At Repair Blue Screen Appears And The Process Starts
Mar 22, 2007
I was having some problems with windows xp media centre 2005 on my dell dimension 9150 so i decided to do a repair, i put in the xp cd and booted from it at start up, then the blue screen appears and the process starts, i then get the choice to install windows or repair using the recovery console, i chose install windows and then pressed r for repair on the os that was already there.It now has gone to the installation off the os where it installs the files and finalizes the process, it is getting to the third option where it installs devices but it is getting about three quarters of the way and then the driver box pops up saying that microsoft does not athorize the use of the driver would you like to continue but the thing is i cant, my mouse will not move on the screen so i am unable to click continue.
View 4 Replies
ADVERTISEMENT
Feb 6, 2009
A few weeks ago it started freezing and restarting randomly. Sometimes, on restarting, I would get the "Serious error" pop-up, which I always sent, and always got different results. Sometimes it would say it was an unknown driver error, sometimes an anti-virus error, once a RAM error. I had just upgraded the RAM when this started, so I ran the M$ testing tool several times, no errors. I also removed the new RAM, which didn't solve the problem, and put it back in
View 8 Replies
View Related
Aug 31, 2007
First i tried to boot from disk and then it told me that i dont even have a hard drive installed. I fixed this problem by pressing F6 when my windows cd was booting up and now it loads some RAID drivers off from a floppy disk i made up so that the HDD is there.
Just as some other posts have mentioned, i did not try the recovery console and went straight into setting up windows. When it asks me to choose a partition. I selected the one that i created when i built my computer (the one i have very valuable files on) and from there it gives me the "blue screen of death" or so my friend used to call it...the one that says the computer has been shut down to prevent damage to my computer.
Any ideas?
Also, with no other ideas i went into the recovery console... it asks something around "on what volume do you want to recover"...so i press the number 1 which is drive C then from there goes to the blue screen again.
Another thought i ran across is that the disk i am trying to use is a windows xp home and i set up my computer with xp pro....i seem to have lost the disk!!! Im hoping that's not the reason for the blue screen.
Thanks a lot!
View 11 Replies
View Related
Nov 24, 2007
I have given my sister my old Averatec laptop that has Windows XP on it. While she is using it, eventually a blue screen appears, which is the precursor to it restarting suddenly. It happens so fast that we cannot read what the blue screen says. After it starts back up, we get a microsoft report saying a serious error has occured. This might not help, but I'll list it just in case. The error signature is:Is this a virus? If so, is there any hope without reformatting? I accidentally uninstalled the program that contained the OS files when I first got the computer.
View 14 Replies
View Related
Sep 20, 2008
I've been getting an error/blue screen message when ever i start up my Acer Aspire 5650 laptop. It is a couple of years old now and,my last laptop died after about the same time so hopefully someone can shed some light.The system will start up and i can use the it with out any trouble but it is anoying to have to sit for up to 5 - 10 minutes while it runs the check every time.
View 6 Replies
View Related
Apr 2, 2005
As soon as it starts to run windows setup a blue screen appears and says:A problem has been detected and windows has been shut down to prevent damage to your computer.The problem seems to be caused by the following file setupdd.sys Page_fault_in_nonpaged_area This is the first time you have seen this stop error screen, restart you computer. If this screen appears again follow these steps. Check to make sure any new hardware or software is properly installed.
If problems continue, disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advance startup options, and then select safe modeTechnical Information: *** STOP: 0x00000050 (0xe1607088, 0x00000000, 0xfc44bf3e, ox00000001)
View 1 Replies
View Related
Sep 14, 2005
Every time i try to boot up my laptop i get a blue screen with the following...
*** STOP: 0x000000c5 (0x00000002, 0x00000001, 0x8053E059)
What does it mean, and how can i fix it?
View 1 Replies
View Related
Apr 12, 2008
I have got a HP Laptop that is about a year a half old, its top of the range. I had my laptop in Hibernate mode the other night and the next afternoon I went to turn it back on there was a blank screen for a long time, all the lights on the laptop were on but nothing on the screen. I turned the laptop off and then back on again. and BOOM! The blue screen of death!The computer starts up with the HP logo and then it pops up a screen saying that a previous attempt to start up had failed and it gave me options to start up in safe mode, safe mode with networking, safe mode with command prompt, start with the previous successfull start config, and normal start up. When i click ANY of these the windows logo pops up for about 3 seconds and then the blue screen, which appears for long enough for me to read 3 letters or numbers at a time. Then the computer restarts and we go through the whole process again. This is what I have done in the hope of fixing it.
