I have a 6 yr old Dell Dimension E520 currently running Windows 8. I tried to upgrade to 8.1 but have been denied because my processor doesn't support PAE, NX or SEE2. I've read some posts that stated that this was an issue preventing them from installing version 8. It wasn't an issue for me since 8 installed. My questions are why would this effect me now and is there a work around?
View 1 Replies
I primarily use an Easycap to convert VHS tapes to digital video files, but unfortunately, I have my device plugged in, and tried installing a few drivers for it, but none of them worked. I've searched across the Internet for an EasyCap driver for Windows 8, but I couldn't even find one, and have come to the conclusion that Easycap doesn't support Windows 8 yet, unless there was something that I didn't know about.
View 3 Replies View RelatedI am getting a message saying your computer doesn't seem to support any version of Windows Media Player
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: AMD A8-4500M APU with Radeon(tm) HD Graphics, AMD64 Family 21 Model 16 Stepping 1
Processor Count: 4
RAM: 5602 Mb
Graphics Card: AMD Radeon HD 7640G, 512 Mb
Hard Drives: C: Total - 583776 MB, Free - 454838 MB; D: Total - 25913 MB, Free - 3042 MB;
Motherboard: Hewlett-Packard, 184B
Antivirus: Windows Defender, Disabled
I have a Pavilion G6-2357sa Notebook and I wanted to upgrade the sound drivers but I went on the HP website and I found out that HP doesnt support my drivers. How do I upgrade my audio drivers if isnt supported on the HP website?
View 1 Replies View RelatedMy Toshiba laptop does not let any of the function keys operate properly. When I press one, nothing happens. I have also tried holding down the FN key, to no avail. I thought this was a Toshiba issue, but after multiple customer support "experiences" who told me that the operating system was corrupted, I think it may be a Windows 8.1 issue. This happened under Windows 8 too. Toshiba has a keyboard driver for this laptop model for Windows 7, but not 8.1. Is this a common problem with Windows 8.1 (All drivers are up to date and function key support is enabled in the BIOS)
Laptop: Toshiba c55-a5285.
Every time I switch on my laptop I get a windows command processor black box pop up with writing in it i cant read what the writing says because it disappears quickly some one says its a virus or spyware. when i run a virus scan no problems are found and when i run a malware scan it says no problems. How can I get rid of it?
View 2 Replies View RelatedWindows 8 will not upgrade to Win 8.1 since Intel Pentium D CPU 2.80Ghz does not support PrefetchW.. processor that will work on a 0F030 Dell motherboard?
View 4 Replies View RelatedI Installed Windows 8 Pro on my PC and another Same PC of my brothers....
Both PCs are exactly same i.e. Compaq Presario SR1924IL except our RAMs and Hard Disk... He has 1.43 GB Ram and I have only 1 GB... He has 160 GB hard drive and again, I have 80 GB Hard Drive but when We installed Windows 8 Pro on our PCs the System Properties Are Different... We have Pentium D processor which in His Case is 2.80 GHz and in my case it's 2.67 GHz..
Can I run windows 8 in my INtel D101GGC mother board with intel pentium 4 processor with ati radeon Xpress 200 series video card? Where can I get drivers for my pc?
View 1 Replies View RelatedRight now I have an asus h61-le-CSM motherboard with EFI; it's a little older with a i3 2120 processor. On Friday I'm upgrading to a Gigabyte GA-Z77X-UD5H with a i7 processor.
Right now, I have windows 8 installed. I believe I purchased the upgrade version, although the receipt from microsoft in my e-mail has no mention of the word upgrade, it just says Windows 8 Pro. I am going to want to do a clean install with this stuff which I am capable of doing, however I don't know what I need to do to keep Windows. Will I be ok just re-entering my key?
My laptop is powered by an intel core i7 640m processor. I'm wishing to upgrade my system to windows 8 and i'v found, processor should be support PAE, NX, and SSE2 in windows 8 requirements page. In processor info section, PAE value is displayed as 36-bit and no any info about NX and SSE2 where can I find those information? that the i7 640m processor supports those features or not and is it windows 8 ready?
