I primarily use an Easycap to convert VHS tapes to digital video files, but unfortunately, I have my device plugged in, and tried installing a few drivers for it, but none of them worked. I've searched across the Internet for an EasyCap driver for Windows 8, but I couldn't even find one, and have come to the conclusion that Easycap doesn't support Windows 8 yet, unless there was something that I didn't know about.
View 3 RepliesI have a Pavilion G6-2357sa Notebook and I wanted to upgrade the sound drivers but I went on the HP website and I found out that HP doesnt support my drivers. How do I upgrade my audio drivers if isnt supported on the HP website?
View 1 Replies View RelatedMy Toshiba laptop does not let any of the function keys operate properly. When I press one, nothing happens. I have also tried holding down the FN key, to no avail. I thought this was a Toshiba issue, but after multiple customer support "experiences" who told me that the operating system was corrupted, I think it may be a Windows 8.1 issue. This happened under Windows 8 too. Toshiba has a keyboard driver for this laptop model for Windows 7, but not 8.1. Is this a common problem with Windows 8.1 (All drivers are up to date and function key support is enabled in the BIOS)
Laptop: Toshiba c55-a5285.
I have a 6 yr old Dell Dimension E520 currently running Windows 8. I tried to upgrade to 8.1 but have been denied because my processor doesn't support PAE, NX or SEE2. I've read some posts that stated that this was an issue preventing them from installing version 8. It wasn't an issue for me since 8 installed. My questions are why would this effect me now and is there a work around?
View 1 Replies View RelatedI am getting a message saying your computer doesn't seem to support any version of Windows Media Player
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: AMD A8-4500M APU with Radeon(tm) HD Graphics, AMD64 Family 21 Model 16 Stepping 1
Processor Count: 4
RAM: 5602 Mb
Graphics Card: AMD Radeon HD 7640G, 512 Mb
Hard Drives: C: Total - 583776 MB, Free - 454838 MB; D: Total - 25913 MB, Free - 3042 MB;
Motherboard: Hewlett-Packard, 184B
Antivirus: Windows Defender, Disabled
Is it necessary to disable CMS in the bios to fully utilize a UEFI install?
I'm getting conflicting messages from what I am reading, probably.
I have a Samsung SE-218 External DVD drive, and I cannot seem to access it in Windows 8.1 (though I have not had a chance to try it on any other computers yet, so there is always the possibility that something is wrong with the drive). Whenever I plug it in the light comes on and it will spin the disc for a bit, but nothing shows up in File Explorer or in Device Manager.
I've tried the command prompt command noted in this thread with no luck:
How to make empty ODD show?
a friend of mine recently brought me a notebook,Medion AKOYA 99380(s6214t). After booting and using notebook for some time,computer reported a Hard Drive error.It said:"Windows detected a hard disk problem. Back up your files immediately to prevent information loss, and then contact computer manufacturer to determine if you need to repair or replace the disk."
The HDD is pretty new and it didn't seem to have any hardware issues. However,I did a clean instal of Windows 8.1 on the notebook(normally I installed Windows on the 64GB SD Card located in the "tablet" part of the notebook,so that way a person using it can use it as a tablet,too). Everything seemed to work fine, no HDD errors from Windows etc.,but then I opened My Computer and second Hard Drive wasn't there.I thought that it's a Drive Letter problem so I went into Disk Management however it did not solve the issue.
Then I tried everything(re-formatting,changing from NTFS to other formats etc.) but it did not seem to work.But all of sudden,after doing something, I don't really remember what I did that made the Computer see it, but it finally worked,so I just started testing everything. And after I used it as a tablet only for a while,I plugged that part in the notebook again and then Windows gave me an option to Update and Restart. I was a bit afraid of how it will turn out,so I wanted to shut down and turn on for a couple of times before updating, just to see if it will cause any issues. When I was sure that it worked perfect before the update, I clicked the option to update.
After the update was finished,Windows ran extremely slow and it detected my second HDD, however not the way it should.It only said "Local Disk (D: ) but I could not access and it didn't show how much memory on it was used. I re-assigned a letter to it after a format,but it did not work. Then I shut down the notebook,pull the second hard drive out,connect it to computer with usb so windows sees it as an external hard drive,and bam,everything worked. I don't think that the HDD is the problem,nor the SATA connectors,it's most likely that the motherboards driver need an update. However,when I checked for it's name,it said "Medion AKOYA s6124t". I tried all the downloads from Medion's page,but no succes in finding a proper driver.
I have run into a problem with my Windows 8 computer once in a while, it's that my PC doesn't recognize USB ported devices as supposed to, but it does recognize things such as a wireless mouse and keyboard. Now, my question is, can I buy a wired Xbox 360 controller and connect it to my computer, and trust it to download the drivers correctly, and work like it's supposed to? I have got a new game, and really want the controller to work for it.