I used my HP retore disks and it loaded disk 1 of 3 and it didnt ask for the other 2 disks which i thought was odd. But that made no differeance still the same start up process as explained above.The blue screen made mention of chkdsk and i read about some poeple on the net doing a chkdsk and it fixing similar problems. So i read that i needed a xp install disk to access the windows recovery console and type r. BUT i have a OEM installation so i have NO disks! So what i did was i got the XP Pro disk i have from a few years ago that i had on Desktop. BUT when it goes into recovery console it can not find any hard drives!
#Ive tried spinrite and it reads all the hard drives in the computer so i know that they are still there.
#I've tried to find some chkdsk bootable cd's but most are either floppy only or they only for FAT16/32 file systems, my file system is NTFS.I'am convinced from the research done that if I can run CHKDSK on the computer then it should fix the file error and then i can at least back up my data and then do a full format and start fresh again. But I have to be able to get this computer running.I just tried the "Last Known Good Configuration" selection and it says that the system32/config/SYSTEM file is missing.I would welcome any help, as I have exhausted all options that I can see available to me. From what I can see, the biggest problem is that im running a OEM version of windows. But then again the recovery console couldnt find the hard drives, so i dont know.
View 6 Replies
View Related
Mar 4, 2008
I installed a fresh copy of Windows XP sp2, and just now I've noticed that when I open a movie the blue screen appears.the screen contains the following error:"at the beginning"DRIVER_IRQL_NOT_LESS_OR_EQUAL (now this is the error)
View 7 Replies
View Related
Feb 23, 2008
My laptop keeps crashing and the dreaded blue screen appears. I've read similar threads on this forum and note that the exact text should be included in threads. So here goes - took me about 15mins to write it all down!A problem has been detected and windows has been shut down to prevent damage to your computer.
View 8 Replies
View Related
Oct 20, 2007
windows starts up normally, i just log on and do nothing at all, everything is normal for about an hour or so ,then BOOM, screen goes black and the system crashes with a nasty blue screen it clearly indicates a registry error, i've been told not to mangle with the registry, i have made a registry backup prior to upgrading to WMA 11 though.
View 7 Replies
View Related
Apr 10, 2007
What happens for me is I can't even start up my computer because i get the blue screen as windows starts up. I don't know if my hard drive is still going to work or not. Anybody know what to do?
View 3 Replies
View Related
Oct 4, 2006
My screen just went to blue and states that "Warning spywrae threat detected on your pc"
to protect your computer from spyware attacks click here"
And then a warning keeps popping up from the active process bar saying
"system needs neseccary installation of spyware"
When i close the pop-up this web site appears http://total-pc-protection.com/
View 8 Replies
View Related
Jan 27, 2006
I have been experiencing intermittent bootup problems with Windows XP. When this happens, the XP splash screen appears(blue line scrolling) and then monitor loses signal and reboot occurs. This can cycle several times, even if I choose the option of starting Windows with last known configuration that worked. It always eventually loads and reports that Windows experienced a serious problem.
View 5 Replies
View Related
Jun 13, 2008
When i turn it on I get the 'Windows did not restart properly screen'and no matter which of the options I choose, i see the windows logo loading after a short time the blue screen apears for a split second and then its back to the first screen all over again.
iv gone into BIOS, i ran the HD self test, and both the short and long test fail before really even doing anything.
View 1 Replies
View Related
Nov 12, 2006
im new I have a Toshiba Equium EA60-173 PSA67E-00700C8J.Im having often reoccuring problems almost as soon as i reboot my laptop freezes and a blue screen appears saying the ati2davg display driver is stuck in an infinate loop. and my laptop has to be rebooted, also it freezes and changes to the lowest display settings and a window appears saying the display driver it has stopped working properly. I need advise on how to sort this as its very annoying, my laptop also over heats, gets very hot and just turns itself off. the fan constantly runs.
View 27 Replies
View Related
Oct 9, 2009
When ever I put my flash drive in USB port, my computer shuts down and a blue screen appears, and in that blue screen it says that for protection of computer will be shut down in so and so minute, but when I use the same drive at work I have no problem with the drive neither with computer, Is there anything wrong with my computer?
View 1 Replies
View Related
Mar 20, 2009
PC running XP media edt. Once turned on I get The following file is missing or corrupt
windowssystem32configsystem.This happens even in safe mode. Then tried to do a repair with the system discs as soon a s I get to the recovery console ans type the Windows version to repair I get the dreaded blue screen with message Stop error 0x00000043 0XC35C6000 0X00000000 0X00000000. So I can't boot into windows nor do a repair. I@ve tested the memory.
View 7 Replies
View Related
Oct 18, 2006
I have Windows XP Pro SP2 installed and I messed it up.I tried doing loads of stuff and I had to repair the master boot record and boot.ini file.Then when I booted on xp, the blue screen appared.I checked my hardware and did loads of tests but didn't find much problems and I if I did, I didn't understand them.For example I had test problems with my parallel ports and serial ports and the System Stress Test failed in RAM Memory.Anyway, I desided to use the repair installation on my CD Windows XP Pro SP1. But each time it arrived at "installing hardware", it failed and just stoped. tried a few times but it kept stoping. And now the repair doesn't even start... all I see is the mouse.
