Black Screen Appears After Load Screen - Uninstall A USB Bluetooth Driver
Nov 10, 2006
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
View 4 Replies
ADVERTISEMENT
Feb 6, 2009
A few weeks ago it started freezing and restarting randomly. Sometimes, on restarting, I would get the "Serious error" pop-up, which I always sent, and always got different results. Sometimes it would say it was an unknown driver error, sometimes an anti-virus error, once a RAM error. I had just upgraded the RAM when this started, so I ran the M$ testing tool several times, no errors. I also removed the new RAM, which didn't solve the problem, and put it back in
View 8 Replies
View Related
May 26, 2006
I recently re-installed win. xp on the dell insperation 2400. Everything went find except the resoluton wouldn't change from the 480 x ...so I tried to set up my dial up but I needed a higher resolution. I did finally find a way to get that although it was very poor quality and I figured that I'd be able to down load the proper driver once on line, which I did do, although I'm not sure it was the right one, as dell doesn't seem to have anything for that model of pc. Anyway I also downloaded the Microsoft updates to get back to current for the secruity stuff. When that was done it required restart, which I did. When it restarted the monitor remained blank after the win. xp part was done loading. I know its on and that my pc is sitting there running, but I can't see anything. I restarted using F5 and tried; last known good configuration, vga mode, and safe mode. In the 1st 2 no monitor. In safemode the whole screen filled with a dos like line repeated over again to fill the whole screen, then a message came on that said, "stop!!! fatal error and I can't remember what else. Can you help? I guess I should mention that I don't have the right driver disk that came with the pc.
View 14 Replies
View Related
Oct 1, 2008
Recently XP Pro has been taking ages to boot up. The system post screens come up and the windows loading bar shows no problem but then before the windows welcome screen appears followed by the desktop i get a black screen for approx 30 - 60 seconds.Once the desktop has finally loaded the pc works absolutely as normal I have not installed any new hardware or software recently.I cannot hear any drive activity during the black screen
View 6 Replies
View Related
Oct 29, 2010
whenever i start my dell laptop inspiron 6000 after the dell load a black screen appears with a white loading bar appears which loads for about 10 minutes and then the windows xp proffesional sp2 loads i had recently reinstalled windows from a cd can you please tell me how to get rid of this black loading screen
View 5 Replies
View Related
Jan 20, 2007
every time i finish playing a game and exit out of it to return to windows. all i get is a black screen with my mouse curser, everything is still there i just carnt see anything. to fix this everytime i just push the windows button on the universal remote to media center, it starts up i exit out of it then everything is normal. just a little anoying having to do this after every game i play.
View 1 Replies
View Related
Jan 6, 2006
I installed xp pro with slipstreamed SP2. I thought everything was going fine but just a split-second after I see the desktop, the screen goes black.Athlon XP 1600, ECS Elite K7AMA3 KT266A, Sapphire Radeon 9250 128DDR.
View 1 Replies
View Related
May 1, 2009
My computer was having some issues so I manually re-installed windows media center edition on my Dell 9300 laptop using the disks Dell provides ( run on sentence). Formatted and re-intalled everything went great. Added all software-everything great. However during the install it asked where to load the new operating system there were 3 or 4 places to load, screen said to load to biggest partition. I did. Why are there so many partitions and are they needed? Do they take up space? Also now when the system reboots a black screen shows up and says which operating system do you want to load, they are both the same I leave it at the top one and windows loads with no problems. How do I either get rid of this bogus operating system or diable this page from coming up?
View 1 Replies
View Related
Dec 12, 2007
My notebook starts acting like this (just black screen appears after window logo on startup) durning these days. Whenever this happens, i restart it and it asks me to choose Safe Mode, Safe Mode with command prompts, start window normally,etc. I choose start window normally . It was ok evey time i restart till yesterday. When i restart it as usual and choose "start windown normally" today, nth appears but just black screen after window logo. What's the problem.If i have to choose Safe Mode, after choosing it wat should i do?
