Unable To Repair - Blue Screen Error
Dec 22, 2004
I have an XP Pro computer with SP1a. The computer started resetting itself after a blue STOP screen that flashed on for a fraction of a second shortly after the XP Professional startup screen. Since I couldn't persuade it to go into safe mode (or any mode), I tried a repair from installation CD. After about 20 minutes in the Installing Drivers section of the install it gives a STOP error saying that the CDR4_XP.SYS driver may be corrupt, and the error Page Fault in Nonpaged Area. It then does a memory dump and restarts with a Chkdsk and resumes installing drivers again. After a further 20 minutes the whole saga repeats itself. I have gone into the recovery console and get a warning message System Registry does not appear to have an active ControlSet key. I can then put in the Admin password and get into the console.
View 4 Replies
ADVERTISEMENT
Mar 20, 2009
PC running XP media edt. Once turned on I get The following file is missing or corrupt
windowssystem32configsystem.This happens even in safe mode. Then tried to do a repair with the system discs as soon a s I get to the recovery console ans type the Windows version to repair I get the dreaded blue screen with message Stop error 0x00000043 0XC35C6000 0X00000000 0X00000000. So I can't boot into windows nor do a repair. I@ve tested the memory.
View 7 Replies
View Related
Oct 18, 2006
I have Windows XP Pro SP2 installed and I messed it up.I tried doing loads of stuff and I had to repair the master boot record and boot.ini file.Then when I booted on xp, the blue screen appared.I checked my hardware and did loads of tests but didn't find much problems and I if I did, I didn't understand them.For example I had test problems with my parallel ports and serial ports and the System Stress Test failed in RAM Memory.Anyway, I desided to use the repair installation on my CD Windows XP Pro SP1. But each time it arrived at "installing hardware", it failed and just stoped. tried a few times but it kept stoping. And now the repair doesn't even start... all I see is the mouse.
View 4 Replies
View Related
Jun 8, 2010
pop up saying that avg needed to update, it gave me the option to postpone it so i did; it told me it would be done when the computer was shut down.
today monday, i turned the computer on and all i had was a blue screen...the only way to access the computer was through the debugger mode, after several things I decided to repair my windows xp... and foolishly did not make backups of my data. During the XP repair the intallation was not completed when a new blue screened popped up saying a different message.BAD POOL CALLER and STOP: 0x000000c2 (0x00000007, 0x00000cd4,0x00340045,0xe1d4de7c)
View 4 Replies
View Related
Mar 22, 2007
I was having some problems with windows xp media centre 2005 on my dell dimension 9150 so i decided to do a repair, i put in the xp cd and booted from it at start up, then the blue screen appears and the process starts, i then get the choice to install windows or repair using the recovery console, i chose install windows and then pressed r for repair on the os that was already there.It now has gone to the installation off the os where it installs the files and finalizes the process, it is getting to the third option where it installs devices but it is getting about three quarters of the way and then the driver box pops up saying that microsoft does not athorize the use of the driver would you like to continue but the thing is i cant, my mouse will not move on the screen so i am unable to click continue.
View 4 Replies
View Related
Jan 20, 2008
Acer laptop (TravelMate 4020) that operates using Windows XP. When I started up my computer the other day, I received the following message: "Windows could not start because the following file is missing or corrupt:WindowsSystem32ConfigSystem You can attempt to repair this file by starting Windows setup and using the original setup CD-rom. Select 'r' at first screen to start repair."
View 8 Replies
View Related
Jun 30, 2008
I rebooted computer and got an error about a missing or corrupt file so windows would not even start to load.I got the bright idea that I could do a repair install of Windows.After the repair install copied the files necessary, it restarted the computer and I got the same "file missing or corrupt" error. So I found the file that was corrupt online and copied it to the HDD.Now my problem is that the Windows repair install is giving me an error after it loads the install and comes up with the install screen.