View 2 Replies View RelatedMy PC with Windows 8 Pro doesn't read any kind of discs. I first tried a movie then it reads, a little disc appears on the cursor which means that the disc is being read. But all of a sudden, it fails at the end and doesn't read the disc. Even a bootable disc, it just stays black with a blinking line then it fails to read it as well. No errors or messages, it just proceeds to the Windows 8 loading screen.
View 1 Replies View RelatedI'm using windows 8 pro which I upgraded from windows 7 home premium in january. After the upgrade, my e key stopped working. After another few months, more keys stopped working and now, no keys are working. What do I do?
View 2 Replies View RelatedThe AutoPlay dialog box dosn't appear when plug-in USB
When we plug in the USB device ,
windows open it automatically and never appear the option
it dosn't give me time to scan usb
how can I enable this feature
ive been having this for ages on my windows 8 acer laptop, randomly my keyboard doesnt work anymore (happend 5months ago) ive been using desktop keyboard since
View 2 Replies View RelatedI'm using Win 8 on my laptop Lenovo G580. I have some problems with it. When I restart my laptop it takes too much time to restart and sometimes all USB ports doesn't work properly, means it shows Modem, USB Mouse, Pen drive connected but doesn't work. Here is the link of Dump file on Skydrive..
[URL]
When I update Windows graphics drivers, Windows (Windows 8.1) does not save the desktop icons where I keep them, and I have to put them back where I like them,, snapshot attached.. a long time ago I had to use a separate utility to save icon positions.. I have been using desktop icons for many, many years..
How do I tell windows not to lose the icon positions when I upgrade drivers.. btw, I use Nvidia x64
When I do the graphics driver upgrades, al the desktop icons just go into the right side in a scattered order. and I have to put them back like my snapshot shows how I like them
I reinstalled my 8.1 pro (legal copy, disk been fully formatted) and it was okay for few hours. Next time im starting the laptop, my keyboard and touchpad doesnt work. I plugged USB mouse and keyboard and it works just fine. I went to device manager and besides Standart PS/2 keyboard and mouse icons there was orange triangle meaning that i have problem with drivers. I searched drivers online, but unsuccsessily.. After few hours of trying to fix it, my Standart PS/2 Keyboard turned into Unknown device and now im completely lost. Adding photo of device manager
View 9 Replies View Relatedi installed win7 on my SSD (like 22gb drive) in my asus today. Now, under my computer, it shows nothing but the SSD. it doesn't show my 500gb hard drive.. Im pretty sure its because of something i didnt do in the setup. What should i do to get it to show up? i really really really don't wanna re install windows because i got all the drivers and installed programs..
View 9 Replies View RelatedI am running Win 8.1 Pro x64. Today I noticed that the "Eject" option from the right-click menu doesn't work for either of my 2 CD-Rom drives, nor for a "virtual" drive - I get the same error message on all 3: "An error occured while ejecting [drive]".
Device Manager shows no errors, and I've tried uninstalling the drives and rebooting, but error persists.
Also, to be clear, it is NOT a physical problem with the drives, as I can open them without a problem through the buttons on the front.
Finally, if for some reason I can't fix this issue, any way to at least just DELETE the "Eject" from the context menu?
I have asus x54h laptop which is running both on windows 7 and windows 8.1 (dual boot). The problem is I could not find the required drivers for windows 8.1 in asus website. Is there any place else where I can get them?
View 2 Replies View RelatedI am facing a peculiar issues with my Vaio Machine. I use a Huwaei 3G E173 Modem for connecting Internet. I started using this in my new vaio machine too. Whenever I use the hibernate option, it tend to goto the last phase of Hibernation i.e the screen goes off, the fan starts screaming and after a moment it restarts. So, to be succinct, the new windows 8.1 machine doesn't enter in hibernation mode, if I have connected the modem. The modem has a CD Rom emulation for their proprietary software installation, so I thought it would be the cause and hence I tried to change Boot Options in UEFI BIOS to Primary, Secondary and Third as HDD, Network and External device from HDD, CD, Ext. Device.
I have also tried to disable that Power Management settings available in Driver Settings -> Hardware Settings and Un-tick the "Allow this device to Wake the computer"
P.S If I do not connect the computer to Internet with this modem and try to Hibernate it does the Job, when I use the Huwaei Modem only it creates the issue.
But nothing seems work out. Any resolution for this?
My TV tuner gets full signal when working with the battery while it gets null signal when plugged in to the AC socket whenever the battery is in. The matter is related I think to the battery saving profile. I have an ASUS K75V with i7 - 36300QM, 2.4GHz. OS Windows 8. I tried to set the setting of the active profile equal for "on battery" and "plugged in", copying the settings of the first to the second naturally. It still doesn't work. It seems that is not configurable.