View 5 Replies View RelatedI do a lot of computer animation, and I am often wanting to set off a render overnight, where the computer thinks hard about turning wireframe triangles into pretty pictures.
Problem is I was waking up to find that my render had not proceed very far at all, and gone to sleep. If I go to power settings and tell it to 'Never Sleep' then my render makes it all the way through.
But I don't want to be a sweatshop labor boss and never let my sweet worker bee get any sleep. I want it to work till it finishes the render, and then go to sleep. That's how it used to work on my old Win XP box.
Is there a way I can set sleep to say, only kick in if cpu usage is below a certain percent?
my CPU is burning,
i have an asus laptop A42JA with Intel Core i5-460M Processor (2.53 GHz, Cache 3 MB)
some tech from BSOD forum told me it my BSOD is because overheating CPU
what should i do to lower the CPU temp? is it possible that the CPU itself is defective so it overheating?
this is temp when i do some Hotcpu test, it passed, memtest86+ passed too this is temp at idle and usually it start BSOD when i play 720p-1080p videos and opening multible tabs in instance on chrome.
I have asus x54h laptop which is running both on windows 7 and windows 8.1 (dual boot). The problem is I could not find the required drivers for windows 8.1 in asus website. Is there any place else where I can get them?
View 2 Replies View Relatedmy windows 8 x64 enterprise.
First of all Re-install is NO option WHATSOEVER. Because i have 500 + games installed. I have a masterbackup of it but i have 200+ new games I want to fix this installation before I do a new masterbackup.
The problem is I can't install nvidia drivers I got failed to install simple error. I think this is related to the processor /raminfo not showing in management computer and DXDIAG.
So I read around abit and it was said problem might be related to WMI? So I did all things suggested but I still get the error code 127 when trying to start WMI.
Recently I noticed a game that I had been playing had started to stutter and slowdown more than usual, the performance issues were to be expected as the games engine is notorious for being poorly optimized, however these occurrences were fairly rare in comparison to the issues i'm experiencing now.
It seems for the last two days the performance of said game had been dismal, where i'd get a mostly consistent frame-rate before, I now only have a stutter riddled mess.
Looking through the Event Log I noticed a entry shown as; Kernel-Processor-Power Event ID 37, the text below it shows this; 'The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report' the entry had been generated at '7:56pm' of today, which I found odd, as I believe that's when I started my game.
This had not been the only instance it seems, there were some entries from a few weeks back that show the same thing, however they were few and far in between. It seem I have 3 entries, all from today (12:00am, 3:56pm, 7:56pm) all warnings.
I don't seem to be able to install Office 2000 on windows 8. Am I doing something wrong, or will Windows 8 not support this version?
View 5 Replies View RelatedI have acer aspire v3-571g laptop with windows 8.1 x64 based OS. Processor is Intel Core i5.
To get a faster booting, i selected 2 processor instead of 1 in advanced boot option (msconfig) by mistake and now my laptop become dead slow on booting and startup.
I have a laptop with a 3200 x 1800 screen and the toolbars and menus of Illustrator and Photoshop are nearly illegible due to their minuscule size. Indesign displays normally, as does Lightroom.
On the adobe forums, two entries - Adobe Community: Photoshop CC on a High DPI display on Windows 8.1 and Adobe Community: Photoshop CC / Windows 8.1 HiDPI / Retina scaling support - suggest this is due to Microsoft not supplying required APIs (whatever these are...).
3200 x 1800 is still new, but over four months have passed since the posts on the adobe forums and the problem endures. Surely a giant such as Microsoft should already have that loophole closed? It is quite astounding that such an issue should even exist in the first place.
I have a HP 310 1120a touchsmart all in one pc and my system is saying limited touch support 2 fingers, so as you can guess my touchscreen isn't working, but was under windows 7 when i got it, sometimes it works in windows 8 but not anymore, have updated all drivers but still nothing.... How to get it running again if i can .
View 1 Replies View RelatedMy computer is NOT a touch computer.
Win 8.1 installed in guest OS Vmware Player.