View 4 Replies
View Related
Mar 7, 2006
Using windows xp media center edition service pack 2 Really need help. My sister called me to fix her computer today, i took a look and found that the sound card wasnt installed so i reinstalled it. Every thing was find, i decided to show her how to restore her system (using windows restore). Incase anything went wrong again (most things that go wrong on her computer are her fault). When i did the system restore the computer boot up to a screen saying.Windows Could not start because the following file is missing or corrupt:System32driverssapnp.sys You can attempt to repair this file by starting windows setup using the orignal setup CD-ROM.Select 'r' at the first screen to start repair.
View 2 Replies
View Related
Jan 8, 2007
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
View 9 Replies
View Related
Nov 22, 2008
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
View 7 Replies
View Related
Sep 22, 2008
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
View 5 Replies
View Related
Nov 12, 2009
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies
View Related
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Oct 23, 2009
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies
View Related
Nov 18, 2006
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies
View Related
Apr 7, 2006
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
View 4 Replies
View Related
Aug 4, 2008
I have a PC that has had Vista on it and am trying to install XP. I connected the drive to my other XP machine to back up some data from it and then used disk management to format it (NTFS). When I tried to install XP (SP2) from the CD it kept going to a blue screen. The blue screen says it has stopped windows due to a problem and give the stop code - *** STOP: 0x0000007B (0XF7CAE524, 0xC0000034, 0X0000000, 0X0000000)
I tried deleting the partition to see if the Windows disk would make it to the format but the same thing happened. It's a SATA drive that I am using.
View 6 Replies
View Related
Aug 22, 2005
Well microsoft does it again!! after spendig 2 hours cleaning up spyware,adware and viruses I needed to do a repair on a XP Home computer that was completely updated from Microfts Update Website. This is where it begins. All was going fine until a message popped up saying UNREGMP2.EXE "**GetIUMS could not be located in the DLL msdart.dll**". I clicked the OK button multiple times but the error wouldn't go away.
View 7 Replies
View Related
Aug 5, 2008
Well i built my pc along with my friend at the end of April. I have had it for several months now. After i first built it, it ran just fine for about a month then BSOD started to occur. I researched on the internet and i found a post that said to post my minidump so that they can see it. When i searched for the minidump it wasnt there, my final solution was to reformat. I reformatted and the problem went a away.
View 12 Replies
View Related
Apr 10, 2010
Recently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
View 3 Replies
View Related
Aug 19, 2009
I used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
View 12 Replies
View Related
Jan 26, 2006
Dell inspiron 1000 2.2 celeron 256 ram 40gig Win-xp.the machine had recovered from serious error. Upon rebooting the windows program would not load and the hard drive made a clicking sound. I went into setup and no value was set for the hard drive. then the clicking stopped for no apparent reason and i got the windows to load. i went on line for about an hour then the clicking noise started again and the unit shut itself off and tried to reboot on its own. again i went to setup and no hard drive was detected. I did nothing but look around in the setup and again the clicking stopped on its own. the windows loaded again and i am online just now creating this message. Usually the cooling fan would be running alot, however i did not hear it running at all since the blue screen.I have had numerous blue screens. the online search always points to the Sonic Record Now as the culprit but offers no solution.
View 2 Replies
View Related
Oct 14, 2009
We've had 3 cases today of people who cannot login at all.After the boot, they only get the Windows blue screen(not the BSOD),the mouse pointer is there (you can move it and everything...), but there's no Windows logon box (where you type ctrl+alt+del , and enter your username and password).The problem is the same if I try to boot in safe mode...It happened on two different PCs (different hardware), and also on a Lenovo T60.
View 14 Replies
View Related
Dec 29, 2007
I get a blue screen error message?
View 6 Replies
View Related
Oct 19, 2010
I have a Prolink Hurricane 9601C Modem. It has two LED's indicating Power and Link. As of recently, the Link LED, starts to flash on and off, and all network connections get terminated. The Driver software of the Modem stops responding. I tried to unplug the network cable and re attaching it, but nothing happens.... The System will not shutdown either. Once windows logs off, I get this Blue Screen Error.A problem has been detected and windows has been shut down to prevent damage to your computer.
