Hardware Drivers :: Processor 2.53 GHz Get Over 100 C Temp Using Hot CPU Test
Jun 21, 2013
my CPU is burning,
i have an asus laptop A42JA with Intel Core i5-460M Processor (2.53 GHz, Cache 3 MB)
some tech from BSOD forum told me it my BSOD is because overheating CPU
what should i do to lower the CPU temp? is it possible that the CPU itself is defective so it overheating?
this is temp when i do some Hotcpu test, it passed, memtest86+ passed too this is temp at idle and usually it start BSOD when i play 720p-1080p videos and opening multible tabs in instance on chrome.
View 5 Replies
ADVERTISEMENT
Aug 27, 2013
I'm new to Windows 8 and I'm having a hard time managing my way around. My windows automatically installed almost all of my drivers, but failed to recognize the coprocessor. When i open the properties it says:
The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
When i try to find the driver automatically,it fails, but i cant find them aswell.
My motherboard is ASROCK 939a8x-m, therefore it has an nvidia chipset in it. I fail to find the neccessary drivers aswell and i don't know what else to do.
View 2 Replies
View Related
Apr 17, 2014
my windows 8 x64 enterprise.
First of all Re-install is NO option WHATSOEVER. Because i have 500 + games installed. I have a masterbackup of it but i have 200+ new games I want to fix this installation before I do a new masterbackup.
The problem is I can't install nvidia drivers I got failed to install simple error. I think this is related to the processor /raminfo not showing in management computer and DXDIAG.
So I read around abit and it was said problem might be related to WMI? So I did all things suggested but I still get the error code 127 when trying to start WMI.
View 3 Replies
View Related
May 4, 2014
Can I run windows 8 in my INtel D101GGC mother board with intel pentium 4 processor with ati radeon Xpress 200 series video card? Where can I get drivers for my pc?
View 1 Replies
View Related
Sep 24, 2013
I have had Win 8 Pro up and running for about a month and I am having a continuing printing problem. I have 2 printers that I am trying to print to. An HP 4250 and a Ricoh C821DN. Both are on the network and I access them through the local IP address. They both installed fine, but half the time I cannot print to them. When I print, the print command finishes, but nothing prints and nothing is in the que.
I try printing a test page and I get an error box saying that "Test Page Failed to Print". Running through the troubleshooter only makes the printer the default printer and that has no effect. I can see the printer through my browser by typing in the IP address and everything is fine. I also have my laptop running windows 7 right next to me on the network and it prints to both printers just fine.
Sometimes Win 8 will print and sometimes it wont, often for hours at a time.
View 7 Replies
View Related
Nov 10, 2013
Went to boot up my Acer this evening to no avail. I can see it start to cycle through searching the DVD drive and see the read/right red LED light for the hard drive go on for about 5 seconds, then nothing. No BIOS test pass beep. I know that it beeps once for passing, then continues to boot.
I took the side panel off and reseated all the connections including the Mem strips. At one time I left a strip out intentionally for a continuous beep, which is what it's suppose to do.
View 8 Replies
View Related
Oct 11, 2013
My laptop is powered by an intel core i7 640m processor. I'm wishing to upgrade my system to windows 8 and i'v found, processor should be support PAE, NX, and SSE2 in windows 8 requirements page. In processor info section, PAE value is displayed as 36-bit and no any info about NX and SSE2 where can I find those information? that the i7 640m processor supports those features or not and is it windows 8 ready?
View 5 Replies
View Related
May 9, 2014
I do a lot of computer animation, and I am often wanting to set off a render overnight, where the computer thinks hard about turning wireframe triangles into pretty pictures.
Problem is I was waking up to find that my render had not proceed very far at all, and gone to sleep. If I go to power settings and tell it to 'Never Sleep' then my render makes it all the way through.
But I don't want to be a sweatshop labor boss and never let my sweet worker bee get any sleep. I want it to work till it finishes the render, and then go to sleep. That's how it used to work on my old Win XP box.
Is there a way I can set sleep to say, only kick in if cpu usage is below a certain percent?
View 2 Replies
View Related
May 28, 2014
it crashes randomly (no BSOD, just a total crash with a weird lag sound). And when it does, I restart it and I check my CPU temp ... it's around 55C so I guess the problem ain't overheating.
