Installing w2k. As soon as the machine is to the point of installing the system when you hit return you get stop 0x00000023 (0x00e00c8,0xbfcf5128,0xbfcf4d80,0x80422bbd) address 80411bbd base at 80400000 datastop 3d363A77 -ntoskrnl.exe System is new motherboard, harddrive has been freshly formatted to fat 32. The system will boot to a 98 floppy start up and write files to the hard drive.
View 7 RepliesI have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
View 1 Replies View RelatedI installed PC Cillin 2007 on my laptop today. After the program installed, it restarted the computer and came back to a blue screen. STOP: OX0000008E (0XC0000005, 0XF8B0B1B2, 0XF2D89C9C, 0X00000000)windrvNT.sys - Address F8B0B1B2 base at F8B06000, DateStamp 409f405c I restarted in Safe Mode but the computer will not let me uninstall PC Cillin using the Add/Remove Program option or the uninstall option in PC Cillins folder. Can somebody help me uninstall the program? Thanks.
View 11 Replies View RelatedSession3_initialization_failed blue screen when installing win xp
View 1 Replies View RelatedI'm trying to install Windows XP (old install CD for sure) on a new system. When the install is checking my system configuration, I get the blue death screen (a problem has been detected... STOP... addresses... etc.).My Windows XP disk is original and in good condition. The hard disk is recognized and blank. The motherboard is a Gigabyte EP45-UD3P.Here's the error if it makes sense to anybody:"A problem has been detected and Windows has been shut down to prevent damage to your computer.STOP 0x0000005 0xF786A0BF 0xF7CB6208 0xF7CB5F0 pci.sys Address F786A0BF bas at F7863000, Datestamp 3b7d855c"
View 2 Replies View RelatedFor some time now a computer that I have has been constantly restarting, freezing or I had a look at it and he can't see any problems. suggested re-installing windows so I tried that, low and behold enter the Blue Screen, It has an error message
USBPORT.SYS - Address F83DB50D
I have a Dell Dimension 3000 running XP Professional. I have an 80G HD and 2GB RAM. I have downloaded and attempted to install Mediaplayer11.On the reboot I get the dreaded blue screen with the error 0X00000019 (0X00000020, 0X8A3400270, 0X8a34002A0, 0X1A060006) I then have to go to the safe mode and do a system restore
View 5 Replies View RelatedI have just installed a nvidia driver (84.21) to replace the version (77.77) I've successfully been running for several months now. Both are certified as compat with my 6800gt card. I seem to be able to instal it OK, files are copied across, the screen resets, the new driver is listed as installed uder the device manager and I get a message saying the new hardware has succesfully installed and I need to restart to finish installation.
When I do, i go through the usual boot through to the windows start up screen (with flag), then I get a blue secreen with "please wait....." after 5 secs the dots stop appearing, then within 30 secs the HD stops. The keyboard etc is frozen. I gave it 5 mins then reverted to last good config, and tried again deleting all previous nvidia drivers, but still get the same result. I also tried a different driver (83. something) and still the same. I had norton disabled during installation
After installing disney pix video editing software on my laptop, a blue screen appears saying "A problem has been detected and windows has been shut down to prevent damage to your computer." I tried to reboot in safe mode and unistall the software but it will not allow me. There is also an icon that pops up stating found new hardware DB CIF Cam. How can I resolve this problem?
View 1 Replies View Relatedi am getting an blue screen technical error while installing windows xp
View 1 Replies View RelatedNow, I wanted to install and image the Windows XP Proffessional of mine. It should've worked, but for some reason, it's giving me a blue screen error right when the Loading Windows part of setup starts. This blue screen error mentions pci.sys.Now I've installed that Windows XP Proffessional on about 5 machines before, and it's always worked for me (I believe it was 5 or so). Anyway, I've never needed to install it on this machine before until now, because it's more convienient to install it here. Note that it's not running on any other machine or anything, I haven't needed it installed on a machine for awhile.
Well, here's what I've been trying. According to several Internet sites, I might need to install additional drivers by creating a custom disk with nLite. I've indeed now created 1 DVD, and about 2 CDs, with different drivers and can't seem to find the right driver that needs sticking on there, because people seem to say different parts may be missing.If this makes any difference, I know that both my Home Edition and my Media Center Edition have Service Pack 2 on it when all I do is install the Windows. This CD of Windows XP Proffessional does not. It only has Service Pack 1 installed when you just install Windows with the disk.