View 4 Replies
View Related
Dec 22, 2004
I have an XP Pro computer with SP1a. The computer started resetting itself after a blue STOP screen that flashed on for a fraction of a second shortly after the XP Professional startup screen. Since I couldn't persuade it to go into safe mode (or any mode), I tried a repair from installation CD. After about 20 minutes in the Installing Drivers section of the install it gives a STOP error saying that the CDR4_XP.SYS driver may be corrupt, and the error Page Fault in Nonpaged Area. It then does a memory dump and restarts with a Chkdsk and resumes installing drivers again. After a further 20 minutes the whole saga repeats itself. I have gone into the recovery console and get a warning message System Registry does not appear to have an active ControlSet key. I can then put in the Admin password and get into the console.
View 4 Replies
View Related
Jun 8, 2010
pop up saying that avg needed to update, it gave me the option to postpone it so i did; it told me it would be done when the computer was shut down.
today monday, i turned the computer on and all i had was a blue screen...the only way to access the computer was through the debugger mode, after several things I decided to repair my windows xp... and foolishly did not make backups of my data. During the XP repair the intallation was not completed when a new blue screened popped up saying a different message.BAD POOL CALLER and STOP: 0x000000c2 (0x00000007, 0x00000cd4,0x00340045,0xe1d4de7c)
View 4 Replies
View Related
Jun 4, 2005
my computer was recently infected with a Trojan which i seem to have gotten rid of. Today when i opened the task manager it only seems to partially load. It will bring up the process list with the "End Process" button, but that is it. The other tabs and pull down menus are gone. The Task in the taskbar has the icon for it but doesn't have any words next to it
View 1 Replies
View Related
Nov 22, 2008
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
View 7 Replies
View Related
Mar 12, 2010
I recently installed a program to block my internet at night so I can get back in to a normal routine. The only problem is I can simpley go in to task manager and end process and repair connection and i can do what I want again. I want to stop me from using computer at night so i can get in to a good happier routine. In order to stop me acessing program i passworded it with password i could not remember off top of my head, tried to make it as random as possible. but because i can just go in process and end it... its kinda pointless.
I left it so I can uninstall it because well there maybe a valid reason why I need to uninstall it sometime... and i know better then to never leave one safe clause. I know I wont uninstall it tho but because its so easy to just go to processes and end it... its just to easy. So I wanted away in which I can block processes from been closed or hide it so I can't close it like that.
View 9 Replies
View Related
Sep 10, 2006
Ok, using this help website, http://xphelpandsupport.mvps.org/how...air_a_stop.htm I am at the harder method, but encountered some problems.md tmp(nothing really happened not sure if anything was supposed to) copy c:windowssystem32configsystem c:window mpsystem.bak (copied fine) copy c:windowssystem32config software c:windowmpsoftware.bak (it says the file can not be copied). Do I go on with the rest of the tutorial, or where exactly do I go from here? Is there any possibility that I will not have to reformat and get my old computer back?
View 6 Replies
View Related
Nov 10, 2006
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
View 4 Replies
View Related
Oct 16, 2010
The word Webcam appears on my screen then my browser(Chrome) starts and loads tab after tab of a webpage for Logitech webcams. Taps continue to load until chrome crashes. Only then can I regain control of Chrome and the computer. I've tried all the usual antispy tools but nothing finds what is causing this. I do have a wireless logitech keyboard and mouse.
View 4 Replies
View Related
Nov 1, 2009
My wife brought home a computer from work that was no longer needed. Everything started normally, ran well, but then after updating windows the log on screen appears and now needs a password. Any ideas?
View 3 Replies
View Related
Jan 14, 2009
XP Professional has been running fine for years and now it won't shut down, it hangs at the screen. The only way to turn it off is with the power button. I tried to do a restore but when it gets to the point of restart the system won't shut down and the restore fails. I have McAfee installed and have scanned three times with no problems found.
View 2 Replies
View Related
Oct 1, 2008
Recently XP Pro has been taking ages to boot up. The system post screens come up and the windows loading bar shows no problem but then before the windows welcome screen appears followed by the desktop i get a black screen for approx 30 - 60 seconds.Once the desktop has finally loaded the pc works absolutely as normal I have not installed any new hardware or software recently.I cannot hear any drive activity during the black screen
View 6 Replies
View Related
Jan 20, 2007
every time i finish playing a game and exit out of it to return to windows. all i get is a black screen with my mouse curser, everything is still there i just carnt see anything. to fix this everytime i just push the windows button on the universal remote to media center, it starts up i exit out of it then everything is normal. just a little anoying having to do this after every game i play.
View 1 Replies
View Related
