Blue Screen Appears When Installing New Copy Of Winxp?
Apr 2, 2005
As soon as it starts to run windows setup a blue screen appears and says:A problem has been detected and windows has been shut down to prevent damage to your computer.The problem seems to be caused by the following file setupdd.sys Page_fault_in_nonpaged_area This is the first time you have seen this stop error screen, restart you computer. If this screen appears again follow these steps. Check to make sure any new hardware or software is properly installed.
If problems continue, disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advance startup options, and then select safe modeTechnical Information: *** STOP: 0x00000050 (0xe1607088, 0x00000000, 0xfc44bf3e, ox00000001)
View 1 Replies
ADVERTISEMENT
May 30, 2007
what this might mean and what I might can do to rectify it win32k.sys - Address BF8CE1CC base at BF800000, Datastamp45f013fs
View 3 Replies
View Related
Aug 31, 2007
First i tried to boot from disk and then it told me that i dont even have a hard drive installed. I fixed this problem by pressing F6 when my windows cd was booting up and now it loads some RAID drivers off from a floppy disk i made up so that the HDD is there.
Just as some other posts have mentioned, i did not try the recovery console and went straight into setting up windows. When it asks me to choose a partition. I selected the one that i created when i built my computer (the one i have very valuable files on) and from there it gives me the "blue screen of death" or so my friend used to call it...the one that says the computer has been shut down to prevent damage to my computer.
Any ideas?
Also, with no other ideas i went into the recovery console... it asks something around "on what volume do you want to recover"...so i press the number 1 which is drive C then from there goes to the blue screen again.
Another thought i ran across is that the disk i am trying to use is a windows xp home and i set up my computer with xp pro....i seem to have lost the disk!!! Im hoping that's not the reason for the blue screen.
Thanks a lot!
View 11 Replies
View Related
Nov 24, 2007
I have given my sister my old Averatec laptop that has Windows XP on it. While she is using it, eventually a blue screen appears, which is the precursor to it restarting suddenly. It happens so fast that we cannot read what the blue screen says. After it starts back up, we get a microsoft report saying a serious error has occured. This might not help, but I'll list it just in case. The error signature is:Is this a virus? If so, is there any hope without reformatting? I accidentally uninstalled the program that contained the OS files when I first got the computer.
View 14 Replies
View Related
Sep 14, 2005
Every time i try to boot up my laptop i get a blue screen with the following...
*** STOP: 0x000000c5 (0x00000002, 0x00000001, 0x8053E059)
What does it mean, and how can i fix it?
View 1 Replies
View Related
Apr 12, 2008
I have got a HP Laptop that is about a year a half old, its top of the range. I had my laptop in Hibernate mode the other night and the next afternoon I went to turn it back on there was a blank screen for a long time, all the lights on the laptop were on but nothing on the screen. I turned the laptop off and then back on again. and BOOM! The blue screen of death!The computer starts up with the HP logo and then it pops up a screen saying that a previous attempt to start up had failed and it gave me options to start up in safe mode, safe mode with networking, safe mode with command prompt, start with the previous successfull start config, and normal start up. When i click ANY of these the windows logo pops up for about 3 seconds and then the blue screen, which appears for long enough for me to read 3 letters or numbers at a time. Then the computer restarts and we go through the whole process again. This is what I have done in the hope of fixing it.
I used my HP retore disks and it loaded disk 1 of 3 and it didnt ask for the other 2 disks which i thought was odd. But that made no differeance still the same start up process as explained above.The blue screen made mention of chkdsk and i read about some poeple on the net doing a chkdsk and it fixing similar problems. So i read that i needed a xp install disk to access the windows recovery console and type r. BUT i have a OEM installation so i have NO disks! So what i did was i got the XP Pro disk i have from a few years ago that i had on Desktop. BUT when it goes into recovery console it can not find any hard drives!
#Ive tried spinrite and it reads all the hard drives in the computer so i know that they are still there.
#I've tried to find some chkdsk bootable cd's but most are either floppy only or they only for FAT16/32 file systems, my file system is NTFS.I'am convinced from the research done that if I can run CHKDSK on the computer then it should fix the file error and then i can at least back up my data and then do a full format and start fresh again. But I have to be able to get this computer running.I just tried the "Last Known Good Configuration" selection and it says that the system32/config/SYSTEM file is missing.I would welcome any help, as I have exhausted all options that I can see available to me. From what I can see, the biggest problem is that im running a OEM version of windows. But then again the recovery console couldnt find the hard drives, so i dont know.
View 6 Replies
View Related
Mar 22, 2007
I was having some problems with windows xp media centre 2005 on my dell dimension 9150 so i decided to do a repair, i put in the xp cd and booted from it at start up, then the blue screen appears and the process starts, i then get the choice to install windows or repair using the recovery console, i chose install windows and then pressed r for repair on the os that was already there.It now has gone to the installation off the os where it installs the files and finalizes the process, it is getting to the third option where it installs devices but it is getting about three quarters of the way and then the driver box pops up saying that microsoft does not athorize the use of the driver would you like to continue but the thing is i cant, my mouse will not move on the screen so i am unable to click continue.
