Can't Even Start Up Computer / Get Blue Screen As Windows Starts Up
Apr 10, 2007
What happens for me is I can't even start up my computer because i get the blue screen as windows starts up. I don't know if my hard drive is still going to work or not. Anybody know what to do?
View 3 Replies
ADVERTISEMENT
Oct 20, 2007
windows starts up normally, i just log on and do nothing at all, everything is normal for about an hour or so ,then BOOM, screen goes black and the system crashes with a nasty blue screen it clearly indicates a registry error, i've been told not to mangle with the registry, i have made a registry backup prior to upgrading to WMA 11 though.
View 7 Replies
View Related
Jun 20, 2008
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies
View Related
Oct 23, 2005
I was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
View 2 Replies
View Related
Jan 17, 2006
i left my comp on to download last night but when I got up I received the message below and i always receive it now when i restart/reboot. i'm a computer noob so i don't know much about comps so can you please help me out and i tried reading about it on the microsoft site but still no closer to fixing the problem.
View 12 Replies
View Related
Jul 23, 2007
I've recently built a new computer and it works amazingly except for the fact I get a blue screen once in a while I start up my computer. I tried to find a way to take a picture or something for the blue screen but it restarts a second after the blue screen appears. I couldn't get much information on the bluew screen but I remeber it said something like "no_page_setup" or something similiar. If I don't get the blue screen, sometimes my computer just freezes on me
View 14 Replies
View Related
Sep 16, 2005
A while back I tried to reload the entire WinXP and start from scratch due to some viruses and what not. Before I could complete the process, I decided to try to fix the problems one last time. It Worked. Now when I turn the computer on It automatically directs me to a blue windows setup screen. In order to start WinXP I must manually select windows in the three second time limit.How do I get my computer to automatically start windows at start up?
View 7 Replies
View Related
Sep 20, 2008
I've been getting an error/blue screen message when ever i start up my Acer Aspire 5650 laptop. It is a couple of years old now and,my last laptop died after about the same time so hopefully someone can shed some light.The system will start up and i can use the it with out any trouble but it is anoying to have to sit for up to 5 - 10 minutes while it runs the check every time.
View 6 Replies
View Related
Mar 22, 2007
I was having some problems with windows xp media centre 2005 on my dell dimension 9150 so i decided to do a repair, i put in the xp cd and booted from it at start up, then the blue screen appears and the process starts, i then get the choice to install windows or repair using the recovery console, i chose install windows and then pressed r for repair on the os that was already there.It now has gone to the installation off the os where it installs the files and finalizes the process, it is getting to the third option where it installs devices but it is getting about three quarters of the way and then the driver box pops up saying that microsoft does not athorize the use of the driver would you like to continue but the thing is i cant, my mouse will not move on the screen so i am unable to click continue.
View 4 Replies
View Related
Feb 18, 2010
I have recently reformatted my aspire one with windows xp home edition from a USB bootable flash drive. Everything went well as expected except for one thing.When I turn on my computer, the acer logo appears then a page appears again which asks me to choose whether to start windows xp or repair it using USB. I have to always click the start windows xp before the windows logo appears and everyhting in windows is alright. I dont know how to fix this so that after the acer logo appears, windows logo comes next then desktop.
View 9 Replies
View Related
May 17, 2007
I have a friend who is using windows xp.When they boot the computer up.They encounter a black screen with some wording.He tells me that the wording is to do with ms dos.Then the screen goes black,with just the cusor showing in the top hand left corner.
I have an idea of what the problem is,and think that someone has gone into his settings and asked the machine to boot up in dos.
View 1 Replies
View Related
Nov 4, 2008
I have Microsoft Windows XP and once I turn it on it appears as it is restarting but as soon as it starts up after the black screen that says Microsoft Windows XP the screen goes black and says monitor going to sleep and then it restarts over and over and over!
View 5 Replies
View Related
Sep 12, 2007
Just switched of pc,Switched it back on and I get a page with,safe mode etc and to choose a setting.Which ever setting I pick the computer goes to the widows xp window then goes back to the black screen then to the xp startup screen again.It does this all the time.It was all working well until switching off.I am on laptop now as unable to access pc.
