boot into Windows normally or safe mode, etc...I tried Safe Mode again - same thing, a reboot. I tried Safe Mode with Networking again - and I got the blue Stop Error Screen again.
This is pretty strange (at least I've never seen it) and I'd really like to be able to boot into safe mode.
The problem is on my buddies pc. It uses Windows XP Professional. I have it setup next to this pc I'm currently using. First I get this screen:
We apologize for the inconvenience, but Windows did not start successfully. A recent harware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight your choice.
Any choice I highlight brings this screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is indentified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with the hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0x80000003, 0xF8470005, 0xF894C4B4, 0xF894C1B0)
*** SCSIPORT.SYS - Address F8470005 base at F8460000, DateStamp 41107b4b
An app was installed, and right after, a BSOD came up with the following error message: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Technical information: *** STOP: 0x0000008E (0xC0000005, 0xBF803EF6, 0xF70917c4, 0x00000000) *** win32ksys - Address BF 803EF6 base at BF800000, DateStamp 43446a58 Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance......
I am having trouble booting up my laptop. It goes to the "windows" screen the a blue screen flashes for just a second and the only thing I can read is "a problem has occured" because of the short duration the screen is up...there is a lot more words on there but I don't have time to read it all. Then it goes to the option screen to restart or start in safe mode...which is what I'm in at this time.
View 14 Replies View RelatedMy computer has been acting screwy. While i have been playing a game my screen would freeze and black out, or just suddently black out.so i would have to shut it off through the back switch. this was happening for about a week. This problem happened again last night only this time it wont let me boot back into windows. it will boot up to the windows logo loading screen and restart, after this restart it will tell me windows did not boot properly and ask to continue with safe mode with networking, and console.(still rebooted with all choices) and windows normaly (rebooted) and windows with last safest configuration (still rebooted). occasionaly it will get to scandisk, after the scandisk it will lock up or reboot, if it gets passed scandisk without rebooting it gives me a blue screen
View 1 Replies View Relatedi had a computer which had a pretty bad visus on it. i think i got the virus out but now it wont start.I tried to do a repair of windows with what i thought was the disc for the pc, turns out it was a different xp version than the one on the pc.
So how i have the original corrupted windows, and the repair version of xp on the machine. Both of which will not even run.Its really important that i get the data of the pc, that was the whole point of what i am doing. the computer starts, then said it didnt load, i choose how i want to start the pc, safe mode...etc and then it freezes.Sometimes it just goes straight to a black screen, and i can no longer get it to boot from the windows disc.
I push the power button on the modem and it's fine... right after the screen does the Windows XP with the loading bar at the bottom screen it turns black and I even left it on for like 10 minutes and it still wont work. I also tried to start windows in SAFE MODE and LAST GOOD CONFIGURATION plus many others, but it wont work. I still have valuable information in the computer so,
View 2 Replies View Relatedmy laptop screen is broken and i added a monitor to startup on , only problem is it loads ok in safe mode and only goes to loading in normal mode and slows down cosiderably
View 13 Replies View RelatedI get a blue screen then it restarts in a loop, so I have tried to start in safe mode however this reads the hard drive then goes into a similar loop of getting a blue screen and restarting. I have the windows XP disk and code, but wondered whether by reinstalling windows all data would be lost? I would, if at all possible prefer to get the data from the hard-drive, is there any way to do this. Also, I am not entirely sure on how to re-install it anyway.
View 3 Replies View Related