Almost every time when I shut down my computer from windows I get a blue screen for a less than a second and than my machine restarts.After that on the log on windows after pressing shut down button I manage to shut it down.This issue is from a long time.
But recently I have problems starting my PC.It is unable to start windows.I tried to restart it many times.Same result.Finaly after starting in safe mode which was also dificult (many tries) the Windows started normaly.What could I do stoping this and I 'd like to find out what is causing my PC problems?In my system event viewer the latest error is "system error" event 1003 with these parameters.
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
The computer would load with large icons and large screen. after that the windows security alert comes up. RIght now its doing a total system scan. It says 156 total objects infected. If i purchase the malwarebytes anti malware will that fix the security alert along with the blue screen error? Thank you guys in advance... o .. and i have read the other posts that is why im running the malware.. but if i need to know anything else
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this? Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose. Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
so when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
For some time now a computer that I have has been constantly restarting, freezing or I had a look at it and he can't see any problems. suggested re-installing windows so I tried that, low and behold enter the Blue Screen, It has an error message USBPORT.SYS - Address F83DB50D
I tried to install windows xp professional. When it is installing the os in the blue screen. A pop up says. I tried to reinstall my windows xp because it couldnt boot up because it say that my drv.sbd got corrupted or missing file so i try to reinstall the os but problem popped up.The file AFw.Sys (unknown) is needed and they ask me to browse it for the path file but i cant find it nowhere. And then it says The exception unknown software exception (0XC0000409) occurred in the application at location 0X6976Ea96
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows: Kernel-Data-inpage-error stop error screen then there are a lot of numbers etc. I have sometimes noticed a slight change in fan noise prior to freeze (speeding up) After reebot everything's back to normal.........
windows starts up normally, i just log on and do nothing at all, everything is normal for about an hour or so ,then BOOM, screen goes black and the system crashes with a nasty blue screen it clearly indicates a registry error, i've been told not to mangle with the registry, i have made a registry backup prior to upgrading to WMA 11 though.
Using XP Home. Have Professional to try too which hasn't worked. OK, so about a month ago, I started getting BSOD, more and more regularly, until my computer wont start. So naturally, I try and reformat and reinstall. BSOD. So, I took it apart, put it back together, tried to reinstall, BSOD.
This morning it tells me it has recovered from a serious error, but after about 5 minutes of seemingly normal usage, it briefly flashed some kind of blue screen error (no way in hell I could read it)Now it is constantly asking for a chkdsk, I let it run and all appears OK... but when I get to the login screen the display starts to look weird like there are lines running through it, and it promptly flashes the same blue screeen and starts all over again.
I have been able to briefly get into safe mode, tried a system restore but when I went to reboot the processes started all over again. PLEASE NOTE that getting into safe mode takes some patience.... it hangs FOREVER when loading the agpCPQ.sys driver, and sometimes just goes ahead and reboots on it's own.. TWICE so far today I have managed to get into safe mode, but only for a few minutes before it reboots and starts over.
when i get my Dell Inspiron E1705 to boot from my windows xp cd it goes through the screen where xp is trying install all the raid drivers etc.. before i can actually access my two hard drives delete them and create a new partion. right when its about to get to that screen i get the blue screen of death. well i have been reading around i read that going into my bios and changing my hard drive config to sata auto detect will fix my problem.
well i went into my bios and i do not have any sort of options when it comes to my system to hard drive configuration so im assuming if i do not have this feature or option that i have a IDE hard drive not sata. so if this is my situation how do i get my computer to stop going to the blue screen of death before i get to the screen where i can delete my partion
A while back I tried to reload the entire WinXP and start from scratch due to some viruses and what not. Before I could complete the process, I decided to try to fix the problems one last time. It Worked. Now when I turn the computer on It automatically directs me to a blue windows setup screen. In order to start WinXP I must manually select windows in the three second time limit.How do I get my computer to automatically start windows at start up?
I am facing problem is starting my laptop.I get a blue screen saying windows have been shut down to avoid damage.And then it says 'UNMOUNTABLE_BOOT_VOLUME'and says this is caused due to new software or hardware installed. I have not installed any such application/software or hardware. So I dont know whats causing this problem.Can someone please help me at the earliest I am stuck badly.I need to work from home but my laptop is not working.
Recently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
I am running Windows XP Home Edition, and I have recently been having frequent crash errors. Everything seems to be running fine and suddenly the screen goes blue and a long message shows that said that the computer is shutting down to prevent a crash.
Have a new HP laptop which had Windows 7 pre-installed. I couldn't get on with it so I tried installing XP but all I got was the "Blue Screen of Death" telling me that Windows had detected an error and had shut down. I tried again with the same result so I tried installing Linux (Ubuntu). This went on fine and so I tried XP again. Still the blue screen of death. XP will not install and I would be grateful for any help anyone can give to an oldie.
When I plug my USB interfaced memory card, I can easily access it through my .NET program but when I connect another memory card with USB interface my system immediately crashes with blue screen of death.What can be the reason(s) and also how to get read of these problem?
I have a Prolink Hurricane 9601C Modem. It has two LED's indicating Power and Link. As of recently, the Link LED, starts to flash on and off, and all network connections get terminated. The Driver software of the Modem stops responding. I tried to unplug the network cable and re attaching it, but nothing happens.... The System will not shutdown either. Once windows logs off, I get this Blue Screen Error.A problem has been detected and windows has been shut down to prevent damage to your computer.
For the last three days I have been getting a blue screen error, the only thing I have done is ran Softwar inspector Secuna, and uninstalled Abobe Reader and reinstalled the updated version.Error message: A problem has been detectd and Windows has been shut down to prevent damage to your computer.KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error Screen, restart your computer. If this screen apperas again floow these steps. Check to make sure any new hardware or software is properly installed. If this is a new install ask your hardware or software manufactor for any windows updates you might need. If the problem continues, disable or remove any new installed hardware or software. Disable BIOS memory options such as coaching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer. Press F8 to select Advanced Start up Options, and then select Safe Mode.
I am running XP media center 2005 and it is a pretty fresh install. All of a sudden today I am having crashes and the one blue screen I got had this code on it - STOP: 0X0000008E(0XC000005, 0X805AE8AC, 0XA55DEBDC,0X00000000)
I've recently put together a PC and for the first 3 weeks it was running perfectly. Then in the past week, it started crashing completely randomly it seems. No error messages or blue screens, it just auto restarts. On reboot, it has an error log (the following are 5 examples out of about 10 crashes so far) Ex 1 Error code 1000008e, parameter1 c0000005, parameter2 c0384dc0, parameter3 ebf4e4ec, parameter4 00000000. (This occurred when I was finishing an installation of iTunes..don't know if that's of significance?) Ex 2 Error code 1000008e, parameter1 c0000005, parameter2 c038d724, parameter3 ecb494ec, parameter4 00000000. Ex 3 Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec2dc4e4, parameter4 00000000. Ex 4 Error code 1000008e, parameter1 c0000005, parameter2 c038c2f4, parameter3 ec94189c, parameter4 00000000. Ex 5 Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec4da4e4, parameter4 00000000. I've not installed any new hardware in the last week nor any major programs. I've got no spyware (according to spybot). Norton windoctor reported a missing msvcr80.dll (i realise i can't just add this .dll back into my system...plus I'm told it's a necessary .dll for office 2007 and .NET 2.0) Any idea what my problems could be?? PS: the attached jpegs shows the errors windoctor comes up with