View 5 Replies
View Related
Apr 12, 2008
I have got a HP Laptop that is about a year a half old, its top of the range. I had my laptop in Hibernate mode the other night and the next afternoon I went to turn it back on there was a blank screen for a long time, all the lights on the laptop were on but nothing on the screen. I turned the laptop off and then back on again. and BOOM! The blue screen of death!The computer starts up with the HP logo and then it pops up a screen saying that a previous attempt to start up had failed and it gave me options to start up in safe mode, safe mode with networking, safe mode with command prompt, start with the previous successfull start config, and normal start up. When i click ANY of these the windows logo pops up for about 3 seconds and then the blue screen, which appears for long enough for me to read 3 letters or numbers at a time. Then the computer restarts and we go through the whole process again. This is what I have done in the hope of fixing it.
I used my HP retore disks and it loaded disk 1 of 3 and it didnt ask for the other 2 disks which i thought was odd. But that made no differeance still the same start up process as explained above.The blue screen made mention of chkdsk and i read about some poeple on the net doing a chkdsk and it fixing similar problems. So i read that i needed a xp install disk to access the windows recovery console and type r. BUT i have a OEM installation so i have NO disks! So what i did was i got the XP Pro disk i have from a few years ago that i had on Desktop. BUT when it goes into recovery console it can not find any hard drives!
#Ive tried spinrite and it reads all the hard drives in the computer so i know that they are still there.
#I've tried to find some chkdsk bootable cd's but most are either floppy only or they only for FAT16/32 file systems, my file system is NTFS.I'am convinced from the research done that if I can run CHKDSK on the computer then it should fix the file error and then i can at least back up my data and then do a full format and start fresh again. But I have to be able to get this computer running.I just tried the "Last Known Good Configuration" selection and it says that the system32/config/SYSTEM file is missing.I would welcome any help, as I have exhausted all options that I can see available to me. From what I can see, the biggest problem is that im running a OEM version of windows. But then again the recovery console couldnt find the hard drives, so i dont know.
View 6 Replies
View Related
Feb 5, 2005
My computer has given me problems from day 1. Currently, it fails to recognize my E drive. When rebooting, a black screen appears that says "Secondary drive 1 not found." When restring to an earlier date, a screen says that the E drive cannot be restored because it is either turned off or disabled. The harddrive light which usaully flickers when the computer is working now stays on all the time.
View 3 Replies
View Related
Nov 12, 2006
im new I have a Toshiba Equium EA60-173 PSA67E-00700C8J.Im having often reoccuring problems almost as soon as i reboot my laptop freezes and a blue screen appears saying the ati2davg display driver is stuck in an infinate loop. and my laptop has to be rebooted, also it freezes and changes to the lowest display settings and a window appears saying the display driver it has stopped working properly. I need advise on how to sort this as its very annoying, my laptop also over heats, gets very hot and just turns itself off. the fan constantly runs.
View 27 Replies
View Related
Jan 2, 2009
I had a copy of windows xp home addition i think. I have a copy of Professional i was going to put on the computer. It was doing the normal load that i have seen window do before when loading on other computers. Then it came to a blue screen that said something to the affect of Windows startup is installing. It used to go to the loading screen then shut itself off and start again. I went to bios trying to figure out why it doesn't load. Now after the blue screen saying it is restarting setup it now goes to a black screen with a blinking cursor that i can move.
View 14 Replies
View Related
Sep 3, 2004
i have a ms 6337 lite mother board with a p3 i haven't used this MB for about 6 months.my son is here now and i don't want him on my soooo i bought a new hard drive maxtor 40 g diamondmax plus 8installed windows xp.the MB posts, i can get in the bio's.but it will not load in to windows i get a black screen or a black screen with a blinking sensor and i cant do nothing form therethis same hard drive will boot on my other pc and load in to windows.i am running windows 98se on it. i put the disk with windows 98 on the ms mb and it will not load in to windows. only to the logo screen and freezes up. also when i try to use the boot disk it get to the point " starting your computer now and freezes
View 14 Replies
View Related
Sep 24, 2008
I just replaced my power supply because after coming back from vacation my PC wouldn't boot. The new supply power works but I get to the XP load scree with the little progress bar and it just hangs there. I restored to last know good point and that did nothing and I did a system restore and neither seemed to help. I am able to start in safe mode but I'm not sure where to turn and I'm not sure what happened while I was gone
View 1 Replies
View Related
May 16, 2007
The PC is now over a year old and has been running fine for about a year.