View 2 Replies
View Related
Dec 13, 2007
Computer starts, Gets to Windows XP loading screen then restarts, and does this forever.I tried booting in every mode, Safe mode with networking with bios?Last known settings None boot Windows, all do the same thing.I reset bios battery, didn't help.I'm hoping I don't have to reformat as my 27 page coursework is on there and if i lose that im gonna cry.
View 14 Replies
View Related
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Nov 18, 2007
XP won't get beyond a 'blue screen' since I attempted to update the IDE ATA / ATAPI Controller drivers. The update went as planned, until I selected the best version. XP then restarted my computer and a 'blue screen' appears refering to 'atapi.sys' as being the problem.I can't get XP started in any form of Safe Mode by accessing 'F8' during startup. The only part accessible is the Bios.
View 10 Replies
View Related
Feb 14, 2010
I have a Gateway 450SX4,Ser.#0027460659.Desktop on Windows XP. I tried starting it in Windows Normally,and safe mode.All that comes up is a blue screen that says,STOP:c0000218{Registry File Failure} the registry cannot load the hive (file):systemrootsystem32Configsoftware or it's log or alternate.It is corrupt, absent or not writable.Begging dump of physical memory physical memory dump complete.
View 14 Replies
View Related
Oct 7, 2009
I've got an IBM R52 Laptop it's running Windows XP and is a few years old. Just the last couple of days I've been having trouble getting it to start - I get the Blue Screen and when I finally do get it going the System Error message. There are several such ERROR Events which say the source is Dhcp there are also some Event 57 ftdisk.If anybody has any ideas about what I may have done to create this problem, please respond. The only thing I can remember changing in the past few days is starting to use a USB headset. I noticed this afternoon that when I unplugged the headset instead of going to the Blue Screen again - the computer went forward as usual.
View 7 Replies
View Related
Jul 30, 2008
so when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies
View Related
Apr 28, 2007
Almost every time when I shut down my computer from windows I get a blue screen for a less than a second and than my machine restarts.After that on the log on windows after pressing shut down button I manage to shut it down.This issue is from a long time.
But recently I have problems starting my PC.It is unable to start windows.I tried to restart it many times.Same result.Finaly after starting in safe mode which was also dificult (many tries) the Windows started normaly.What could I do stoping this and I 'd like to find out what is causing my PC problems?In my system event viewer the latest error is "system error" event 1003 with these parameters.
View 3 Replies
View Related
Mar 18, 2006
I can't get pass the windows logo. I can't boot into safe mode, can't boot into last knowm configuration or boot to a crompt. I don't have a recovery disc. Can anybody help?
View 14 Replies
View Related
May 16, 2007
My Dad is running Windows XP Media Centre edition and intermittently gets a blue screen of death during start up (see attached photo).
View 1 Replies
View Related
Sep 26, 2010
i am using a toshiba satellite with windows xp sp3. I got a blue screen and my laptop crashed right away. When i restart my laptop the start up took very long. Im not sure what i did. But i remember changing my antivirus from eset to panda then to eset again. Putting back eset didnt solve the very slow start up so i decided to unsinstall it again and now i dont know what to do. please help. i dont know if i got a virus or what.
View 14 Replies
View Related
Nov 9, 2007
Computer started running slow and then locked up for no reason. Upon trying to reboot, I got a boot disk error, then a ntldr error. After running my setup disks I get the blue screen Stop: 0x0000007f ( 0x00000)unexpected_kernel_mode_trap.