As soon as it starts to run windows setup a blue screen appears and says:A problem has been detected and windows has been shut down to prevent damage to your computer.The problem seems to be caused by the following file setupdd.sys Page_fault_in_nonpaged_area This is the first time you have seen this stop error screen, restart you computer. If this screen appears again follow these steps. Check to make sure any new hardware or software is properly installed.
If problems continue, disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advance startup options, and then select safe modeTechnical Information: *** STOP: 0x00000050 (0xe1607088, 0x00000000, 0xfc44bf3e, ox00000001)
when i get my Dell Inspiron E1705 to boot from my windows xp cd it goes through the screen where xp is trying install all the raid drivers etc.. before i can actually access my two hard drives delete them and create a new partion. right when its about to get to that screen i get the blue screen of death. well i have been reading around i read that going into my bios and changing my hard drive config to sata auto detect will fix my problem.
well i went into my bios and i do not have any sort of options when it comes to my system to hard drive configuration so im assuming if i do not have this feature or option that i have a IDE hard drive not sata. so if this is my situation how do i get my computer to stop going to the blue screen of death before i get to the screen where i can delete my partion
I have a Sony Vio model PCG-3E2L. I tried installing xp on my sony computer that had vista on it. It continually blue screened during the very beginning of the install process. So, I decided to remove vista. I could not get vista to uninstall so I finally ran an older bootable windows like 98 or me which got me to dos. In dos I deleted and reset partitions. I did not format as format was not on the disk I used. Now, with a fresh hard drive I figured that xp would install but it won't. The computer boots by cd but again it continually blue screens at the beginning of the install process b/f it asks any questions but after loading drivers.
View 3 Replies View Relatedpop up saying that avg needed to update, it gave me the option to postpone it so i did; it told me it would be done when the computer was shut down.
today monday, i turned the computer on and all i had was a blue screen...the only way to access the computer was through the debugger mode, after several things I decided to repair my windows xp... and foolishly did not make backups of my data. During the XP repair the intallation was not completed when a new blue screened popped up saying a different message.BAD POOL CALLER and STOP: 0x000000c2 (0x00000007, 0x00000cd4,0x00340045,0xe1d4de7c)
Please help me with installing Windows XP on Dell T7400 with H/W RAID controller on 4 15k SAS harddrives. When installing windows I hit F6 to add optional RAID drivers and load this drivers using floppy drive, but Windows crashes anyway. The same is without loading optional drivers.
View 2 Replies View RelatedWell I have a serious issue with my computer and one that means if I can't fix it I will have to replace my hard drive and reinstall windows. I recently installed kerio firewall and avant virus security along with a few other programs I got rid of, upon restarting like it told me to, like with most program installations, I got a blue screen telling me my drivers were not loaded and that windows was going to delete everything off my hard drive... I found it odd and slightly scarey so I rebooted in safe mode and did virus scans and the works, then did a system restore back to before I installed all of the program because that what I think causes it... It won't let me restore, it tells me it did but then when I try to get onto my normal system runnings, i can actually get into the desktop but everything is dreadfully slow and after about 20 minutes the blue screen message comes back up again... My explaination is rather bad so I will answer any questions you need me too
View 12 Replies View RelatedI was recently trying to install Medieval Total War II onto my computer. I've had it installed before in the past, and it worked fine on my computer. I wanted to play it again, so when I went to install it it gave me the blue screen. It said:Quote: A problem has been detected and windows has been shut down to prevent damage to your computer.PAGE_FAULT_IN_NONPAGED_AREAIt then said something about disabling BIOS memory options such as caching or shadowing, etc. Then it had what I'm guessing is the error code:***STOP: 0x00000050 (0x46263D6, 0x00000000, 0x804ED967, 0x00000001)
View 3 Replies View RelatedI put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies View RelatedMy system was working fine until I installed XP SP2. I am having trouble with a Blue Screen Error "DRIVER_IRQL_NOT_LESS_OR_EQUAL" I believe NVGTS.SYS is the culprit ? I have had to boot in safe made with network to come here to try and get help. Can someone please give me a suggestion as to what might be the issue? I am trying to install this on a new system build, Intel Core 2 Quad Q6600 2.4 GHz, EVGA NForce 780i SLI, 2 gigs of OCz DDR 2 800, Nvidia 8800GTS (G92) 512mb 256-bit GDDR3 PCI-E 2.0 x-16, WD 74 gig Raptor, Liteon 20X DVDR. Thank you~David
View 4 Replies View RelatedHave a new HP laptop which had Windows 7 pre-installed. I couldn't get on with it so I tried installing XP but all I got was the "Blue Screen of Death" telling me that Windows had detected an error and had shut down. I tried again with the same result so I tried installing Linux (Ubuntu). This went on fine and so I tried XP again. Still the blue screen of death. XP will not install and I would be grateful for any help anyone can give to an oldie.