View 4 Replies
View Related
Mar 4, 2008
I installed a fresh copy of Windows XP sp2, and just now I've noticed that when I open a movie the blue screen appears.the screen contains the following error:"at the beginning"DRIVER_IRQL_NOT_LESS_OR_EQUAL (now this is the error)
View 7 Replies
View Related
Feb 23, 2008
My laptop keeps crashing and the dreaded blue screen appears. I've read similar threads on this forum and note that the exact text should be included in threads. So here goes - took me about 15mins to write it all down!A problem has been detected and windows has been shut down to prevent damage to your computer.
View 8 Replies
View Related
Oct 4, 2006
My screen just went to blue and states that "Warning spywrae threat detected on your pc"
to protect your computer from spyware attacks click here"
And then a warning keeps popping up from the active process bar saying
"system needs neseccary installation of spyware"
When i close the pop-up this web site appears http://total-pc-protection.com/
View 8 Replies
View Related
Jan 27, 2006
I have been experiencing intermittent bootup problems with Windows XP. When this happens, the XP splash screen appears(blue line scrolling) and then monitor loses signal and reboot occurs. This can cycle several times, even if I choose the option of starting Windows with last known configuration that worked. It always eventually loads and reports that Windows experienced a serious problem.
View 5 Replies
View Related
Jun 13, 2008
When i turn it on I get the 'Windows did not restart properly screen'and no matter which of the options I choose, i see the windows logo loading after a short time the blue screen apears for a split second and then its back to the first screen all over again.
iv gone into BIOS, i ran the HD self test, and both the short and long test fail before really even doing anything.
View 1 Replies
View Related
Nov 12, 2006
im new I have a Toshiba Equium EA60-173 PSA67E-00700C8J.Im having often reoccuring problems almost as soon as i reboot my laptop freezes and a blue screen appears saying the ati2davg display driver is stuck in an infinate loop. and my laptop has to be rebooted, also it freezes and changes to the lowest display settings and a window appears saying the display driver it has stopped working properly. I need advise on how to sort this as its very annoying, my laptop also over heats, gets very hot and just turns itself off. the fan constantly runs.
View 27 Replies
View Related
Oct 9, 2009
When ever I put my flash drive in USB port, my computer shuts down and a blue screen appears, and in that blue screen it says that for protection of computer will be shut down in so and so minute, but when I use the same drive at work I have no problem with the drive neither with computer, Is there anything wrong with my computer?
View 1 Replies
View Related
May 30, 2006
I'm trying to get a new usb mouse to work on it, and I have the drivers for it - but when installing the 'new hardware', it reaches a point wherein it asks to insert the "Windows XP Home Edition CD-ROM", but I don't have one! It won't allow me to skip this, and if I click cancel, the mouse isn't installed, and an error window appears saying that an error occured during the new hardware's installation.
View 3 Replies
View Related
Jan 18, 2008
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
View 1 Replies
View Related
Feb 22, 2005
Installing w2k. As soon as the machine is to the point of installing the system when you hit return you get stop 0x00000023 (0x00e00c8,0xbfcf5128,0xbfcf4d80,0x80422bbd) address 80411bbd base at 80400000 datastop 3d363A77 -ntoskrnl.exe System is new motherboard, harddrive has been freshly formatted to fat 32. The system will boot to a 98 floppy start up and write files to the hard drive.
View 7 Replies
View Related
Nov 5, 2006
I installed PC Cillin 2007 on my laptop today. After the program installed, it restarted the computer and came back to a blue screen. STOP: OX0000008E (0XC0000005, 0XF8B0B1B2, 0XF2D89C9C, 0X00000000)windrvNT.sys - Address F8B0B1B2 base at F8B06000, DateStamp 409f405c I restarted in Safe Mode but the computer will not let me uninstall PC Cillin using the Add/Remove Program option or the uninstall option in PC Cillins folder. Can somebody help me uninstall the program? Thanks.
View 11 Replies
View Related
Apr 23, 2010
Session3_initialization_failed blue screen when installing win xp
View 1 Replies
View Related
Jan 12, 2009
I'm trying to install Windows XP (old install CD for sure) on a new system. When the install is checking my system configuration, I get the blue death screen (a problem has been detected... STOP... addresses... etc.).My Windows XP disk is original and in good condition. The hard disk is recognized and blank. The motherboard is a Gigabyte EP45-UD3P.Here's the error if it makes sense to anybody:"A problem has been detected and Windows has been shut down to prevent damage to your computer.STOP 0x0000005 0xF786A0BF 0xF7CB6208 0xF7CB5F0 pci.sys Address F786A0BF bas at F7863000, Datestamp 3b7d855c"
View 2 Replies
View Related
Jul 30, 2005
My computer seems to work fine except when I try to do a copy in Casper XP to backup my hard drive to external HD. I also got this stop code last night when trying to do a disk check to correct errors. Stop 0X0000000A (0X00000188, 0X000000FF, 0X00000000, 0X804E35E9). I have located online page for stop 0X0000000A codes which states could be driver problem... that last one parimeter 4 -- 804E35E9 how/where would I
find out which/if this is associated to a particular driver so I can possibly correct it?