Weird thing is it crashes when I'm not doing much (listening to music on Itunes, browsing on chrome) ... I don't play much games, but it never crashed during one.
Asus Sabertooth 990FX R 2.0 with AMD FX 9590 8core 5ghz
Corsair H60
2 8gb Patriot 1600mhz DDR3 ram
ATI Radeon HD 4600
Windows 8.1
So yeah I know my graphic card is old ... could it be the reason?
View 9 Replies
View Related
Oct 19, 2013
I have a 6 yr old Dell Dimension E520 currently running Windows 8. I tried to upgrade to 8.1 but have been denied because my processor doesn't support PAE, NX or SEE2. I've read some posts that stated that this was an issue preventing them from installing version 8. It wasn't an issue for me since 8 installed. My questions are why would this effect me now and is there a work around?
View 1 Replies
View Related
Dec 22, 2013
I have HP pavilion G6 laptop running windows 8.1. Found under c:windows emp a folder with a very long alphanumeric "name". On opening this appears to be an OS installation i.e. it has the following files included:
Program Files
Program Files (x86)
Program data
Sources
Users
Windows
Being in the temp folder I presume can be deleted. However I cannot delete this folder. I get the message that says I require permission from the trusted installer (??) to make changes to this folder.
How do I delete this folder ??
View 4 Replies
View Related
Mar 4, 2014
Every time I switch on my laptop I get a windows command processor black box pop up with writing in it i cant read what the writing says because it disappears quickly some one says its a virus or spyware. when i run a virus scan no problems are found and when i run a malware scan it says no problems. How can I get rid of it?
View 2 Replies
View Related
Feb 24, 2014
When I install stuff like the Microsoft .NET Framework, and other things, I noticed a folder being temporarily created on my External HDD 2 TB . I guess since it's the largest partition with the largest free space Windows is using it for temp downloads or extraction of MSI / EXE files.
How can I disable Windows from touching that drive? it is very slow I want all temp stuff copied on my SSD
View 6 Replies
View Related
Dec 11, 2013
I am unable to delete winstore file in %temp% folder how delete the winstore file in temp folder. OS Windows 8.1 Enterprise Edition x64
View 3 Replies
View Related
Jul 5, 2014
In my brothers rig has the GMA x4500 as video card integrated so he has win 8 and he installed a custom modded driver to access to control panel and to config openGl and other things now he was asked to enable test mode before installing that driver and disable driver signing after he finished every thing he disabled back test mode but the system is keeping using it and the watermark stays
at the bottom I tried these
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF
with no sign of being removed
View 9 Replies
View Related
Jan 9, 2014
I have an HP laptop (G6-2005AX) with the following configuration
CPU: AMD A8-4500M APU 4-cores with Radeon HD Graphics
GPU: AMD Radeon HD 7640G + 7600M Dual Graphics
Memory : 8 GB 1600Mhz DDR3 RAM (2x4GB in dual channel)
Mainboard: Hewlett-Packard 184A
Hard Drive: Seagate ST500LM0 12 HN-M500MBB 500GB 5400RPM
I'm using AVG free 2014 as AV and did a full system scan - no viruses.
The problem is that Windows 8.1 (64bit, pro) boots up really slow - taking upto 6-7 minutes. After it boots up and, well I don't know exactly how to put this - let's say "settles down", everything works as normal. After getting past the password screen, clicking on the desktop tile takes around 1-2 minutes to boot into desktop, after that opening any program (Chrome, MS-Word etc) will take 3-4 minutes - but after it has "settled", everything works as it should.
Also, another curious problem I am facing is that once in a while, when typing my password and logging in, Windows boots into a temporary profile (no apps, blank desktop) and a message appears on the notification area that "windows has logged you on with a temporary profile" or something similar - I need to sign out, then after I sign in again, my real profile gets loaded.
I thought the problem of logging into a temp profile, I thought was that the PC was not verified - I verified it by going to Change PC settings --> Accounts. But after 4-5 days, I see the option of verifying the PC again.