View 14 Replies View Relatedtried to install a couple of programs..... all of the sudden I get the below screen with the 1606 error on it..
View 8 Replies View RelatedI have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
I need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
View 1 Replies View RelatedMy Dell Inspiron 2650 laptop on boot-up consistently gives a blue screen with ERROR (0X000000ED (0X81ACA988, 0XC0000006,0X00000000,0X00000000). I have read most of your fixes BUT in my case no matter what I do it ALWAYS boots to this screen. Trying to boot to Safe Mode results in a list of drivers prefixed by ?multi(0)disk(0)rdisk(0)partition(2)c:windowsdriver.sys etc The machine will not boot from Floppy or CD and I?ve tried every combination of boot sequence under the F12 menu. In the BIOS it will not allow me to change any relevant settings, only the ?system date?, ?system time? and ?quiet boot?.and I cannot select the dropdown menu items either. Booting under Normal Startup, I see the Windows Logo and all that, but then the blue screen appears. I?ve tried removing the hard disk to get it to boot to floppy, removing the battery (which is totally dead), memory module, etc. Only thing left I think is to sling it in the Caribbean Ocean and go drink a bottle of rum.
View 14 Replies View RelatedI've installed a fresh copy of XP x64 recently but am being constantly interupted by blue screen errors.I've used driver agent to check for updated drivers, and all (according to this site) are current. there is no pattern to the blue screens. happens with one program open, sometimes no programs (at night). sometimes after 10 minutes, sometimes after several hours.
View 26 Replies View RelatedI recently baught a used machine that came with a working clean cut legal copy of Windows XP. Needless to say I was thrilled, but I machine to use as a Linux file server, but this Windows XP installation was too valuable for me to simply discard. I took out the hard drive and placed it another computer. The computer boots windows XP, then 2 seconds later it blue screens and reboots (much too quickly for me to read the error message)
I'm thinking here, the obvious problem is that I took a Windows XP installation and changed all the hardware on it and it didn't have the drivers for it. I attempted to run the recovery console from a Windows XP installation disc and it asked me for the administrator password. The drivers are on the XP disc somewhere, I would like to know how to install them manually (using a Linux boot disc to move files from the XP installation disc to the hard drive)
so every time i boot the computer i get that good ol' blue screen of death right where windows should open to my desktop.. instead it says "welcome" with the light blue background.. the screen goes black and then comes back with the blue screen.. the message on the screen says:
stop: 0x0000007a (0xe16dac70, 0xc0000185, 0xbf985c66, 0x20e18860)
win32k.sys - address bf985c66 base at bf800000, datestamp 41107f7a
beginning dump of physical memory dumping physical memory to disk: and counts up to 100 then the computer restarts. i was able to get into safe mode to try a system restore but when the computer restarted it never finished the install (it actually gave me the confirmation that the restore was successful while i was doing a repair install later on) i have tried going through the windows install disc repair utility and doing a chkdsk /p and a chkdsk /r upon doing /r it froze at 53 percent and did not move (i left it for a good 4 hours the first time before restarting it.. and then over night the second time.. and both times it never passed 53 percent............
its a FX7026. I had to replace the motherboard and am trying to install XP on it, but after loading all the install drivers it blue screens. I have installed a trial vista on it to make sure it isn't just a problem with the computer and it installs fine, but when I try XP it keeps popping a blue screen.
View 5 Replies View RelatedMy laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies View Relatedwhen I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?