AMD 3500+939GT4- SLI-G Mobo
2 GB Twinmoss Ram200 Sata HD DVD 6600GT Sli Pixel View Graphics PCIe Super Flower 500 Watt PSU.
Now about 6 months ago, I started to get the Nvidia card sentinal saying the Graphics Card isnt getting enough power and will reduce its performance to prevent any damage. I checked it all out and it appear to be fine so pretty much ignore the issue.
View 4 Replies
View Related
Jun 6, 2010
Turned the computer on today and Windows will not load, gets as far as the black Windows XP page with the loading scroll bar. Nothing happens beyond that. Everything was working fine yesterday and nothing was downloaded or installed to indicate where to start looking. Tried installing 1GB RAM last month to no avail and took it out. Things have been okay since. Have read some posts that suggest using the Windows install CD to repair whatever but I didn't get one with the computer only have the Windows recovery disk.
View 6 Replies
View Related
Nov 12, 2007
Hi...I have a compaq 5108US, windows xp pro.. recently installed a new hard drive, which worked fine for a few months. now when I try to turn on the computer, all I get is a black screen, with the compaq logo, and an immediate blinking cursor in the upper right hand corner. Tabbing f8 etc does not bring me to the safe mode option screen. I had the same problem a few months ago
View 6 Replies
View Related
May 23, 2008
My Medion PC running Windows XP loads past the windows loading screen then simply goes black but the computer is still on and the screen is still active. My dual boot of Ubuntu works perfectly as does safe mode. Ive had this issue for a while but it used to turn on after i rebooted it but now it only turns on occasionally. Also I'm almost certain its got nothing to do with my hardware.
View 4 Replies
View Related
May 29, 2009
i have a dell dimension 310 with Window xp. when started the first screen is black and says floppy disk seek error, i dont even have a floppy drive. press f1 and will go to sign on screen, you press the user and xp pops up for a second and back to sign on screen.it wont stay open.
View 2 Replies
View Related
Oct 28, 2008
its my previously-formatted HP Pavilion dv5201tx! The problem is as the title above. I can go into safe mode. I've used system restore twice. And in Documents and Settings folder I noticed it has:
Administrator
Administrator.computer description name
Administrator.computer description name.000
username1
username2
Is it creating more user folders? At some point Administrator.computer description name.000 wasn't there. Corrupted registry hive? I'm not sure! Restarted many times, used Last known good configuration, and it's still black after the boot screen. Please help!
View 4 Replies
View Related
Apr 5, 2010
My computer screen freezes up after a while, then turns into a blank light blue screen and then into a black screen. I have used regcure, PCMedkit, and PC Doc Pro I have also tried some of the online help for a fee but nothing seem to work. Lately when trying to reboot I got a blank red screen. I'm using xp pro and a Nvida GeForce 9400GT GRAPHICS CARD.
View 18 Replies
View Related
Jan 19, 2007
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies
View Related
Jul 17, 2005
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
View 3 Replies
View Related
Jul 20, 2005
friend whose computer has crashed the screen had frozen. He could do nothing except reboot it using the power button but on rebooting, there was a 'no signal' message on a black screen. We have checked the monitor connections (the monitor works when connected to his second computer) and even replaced the video card but of course this made no difference (no signal) We've taken out the HD and installed it on his second system. Does this mean that the most likely cause now is the motherboard/bios or is there something wrong in our approach/deductions
View 5 Replies
View Related
May 9, 2007
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
View 1 Replies
View Related
Oct 23, 2009
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies
View Related
Jul 15, 2007
my computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
View 14 Replies
View Related
Apr 1, 2008
Using window xp pro I on computer.I'm using pentium 3..
It's fine loading bios and till window xp logo..
when it starting to load the welcome window screen.. (which it didnt reach the welcome screen at all)
It just stuck at the black screen.. so i try to run in safe mode, weirdly it able to open.. okie
i tried to reformat... but it doesnt seems to work, it happens the same thing..
b4 this happened.. it all started one day.. i let my computer to download some personal stuff.. then computer got hanged, and i just shut the computer just like that..so now, i cant reach the welcome screen at all..
View 2 Replies
View Related
Aug 9, 2010
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies
View Related
Feb 11, 2009
Was working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies
View Related
