Blue Screen While Installing Windows Xp: Changed HDD Config?
Sep 7, 2008
when i get my Dell Inspiron E1705 to boot from my windows xp cd it goes through the screen where xp is trying install all the raid drivers etc.. before i can actually access my two hard drives delete them and create a new partion. right when its about to get to that screen i get the blue screen of death. well i have been reading around i read that going into my bios and changing my hard drive config to sata auto detect will fix my problem.
well i went into my bios and i do not have any sort of options when it comes to my system to hard drive configuration so im assuming if i do not have this feature or option that i have a IDE hard drive not sata. so if this is my situation how do i get my computer to stop going to the blue screen of death before i get to the screen where i can delete my partion
View 3 Replies
ADVERTISEMENT
Jul 15, 2005
For some time now a computer that I have has been constantly restarting, freezing or I had a look at it and he can't see any problems. suggested re-installing windows so I tried that, low and behold enter the Blue Screen, It has an error message
USBPORT.SYS - Address F83DB50D
View 2 Replies
View Related
Apr 23, 2010
Have a new HP laptop which had Windows 7 pre-installed. I couldn't get on with it so I tried installing XP but all I got was the "Blue Screen of Death" telling me that Windows had detected an error and had shut down. I tried again with the same result so I tried installing Linux (Ubuntu). This went on fine and so I tried XP again. Still the blue screen of death. XP will not install and I would be grateful for any help anyone can give to an oldie.
View 14 Replies
View Related
Feb 14, 2007
Im am getting STOP - c0000218 Registry file falure the registry cannon load the hive. systemroot/system32/config/security or its log or alternative. It is corrupt, absent , or not writeable. but whatever I do it I end up with the blue page with the eror message on it. I went into the bios setings and made sure that it could be bootable with cd but all in vain.
View 6 Replies
View Related
Jan 18, 2008
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
View 1 Replies
View Related
Feb 22, 2005
Installing w2k. As soon as the machine is to the point of installing the system when you hit return you get stop 0x00000023 (0x00e00c8,0xbfcf5128,0xbfcf4d80,0x80422bbd) address 80411bbd base at 80400000 datastop 3d363A77 -ntoskrnl.exe System is new motherboard, harddrive has been freshly formatted to fat 32. The system will boot to a 98 floppy start up and write files to the hard drive.
View 7 Replies
View Related
Nov 5, 2006
I installed PC Cillin 2007 on my laptop today. After the program installed, it restarted the computer and came back to a blue screen. STOP: OX0000008E (0XC0000005, 0XF8B0B1B2, 0XF2D89C9C, 0X00000000)windrvNT.sys - Address F8B0B1B2 base at F8B06000, DateStamp 409f405c I restarted in Safe Mode but the computer will not let me uninstall PC Cillin using the Add/Remove Program option or the uninstall option in PC Cillins folder. Can somebody help me uninstall the program? Thanks.
View 11 Replies
View Related
Apr 23, 2010
Session3_initialization_failed blue screen when installing win xp
View 1 Replies
View Related
Jan 12, 2009
I'm trying to install Windows XP (old install CD for sure) on a new system. When the install is checking my system configuration, I get the blue death screen (a problem has been detected... STOP... addresses... etc.).My Windows XP disk is original and in good condition. The hard disk is recognized and blank. The motherboard is a Gigabyte EP45-UD3P.Here's the error if it makes sense to anybody:"A problem has been detected and Windows has been shut down to prevent damage to your computer.STOP 0x0000005 0xF786A0BF 0xF7CB6208 0xF7CB5F0 pci.sys Address F786A0BF bas at F7863000, Datestamp 3b7d855c"
View 2 Replies
View Related
Dec 31, 2009
I have a Dell Dimension 3000 running XP Professional. I have an 80G HD and 2GB RAM. I have downloaded and attempted to install Mediaplayer11.On the reboot I get the dreaded blue screen with the error 0X00000019 (0X00000020, 0X8A3400270, 0X8a34002A0, 0X1A060006) I then have to go to the safe mode and do a system restore
View 5 Replies
View Related
Apr 26, 2006
I have just installed a nvidia driver (84.21) to replace the version (77.77) I've successfully been running for several months now. Both are certified as compat with my 6800gt card. I seem to be able to instal it OK, files are copied across, the screen resets, the new driver is listed as installed uder the device manager and I get a message saying the new hardware has succesfully installed and I need to restart to finish installation.