View 6 Replies
View Related
Oct 9, 2008
Can I start a bit vague here as I know nothing about computers.I have a Mesh computer running Windows XP. I upgraded to Vista but ended up with a reformat and reinstalling XP clean and the computer was running fine. For no reason at all (ie no changes were made), Windows suddenly wouldn't load and I got a blue screen with KERNEL-DATA-INPAGE-ERROR (or similar).There was a bit of a delay as I took out the stock Seagate Barracuda 250Gb SATA and couldn't get hold of a replacement so replaced it with a Samsung Spinpoint F1 750Gb which it wouldn't auto-detect for love nor money. My neighbour claims my RAM is OK and the Samsung detected OK in his machine.I therefore took out the Samsung and bought a new Seagate Barracuda 320GB SATA drive and fitted that. The BIOS auto-detected it and I tried to install Windows. It allowed me to create a partition but then proclaimed it couldn't format the disk. I then got a blue screen with PAGE-FAULT-IN-NONPAGED-AREA which variously blamed the partmgr.sys file and the setupdd.sys file.
When you press Enter to continue it says <Setup disk not recognised> or something like that. Sorry to be vague but I'm having to try and remember this in work.Now because the machine has had problems with two hard drives, I'm fairly sure it's not the HDD itself but much beyond that, I'm completely lost.MESH support haven't really been much help and have recently sent me a BIOS update file which I am lothe to use because I'll probably screw the whole thing up and I think I need to resolve the problem before adding any variables...or maybe just buy a new computer.Any pointers would be good. I have no technical knowledge I'm afraid and obviously no access to the internet from the machine itself. I have no boot disk either.
View 7 Replies
View Related
Jul 21, 2005
I just bought a brand new Western Digital 120g Hard Drive. I am trying to put it together with some other spare parts to make a computer. The mother board isnt too old, it a 1.2 gig pentium 3 I believe. When ever I first installed the hard drive, I tried to install windows. When ever windows is finished setting up, the computer restarts, windows starts to load, and then I get that awfull blue screen that reads "Unmountable_Boot_Volume" blah blah blah. I can get it into safe mode, but that is it. I have tried everything on this newsgroup, from loading the service pack, changing things around in the bios, chkdsk /r, chkdsk /p, fixboot c:, and a couple of other things. I also tried the lifeguard disk that came with the hard drive.
View 7 Replies
View Related
Jul 15, 2005
For some time now a computer that I have has been constantly restarting, freezing or I had a look at it and he can't see any problems. suggested re-installing windows so I tried that, low and behold enter the Blue Screen, It has an error message
USBPORT.SYS - Address F83DB50D
View 2 Replies
View Related
Sep 18, 2008
I tried to install windows xp professional. When it is installing the os in the blue screen. A pop up says. I tried to reinstall my windows xp because it couldnt boot up because it say that my drv.sbd got corrupted or missing file so i try to reinstall the os but problem popped up.The file AFw.Sys (unknown) is needed and they ask me to browse it for the path file but i cant find it nowhere. And then it says The exception unknown software exception (0XC0000409) occurred in the application at location 0X6976Ea96
View 2 Replies
View Related
Feb 7, 2010
The computer would load with large icons and large screen. after that the windows security alert comes up. RIght now its doing a total system scan. It says 156 total objects infected. If i purchase the malwarebytes anti malware will that fix the security alert along with the blue screen error? Thank you guys in advance... o .. and i have read the other posts that is why im running the malware.. but if i need to know anything else
View 4 Replies
View Related
Jul 7, 2010
Using XP Home. Have Professional to try too which hasn't worked. OK, so about a month ago, I started getting BSOD, more and more regularly, until my computer wont start. So naturally, I try and reformat and reinstall. BSOD. So, I took it apart, put it back together, tried to reinstall, BSOD.
View 2 Replies
View Related
May 27, 2007
This morning it tells me it has recovered from a serious error, but after about 5 minutes of seemingly normal usage, it briefly flashed some kind of blue screen error (no way in hell I could read it)Now it is constantly asking for a chkdsk, I let it run and all appears OK... but when I get to the login screen the display starts to look weird like there are lines running through it, and it promptly flashes the same blue screeen and starts all over again.
I have been able to briefly get into safe mode, tried a system restore but when I went to reboot the processes started all over again. PLEASE NOTE that getting into safe mode takes some patience.... it hangs FOREVER when loading the agpCPQ.sys driver, and sometimes just goes ahead and reboots on it's own.. TWICE so far today I have managed to get into safe mode, but only for a few minutes before it reboots and starts over.
View 14 Replies
View Related