What does "limited touch support with 8 Touch Points" actually mean ?
Running a Windows 8.1 Virtual machine from a LINUX host with 3-D support working. What distro are you using. (VMware player / workstation).
I've tried SUSE and DEBIAN - the VM runs perfectly except I can't get 3-D support or hardware graphics acceleration.
Under Windows as host (W7) no problem !!.
I am trying to make a DVD with UEFI/GPT support for Windows 8
I have an ISO from MSDN - Windows 8.1 Pro VL (x64) - DVD (Danish)
File Name:da_windows_8_1_pro_vl_x64_dvd_2971937.iso
[URL] .....
The SHA1 for the ISO matches the one on MSDN
SHA1: 3142B1DCBDFFC7E46ACE0E89BDB858D2C9B1F233
I used Hashtab v.5.1.23 to verify [URL] .....
If I burn the ISO and boot from the DVD created, it boot just fine in UEFI Bios.
But if I change the ei.cfg file to one of these:
[EditionID]
[EditionID]
Core
(Blank) to have the choice to install Core or Pro
[Channel]
[Channel]
OEM
Retail
[VL]
[VL]
0
0
It will not boot in UEFI Bios, it work just fine in Legacy Bios. I can use the program Rufus [URL] .... to create a bootable USB drive, this works perfect. But I would really like to know how to make this work on a DVD. Or/and what I am missing.
This is the original ei.cfg file from the ISO.
[EditionID]
Professional
[Channel]
Volume
[VL]
1
I am developing a tablet experience that will be handed out to a number of employees in a number of stores. I want to customize the start screen a certain way and basically lock it so that employees (or customers) cannot move icons around, install new apps, or run unapproved applications.
View 6 Replies View RelatedI need some info re creating restore points. In the HP Support Assistant, under updates and tune-up-change tune-up tasks, should the "set restore point" be turned on to "yes" when a tune-up is scheduled? I understand that windows 8.1 automatically sets restore points, but I don't know how or when or where the restore point info is stored. Is the HP Support Assistant "set restore points" the actual method used by Microsoft or an additional option?
View 2 Replies View RelatedI have a brand new Asus laptop that had a problem with the battery. I sent it in to Asus on an RMA and when I got it back, the only partition on the laptop was the OS. Is there something I can do so I can re-install the OS some day? I thought if I can get my activation code some way, I could download Win 8 and re-install, but I am not sure if that will even work with Windows 8.
View 9 Replies View RelatedI am using Windows Virtual PC which was a 64-Bit version I installed, I got XP Home 32-Bit installed via it perfectly and tried to install Windows 8 x64 AND THEN Windows 8.1 x64 but on both I got the BSOD (in the Virtual Machine) almost straight away saying 64-bit CPU is not supported?
I've read this may be due to not having VTx but I do as my CPU is a 3470 (Ivy Bridge) and SIW says its enabled as does BIOS
I am testing some Windows ISO's to check to make sure they are OEM and ask for product key during install but also to diagnose a WSUS Offline issue in windows 8 that reverses all updates right at the end saying there was a problem, the software creator needs a log and I ain't got time at work.
Can I disable Legacy Support, since it's for older operating systems?
View 4 Replies View Relatedhow to install the Asus' MB support software, (like Ai suite, Turbo V, etc...) i need it for OC etc... they desn't want to install in Win 8, I tried with compatibility options, but it says that mb isn't supported...
View 9 Replies View RelatedIs it necessary to disable CMS in the bios to fully utilize a UEFI install?
I'm getting conflicting messages from what I am reading, probably.
In a few weeks (I can't wait! ) I will replace my laptop with the Surface Pro.
Right now, though, I have my laptop connected to two monitors: One via VGA and other via DVI. I'm running Windows 8 Pro x64, so this all works great.
So the big question is whether it is possible to have multi-monitor support via the one-and-only DisplayPort that is on the Surface Pro? If so, what--if any--additional hardware would I need?
When I'm docked at home and using my Surface Pro as laptop, I really need to keep the functionality of using both external monitors (one is 31" and the other 29"). I would really hate to go back to only being able to use one.