When I do, i go through the usual boot through to the windows start up screen (with flag), then I get a blue secreen with "please wait....." after 5 secs the dots stop appearing, then within 30 secs the HD stops. The keyboard etc is frozen. I gave it 5 mins then reverted to last good config, and tried again deleting all previous nvidia drivers, but still get the same result. I also tried a different driver (83. something) and still the same. I had norton disabled during installation
View 3 Replies
View Related
Dec 27, 2008
After installing disney pix video editing software on my laptop, a blue screen appears saying "A problem has been detected and windows has been shut down to prevent damage to your computer." I tried to reboot in safe mode and unistall the software but it will not allow me. There is also an icon that pops up stating found new hardware DB CIF Cam. How can I resolve this problem?
View 1 Replies
View Related
Jun 19, 2010
i am getting an blue screen technical error while installing windows xp
View 1 Replies
View Related
Sep 23, 2008
Now, I wanted to install and image the Windows XP Proffessional of mine. It should've worked, but for some reason, it's giving me a blue screen error right when the Loading Windows part of setup starts. This blue screen error mentions pci.sys.Now I've installed that Windows XP Proffessional on about 5 machines before, and it's always worked for me (I believe it was 5 or so). Anyway, I've never needed to install it on this machine before until now, because it's more convienient to install it here. Note that it's not running on any other machine or anything, I haven't needed it installed on a machine for awhile.
Well, here's what I've been trying. According to several Internet sites, I might need to install additional drivers by creating a custom disk with nLite. I've indeed now created 1 DVD, and about 2 CDs, with different drivers and can't seem to find the right driver that needs sticking on there, because people seem to say different parts may be missing.If this makes any difference, I know that both my Home Edition and my Media Center Edition have Service Pack 2 on it when all I do is install the Windows. This CD of Windows XP Proffessional does not. It only has Service Pack 1 installed when you just install Windows with the disk.
View 7 Replies
View Related
Jun 20, 2008
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies
View Related
Apr 2, 2005
As soon as it starts to run windows setup a blue screen appears and says:A problem has been detected and windows has been shut down to prevent damage to your computer.The problem seems to be caused by the following file setupdd.sys Page_fault_in_nonpaged_area This is the first time you have seen this stop error screen, restart you computer. If this screen appears again follow these steps. Check to make sure any new hardware or software is properly installed.
If problems continue, disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advance startup options, and then select safe modeTechnical Information: *** STOP: 0x00000050 (0xe1607088, 0x00000000, 0xfc44bf3e, ox00000001)
View 1 Replies
View Related
Oct 27, 2009
I have a Sony Vio model PCG-3E2L. I tried installing xp on my sony computer that had vista on it. It continually blue screened during the very beginning of the install process. So, I decided to remove vista. I could not get vista to uninstall so I finally ran an older bootable windows like 98 or me which got me to dos. In dos I deleted and reset partitions. I did not format as format was not on the disk I used. Now, with a fresh hard drive I figured that xp would install but it won't. The computer boots by cd but again it continually blue screens at the beginning of the install process b/f it asks any questions but after loading drivers.
View 3 Replies
View Related
Jun 8, 2010
pop up saying that avg needed to update, it gave me the option to postpone it so i did; it told me it would be done when the computer was shut down.
today monday, i turned the computer on and all i had was a blue screen...the only way to access the computer was through the debugger mode, after several things I decided to repair my windows xp... and foolishly did not make backups of my data. During the XP repair the intallation was not completed when a new blue screened popped up saying a different message.BAD POOL CALLER and STOP: 0x000000c2 (0x00000007, 0x00000cd4,0x00340045,0xe1d4de7c)
View 4 Replies
View Related
Sep 20, 2008
Please help me with installing Windows XP on Dell T7400 with H/W RAID controller on 4 15k SAS harddrives. When installing windows I hit F6 to add optional RAID drivers and load this drivers using floppy drive, but Windows crashes anyway. The same is without loading optional drivers.