View 1 Replies
View Related
Jul 24, 2014
I am using a Surface 2 tablet which is RT 8.1. Is there a program to clean up/delete temporary files. I have tried Ccleaner but it says this program will not work on this machine. I have tried to find a way to make it work but could not find a solution. That's why I am wondering if there is a program "somewhere" to clean up those temp files.
View 1 Replies
View Related
May 26, 2014
Recently I noticed a game that I had been playing had started to stutter and slowdown more than usual, the performance issues were to be expected as the games engine is notorious for being poorly optimized, however these occurrences were fairly rare in comparison to the issues i'm experiencing now.
It seems for the last two days the performance of said game had been dismal, where i'd get a mostly consistent frame-rate before, I now only have a stutter riddled mess.
Looking through the Event Log I noticed a entry shown as; Kernel-Processor-Power Event ID 37, the text below it shows this; 'The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report' the entry had been generated at '7:56pm' of today, which I found odd, as I believe that's when I started my game.
This had not been the only instance it seems, there were some entries from a few weeks back that show the same thing, however they were few and far in between. It seem I have 3 entries, all from today (12:00am, 3:56pm, 7:56pm) all warnings.
View 8 Replies
View Related
Apr 7, 2013
I have a small 64Gb SSD boot drive C:
I installed Windows ADK to enable EasusToDo imaging software to create a boot disk.
This has left 3 folders about 3Gb in size in my c:usersmeappdatalocal emp folder
I have therefore very little free space left on the C drive.
The folder attributes are read only.
I as an administrator user have full access rights (confirmed in folder Properties) but when I try to delete the folders the error message asks for permission from me to delete. I give this permission, then it refuses, stating Try Again as it need permission from me.
This computer does not recognise boot CDs even though the BIOS order is set correctly. I was hoping to remove files using an Ubuntu live boot CD.
Windows Disk Cleanup utility just stalls - presumably it also cannot delete these files.
View 3 Replies
View Related
Nov 25, 2013
I have a problem with Windows 8. This morning when I went to check my ASUS Zenbook laptop, the PC wouldn't access the network, even tho I could see our home network was working. I did a hard reboot and returned several minutes later to find I had been logged in under a temp password and all the desktop files I had were in the trashcan. Here's the error message that popped up in the lower right of the task bar:
"You've been signed in with a temp profile. You can't access your files, and files created in this profile will be deleted when you sign out. To fix this, sign out and try signing in later. Please see the event log for details or contact your system admin."
When I try logging out and then back in, I get the same problem. One other note: During the login procedure, this text appears in the bottom right of the screen:
"Windows Update. Your PC will restart in 2 days to finish installing important updates."
View 4 Replies
View Related
Mar 1, 2014
Windows 8 will not upgrade to Win 8.1 since Intel Pentium D CPU 2.80Ghz does not support PrefetchW.. processor that will work on a 0F030 Dell motherboard?
View 4 Replies
View Related
May 22, 2013
On my other pc's vista and win 7 while the computer is booting I can tap f12 to get into a temp boot page (for running live cd's and such). I cannot find this option on my dell 660 running win 8, how I can get to the temp boot screen?
View 5 Replies
View Related
Mar 27, 2013
I'm trying to run MEMTEST86 to test some memory which I suspect is bad so I can RMA it. I have 2x kits of 8GB DDR3 memory. Since I put in the second kit my PC has randomly been rebooting with no onscreen errors. I took that 8GB kit out and now it doesn't reboot anymore. But in order to have it RMA'd Corsair requires me to provide Memtest results.
Anyway, my PC doesn't have an optical drive so I have used memtest's USB Boot installer thing to create a bootable USB stick and plugged that in.
I am running Windows 8 and an Asus P8Z77-M Pro motherboard.
When I go in the BIOS the USB drive is detected there, it is a Lexar drive. If I set my boot order to be USB -> then my SSD it doesn't boot from the USB at all, it just goes straight to booting into Windows.
If I just tap F8 whilst booting to manually choose what I want to boot from I see the Lexar USB stick in there but if I choose it I start to see that Windows 8 blue dot rotating loading thing, then it just freezes in place and nothing happens. Neither the USB or Windows boots at that point and I have to manually reboot the PC.
Something of note in order to get Windows to boot normally I can't specifically choose my SSD as the boot device, I have to choose the uhh..I think it's called Windows Boot Loader or something like that in the BIOS.