Passing from working (on battery):
Process C:Program FilesASUSP4GBatteryLife.exe (process ID:2560) reset policy scheme from {512a6ac6-efc1-4441-85c9-cccf29b69cd2} to {df011ed9-9131-49b9-8090-46963cfb65ce}
To not working (plugged in):
Process C:Program FilesASUSP4GBatteryLife.exe (process ID:2560) reset policy scheme from {df011ed9-9131-49b9-8090-46963cfb65ce} to {512a6ac6-efc1-4441-85c9-cccf29b69cd2}
That is, I can allocate it one through drive management but it still doesn't show next switch on in My Computer, so I must go in an allocate it one. Otherwise it works fine. Bit tedious after a while.
Do I have to reformat it completely to regain auto allocation of a letter?
Used to be fine, but not now. A USB 3.0 Toshiba 500 gig external drive (sealed unit) doesn't have this problem.
I have an HP dv2913cl Laptop.
I always have a hard time finding drivers for it. I have a few missing, which I will try to figure out later, but my main issue right now is my video driver. I can't seem to find any drivers that work on Windows 8 x64. If I cant get it to work I'll have to go back to Windows 7 I have tried the video driver listed on the HP site and it installs fine, the picture quality/resolution is perfect but as soon as I log in and move the mouse the Metro screen goes completely blank. There is absolutely nothing on the screen. I have to hit windows key + D to get to the desktop. Once I uninstall the driver it goes back to the generic microsoft driver, the picture sucks but I can use metro no problem.
I have tried the older driver version listed on that webpage and I have tried many others. None seem to work for me. how to get it to work?? It says I have an NVIDIA MCP67M Graphics/Video Driver
I don't seem to be able to install Office 2000 on windows 8. Am I doing something wrong, or will Windows 8 not support this version?
View 5 Replies View RelatedI have a laptop with a 3200 x 1800 screen and the toolbars and menus of Illustrator and Photoshop are nearly illegible due to their minuscule size. Indesign displays normally, as does Lightroom.
On the adobe forums, two entries - Adobe Community: Photoshop CC on a High DPI display on Windows 8.1 and Adobe Community: Photoshop CC / Windows 8.1 HiDPI / Retina scaling support - suggest this is due to Microsoft not supplying required APIs (whatever these are...).
3200 x 1800 is still new, but over four months have passed since the posts on the adobe forums and the problem endures. Surely a giant such as Microsoft should already have that loophole closed? It is quite astounding that such an issue should even exist in the first place.
I have a HP 310 1120a touchsmart all in one pc and my system is saying limited touch support 2 fingers, so as you can guess my touchscreen isn't working, but was under windows 7 when i got it, sometimes it works in windows 8 but not anymore, have updated all drivers but still nothing.... How to get it running again if i can .
View 1 Replies View RelatedMy computer is NOT a touch computer.
Win 8.1 installed in guest OS Vmware Player.
What does "limited touch support with 8 Touch Points" actually mean ?
Running a Windows 8.1 Virtual machine from a LINUX host with 3-D support working. What distro are you using. (VMware player / workstation).
I've tried SUSE and DEBIAN - the VM runs perfectly except I can't get 3-D support or hardware graphics acceleration.
Under Windows as host (W7) no problem !!.
I am trying to make a DVD with UEFI/GPT support for Windows 8
I have an ISO from MSDN - Windows 8.1 Pro VL (x64) - DVD (Danish)
File Name:da_windows_8_1_pro_vl_x64_dvd_2971937.iso
[URL] .....
The SHA1 for the ISO matches the one on MSDN
SHA1: 3142B1DCBDFFC7E46ACE0E89BDB858D2C9B1F233
I used Hashtab v.5.1.23 to verify [URL] .....
If I burn the ISO and boot from the DVD created, it boot just fine in UEFI Bios.
But if I change the ei.cfg file to one of these:
[EditionID]
[EditionID]
Core
(Blank) to have the choice to install Core or Pro
[Channel]
[Channel]
OEM
Retail
[VL]
[VL]
0
0
It will not boot in UEFI Bios, it work just fine in Legacy Bios. I can use the program Rufus [URL] .... to create a bootable USB drive, this works perfect. But I would really like to know how to make this work on a DVD. Or/and what I am missing.
This is the original ei.cfg file from the ISO.
[EditionID]
Professional
[Channel]
Volume
[VL]
1
I have a Dell Inspiron 3521 with a DVD RW drive listed as "HL-DT-ST DVD+-RW GU70N" and I use Ashampoo Burning Studio 14. When I tried to burn a Video DVD after DVD authoring I get a warning saying "The inserted CD/DVD could not be detected". I tried other software too. They don't seem to detect the DVD too.
View 2 Replies View RelatedI am developing a tablet experience that will be handed out to a number of employees in a number of stores. I want to customize the start screen a certain way and basically lock it so that employees (or customers) cannot move icons around, install new apps, or run unapproved applications.
View 6 Replies View Related