View 2 Replies
View Related
Sep 17, 2005
Well I have a serious issue with my computer and one that means if I can't fix it I will have to replace my hard drive and reinstall windows. I recently installed kerio firewall and avant virus security along with a few other programs I got rid of, upon restarting like it told me to, like with most program installations, I got a blue screen telling me my drivers were not loaded and that windows was going to delete everything off my hard drive... I found it odd and slightly scarey so I rebooted in safe mode and did virus scans and the works, then did a system restore back to before I installed all of the program because that what I think causes it... It won't let me restore, it tells me it did but then when I try to get onto my normal system runnings, i can actually get into the desktop but everything is dreadfully slow and after about 20 minutes the blue screen message comes back up again... My explaination is rather bad so I will answer any questions you need me too
View 12 Replies
View Related
Aug 12, 2009
I was recently trying to install Medieval Total War II onto my computer. I've had it installed before in the past, and it worked fine on my computer. I wanted to play it again, so when I went to install it it gave me the blue screen. It said:Quote: A problem has been detected and windows has been shut down to prevent damage to your computer.PAGE_FAULT_IN_NONPAGED_AREAIt then said something about disabling BIOS memory options such as caching or shadowing, etc. Then it had what I'm guessing is the error code:***STOP: 0x00000050 (0x46263D6, 0x00000000, 0x804ED967, 0x00000001)
View 3 Replies
View Related
Jul 18, 2008
I put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies
View Related
Mar 16, 2008
My system was working fine until I installed XP SP2. I am having trouble with a Blue Screen Error "DRIVER_IRQL_NOT_LESS_OR_EQUAL" I believe NVGTS.SYS is the culprit ? I have had to boot in safe made with network to come here to try and get help. Can someone please give me a suggestion as to what might be the issue? I am trying to install this on a new system build, Intel Core 2 Quad Q6600 2.4 GHz, EVGA NForce 780i SLI, 2 gigs of OCz DDR 2 800, Nvidia 8800GTS (G92) 512mb 256-bit GDDR3 PCI-E 2.0 x-16, WD 74 gig Raptor, Liteon 20X DVDR. Thank you~David
View 4 Replies
View Related
Oct 20, 2005
tried to install a couple of programs..... all of the sudden I get the below screen with the 1606 error on it..
View 8 Replies
View Related
Jan 7, 2009
I have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
View 6 Replies
View Related
May 25, 2005
Okay, I bought a new mobo and set up a clone pc. ASrock combo mobo (the one with socket 754 and 939). I have everything set up right, POST confirms. Everything is good, POST works fine. I've got a formatted hard drive, no OS on it. I'm trying to install Windows to that OS, but it will not install. It goes to a blank screen after detecting my hardware settings. Wasn't sure if this topic should have gone in OS or hardware, so i put it here. I've tried 2 windows CDs and a Linux DVD on 2 different disc drives, and still nothing works past the "setup is detecting your hardware settings" screen. I have no idea what to do.
View 1 Replies
View Related
Jul 30, 2008
so when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies
View Related
Apr 28, 2007
Almost every time when I shut down my computer from windows I get a blue screen for a less than a second and than my machine restarts.After that on the log on windows after pressing shut down button I manage to shut it down.This issue is from a long time.
But recently I have problems starting my PC.It is unable to start windows.I tried to restart it many times.Same result.Finaly after starting in safe mode which was also dificult (many tries) the Windows started normaly.What could I do stoping this and I 'd like to find out what is causing my PC problems?In my system event viewer the latest error is "system error" event 1003 with these parameters.
View 3 Replies
View Related
Mar 18, 2006
I can't get pass the windows logo. I can't boot into safe mode, can't boot into last knowm configuration or boot to a crompt. I don't have a recovery disc. Can anybody help?
View 14 Replies
View Related
Sep 18, 2008
I tried to install windows xp professional. When it is installing the os in the blue screen. A pop up says. I tried to reinstall my windows xp because it couldnt boot up because it say that my drv.sbd got corrupted or missing file so i try to reinstall the os but problem popped up.The file AFw.Sys (unknown) is needed and they ask me to browse it for the path file but i cant find it nowhere. And then it says The exception unknown software exception (0XC0000409) occurred in the application at location 0X6976Ea96
View 2 Replies
View Related
May 27, 2006
Since I uploaded the update of Windows Defender my options on my PC have changed.I can no longer type any particular letters using my keybord without a window popping up. Here are the following keys which causes me problems: E = Opens up My Computer R= RUN U= Utilility Manager D= Desktop F= Search Results L= Login Window M= Desktop I cannot type in Google, Firefox address bar. If I press one of these keys while I'm on my Desktop these actions occur too.
View 1 Replies
View Related