View 8 Replies
View Related
Jun 18, 2008
For the last three days I have been getting a blue screen error, the only thing I have done is ran Softwar inspector Secuna, and uninstalled Abobe Reader and reinstalled the updated version.Error message: A problem has been detectd and Windows has been shut down to prevent damage to your computer.KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error Screen, restart your computer. If this screen apperas again floow these steps. Check to make sure any new hardware or software is properly installed. If this is a new install ask your hardware or software manufactor for any windows updates you might need. If the problem continues, disable or remove any new installed hardware or software. Disable BIOS memory options such as coaching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer. Press F8 to select Advanced Start up Options, and then select Safe Mode.
Technical Information:
*** Stop:0x00000077 (Ox000000E,OxC000000E, Ox00000000, OxOACF80000)
Beginning dump of Physical memory.
I don't really understand this could someone please help me with this problem?
View 14 Replies
View Related
May 23, 2006
I am running XP media center 2005 and it is a pretty fresh install. All of a sudden today I am having crashes and the one blue screen I got had this code on it -
STOP: 0X0000008E(0XC000005, 0X805AE8AC, 0XA55DEBDC,0X00000000)
View 14 Replies
View Related
Mar 17, 2007
I've recently put together a PC and for the first 3 weeks it was running perfectly. Then in the past week, it started crashing completely randomly it seems. No error messages or blue screens, it just auto restarts.
On reboot, it has an error log (the following are 5 examples out of about 10 crashes so far)
Ex 1
Error code 1000008e, parameter1 c0000005, parameter2 c0384dc0, parameter3 ebf4e4ec, parameter4 00000000.
(This occurred when I was finishing an installation of iTunes..don't know if that's of significance?)
Ex 2
Error code 1000008e, parameter1 c0000005, parameter2 c038d724, parameter3 ecb494ec, parameter4 00000000.
Ex 3
Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec2dc4e4, parameter4 00000000.
Ex 4
Error code 1000008e, parameter1 c0000005, parameter2 c038c2f4, parameter3 ec94189c, parameter4 00000000.
Ex 5
Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec4da4e4, parameter4 00000000.
I've not installed any new hardware in the last week nor any major programs. I've got no spyware (according to spybot). Norton windoctor reported a missing msvcr80.dll (i realise i can't just add this .dll back into my system...plus I'm told it's a necessary .dll for office 2007 and .NET 2.0)
Any idea what my problems could be??
PS: the attached jpegs shows the errors windoctor comes up with
View 12 Replies
View Related
Jan 5, 2009
I have XP Media Center on my desktop and got a BSOD the other day. Unfortunately, I didn't copy the error code on the BSOD down. Now, whenever I try to open IE or iTunes or just about any program, the cursor just stays in the 'working' mode and the computer never does anything else. I can't even restart it via the Start menu. I have tried to do a system restore, but the pc freezes just when I click on 'next' to start the restore. I've even tried the system restore in safe mode with command prompts and got the same result.
I ran Spybot, Ad Aware and AVG in safe mode, but they did not pick up anything. Not sure if that is relevant to my problem... Is there any way I can force the BSOD so I can get an error code? Does anyone have any idea what might be causing my problems?
View 9 Replies
View Related
Jul 11, 2008
When it happens:
Usually when I play a game from Warcraft to Teamfortress 2 and once even a flash game. The sound stutters, blue screen flashes up and then computer reboots.
And now im out of ideas. Any suggestions?
View 10 Replies
View Related
Jul 15, 2005
I was away for about 2 weeks and left my computer on. Judging by the
virus check log, on the 30th June my computer crashed out. When I
returned I rebooted and set it up so that it went to the BSOD to give
me an idea what was happening.
In the last 3 days I've had about a dozen crashes. The first few went
to BSOD with various messages (page_fault_in_nonpaged_area,
driver_irql_not_less_or_equal, etc.) I looked up the message but
nothing applies, since the computer was untouched during my absence.
I thought maybe memory was corrupt - I have 3X 512MB slots filled. I've
used each memory block in turn and each time I've experienced a crash,
so I'm not sure about that any more - can all 3 be corrupted?!?
Plus I'm now crashing straight to total death now (black screen,
unresponsive, tho computer-power light still on) rather than BSOD. The
crashes come irregularly - sometimes in 5 mins sometimes in a couple of
hours. They "kind of" correspond with heavy CPU load but not always.
View 9 Replies
View Related