View 8 Replies
View Related
Jul 15, 2005
For some time now a computer that I have has been constantly restarting, freezing or I had a look at it and he can't see any problems. suggested re-installing windows so I tried that, low and behold enter the Blue Screen, It has an error message
USBPORT.SYS - Address F83DB50D
View 2 Replies
View Related
Dec 31, 2009
I have a Dell Dimension 3000 running XP Professional. I have an 80G HD and 2GB RAM. I have downloaded and attempted to install Mediaplayer11.On the reboot I get the dreaded blue screen with the error 0X00000019 (0X00000020, 0X8A3400270, 0X8a34002A0, 0X1A060006) I then have to go to the safe mode and do a system restore
View 5 Replies
View Related
Apr 26, 2006
I have just installed a nvidia driver (84.21) to replace the version (77.77) I've successfully been running for several months now. Both are certified as compat with my 6800gt card. I seem to be able to instal it OK, files are copied across, the screen resets, the new driver is listed as installed uder the device manager and I get a message saying the new hardware has succesfully installed and I need to restart to finish installation.
When I do, i go through the usual boot through to the windows start up screen (with flag), then I get a blue secreen with "please wait....." after 5 secs the dots stop appearing, then within 30 secs the HD stops. The keyboard etc is frozen. I gave it 5 mins then reverted to last good config, and tried again deleting all previous nvidia drivers, but still get the same result. I also tried a different driver (83. something) and still the same. I had norton disabled during installation
View 3 Replies
View Related
Dec 27, 2008
After installing disney pix video editing software on my laptop, a blue screen appears saying "A problem has been detected and windows has been shut down to prevent damage to your computer." I tried to reboot in safe mode and unistall the software but it will not allow me. There is also an icon that pops up stating found new hardware DB CIF Cam. How can I resolve this problem?
View 1 Replies
View Related
Jun 19, 2010
i am getting an blue screen technical error while installing windows xp
View 1 Replies
View Related
Sep 23, 2008
Now, I wanted to install and image the Windows XP Proffessional of mine. It should've worked, but for some reason, it's giving me a blue screen error right when the Loading Windows part of setup starts. This blue screen error mentions pci.sys.Now I've installed that Windows XP Proffessional on about 5 machines before, and it's always worked for me (I believe it was 5 or so). Anyway, I've never needed to install it on this machine before until now, because it's more convienient to install it here. Note that it's not running on any other machine or anything, I haven't needed it installed on a machine for awhile.
Well, here's what I've been trying. According to several Internet sites, I might need to install additional drivers by creating a custom disk with nLite. I've indeed now created 1 DVD, and about 2 CDs, with different drivers and can't seem to find the right driver that needs sticking on there, because people seem to say different parts may be missing.If this makes any difference, I know that both my Home Edition and my Media Center Edition have Service Pack 2 on it when all I do is install the Windows. This CD of Windows XP Proffessional does not. It only has Service Pack 1 installed when you just install Windows with the disk.
View 7 Replies
View Related
Sep 7, 2008
when i get my Dell Inspiron E1705 to boot from my windows xp cd it goes through the screen where xp is trying install all the raid drivers etc.. before i can actually access my two hard drives delete them and create a new partion. right when its about to get to that screen i get the blue screen of death. well i have been reading around i read that going into my bios and changing my hard drive config to sata auto detect will fix my problem.
well i went into my bios and i do not have any sort of options when it comes to my system to hard drive configuration so im assuming if i do not have this feature or option that i have a IDE hard drive not sata. so if this is my situation how do i get my computer to stop going to the blue screen of death before i get to the screen where i can delete my partion
View 3 Replies
View Related
Oct 27, 2009
I have a Sony Vio model PCG-3E2L. I tried installing xp on my sony computer that had vista on it. It continually blue screened during the very beginning of the install process. So, I decided to remove vista. I could not get vista to uninstall so I finally ran an older bootable windows like 98 or me which got me to dos. In dos I deleted and reset partitions. I did not format as format was not on the disk I used. Now, with a fresh hard drive I figured that xp would install but it won't. The computer boots by cd but again it continually blue screens at the beginning of the install process b/f it asks any questions but after loading drivers.
View 3 Replies
View Related
Jun 8, 2010
pop up saying that avg needed to update, it gave me the option to postpone it so i did; it told me it would be done when the computer was shut down.
today monday, i turned the computer on and all i had was a blue screen...the only way to access the computer was through the debugger mode, after several things I decided to repair my windows xp... and foolishly did not make backups of my data. During the XP repair the intallation was not completed when a new blue screened popped up saying a different message.BAD POOL CALLER and STOP: 0x000000c2 (0x00000007, 0x00000cd4,0x00340045,0xe1d4de7c)
View 4 Replies
View Related
Sep 20, 2008
Please help me with installing Windows XP on Dell T7400 with H/W RAID controller on 4 15k SAS harddrives. When installing windows I hit F6 to add optional RAID drivers and load this drivers using floppy drive, but Windows crashes anyway. The same is without loading optional drivers.
View 2 Replies
View Related