View 9 Replies
View Related
May 23, 2014
I Installed Windows 8 Pro on my PC and another Same PC of my brothers....
Both PCs are exactly same i.e. Compaq Presario SR1924IL except our RAMs and Hard Disk... He has 1.43 GB Ram and I have only 1 GB... He has 160 GB hard drive and again, I have 80 GB Hard Drive but when We installed Windows 8 Pro on our PCs the System Properties Are Different... We have Pentium D processor which in His Case is 2.80 GHz and in my case it's 2.67 GHz..
View 9 Replies
View Related
Mar 4, 2013
Is there a way to change what temp is being displayed in the notification area? In mine, it showing 31 degrees which is associated to Temp1 and HD1...being both are the same. I would like it to display my CPU temp.
View 1 Replies
View Related
Jul 4, 2013
The Windows 8 starts it seems that i loose the permissions to the temp folder. As a result some applications using that folder to launch (for example Google drive) fail giving me an error. Another example are some installation files not starting because the temp folder cannot be used.
So, i have always to go to temp folder and manually set the permissions to have all working.
View 5 Replies
View Related
Aug 12, 2014
I have acer aspire v3-571g laptop with windows 8.1 x64 based OS. Processor is Intel Core i5.
To get a faster booting, i selected 2 processor instead of 1 in advanced boot option (msconfig) by mistake and now my laptop become dead slow on booting and startup.
View 2 Replies
View Related
Oct 7, 2014
My friend is a coder and he said he has to have the Test Mode on to test some stuff but that he's annoyed by the watermark ...
All good so far, we ran the utility caled My WCP Watermark Editor and removed it successfully. But, later on he changed his display language from English to native and the watermark was back (in the native language). We tried using the My WCP Watermark Editor again but it gave an error every time, no matter what we tried.
It was basically like that; install the REG change to be able to take ownership of files (Take Ownership of a File, Folder, Drive, or Registry Key in Windows 8).
Then copy the shell32.dll.mui from the %WINDIR%System32En-US (or in the native language in my friend's case) and open it with the Resource Hacker (Resource Hacker).
Find a certain string and delete the entry that can be seen in the watermark. Then copy the basebrd.dll.mui from the %WINDIR%BrandingBasebrden-US folder and edit it with the Resource Hacker, find certain string and remove it.
Then overwrite the files with the changed ones (that's why the "take ownership" REG change was needed). After that we uninstalled the REG and rebooted.
After that I run mcbuilder.exe and after a couple of seconds it just closed the CMD screen.
The watermarks are gone - what I'd like to ask is:
Did I do right by running mcbuilder after the reboot or should I do it before?
Is this safe? Is it likely that it could cause any system unstability or whatsoever in the future? Or are we perfectly fine?
View 3 Replies
View Related
Aug 30, 2012
I have to run with driver signature enforcement turned off permanently as I use an AMD switchable graphics laptop, and it is not supported by AMD and am forced to run usermade drivers with no signature. How can I remove this watermark without messing with Windows version displayed in winver?
To add to this, I used MyWCPWatermark to remove the Test Mode text after I activated. Now I am activated with the Windows version and build number text still on the bottom right of the screen. I can't use MyWCP anymore, it just asks if I am on Windows 8 beta.
View 7 Replies
View Related
Jan 28, 2013
Right now I have an asus h61-le-CSM motherboard with EFI; it's a little older with a i3 2120 processor. On Friday I'm upgrading to a Gigabyte GA-Z77X-UD5H with a i7 processor.
Right now, I have windows 8 installed. I believe I purchased the upgrade version, although the receipt from microsoft in my e-mail has no mention of the word upgrade, it just says Windows 8 Pro. I am going to want to do a clean install with this stuff which I am capable of doing, however I don't know what I need to do to keep Windows. Will I be ok just re-entering my key?
View 9 Replies
View Related
Nov 2, 2013
My system sounds work fine: if I navigate to the folder c:windowsmedia and double-click on a particular sound it plays correctly. However, if I go to Control PanelSound and select the "Sounds" tab none of the system sounds responds when I click on the green "Test" button.
View 3 Replies
View Related
