Using Macrium But Get Message Clone Failed
Oct 8, 2011
I've wanted to clone a drive. I have just installed a WD20EARX (J:/), but after only a couple of seconds, I get the following Error message: Failed to prepare operations. Error code: 10 'File system error is found' with extended code: 458,774 'Block bitmap corrupted'" module="10" time="1318002352".I've checked out the FAQs and that's not helped.I have also tried using Macrium, but get the message: Clone failed - - VerifyFileSystem failed.I have checked through Device Manager and all appears to be OK in there. Ithe new drive is showing up in there OK, but when I check up in Start > Computer, it's not showing up in there.Anyone any idea what it all means and simple step-by-step instruction of how to get around it. I am using Windows 7 and the new drive, 2TB, is formatted to NTFS
View 2 Replies
ADVERTISEMENT
Feb 20, 2012
At the moment I have two Sony Vaio laptops. My old one has an 80 GB hard drive partitioned as a C and D drive and has Windows XP. My new one has a 320 GB hard drive in one partition C running Windows 7 64 bit. I have several backups on a Freecom 320 GB external hard drive created with Macrium Reflect free edition.
The latest back-up I have on the Freecom is the complete contents of my new computer ammounting to about 72 GB.
Would it be possible for me to copy what is on the Freecom to my old computer in order to create a clone of my new computer? I basically want to have this as a backup in case the new laptop croaks. If this is possible would I have to prepare the old drive in any way such as wiping it clean or re-partitioning it or would the stuff on the Freecom do that as it copied?
View 9 Replies
View Related
Jul 14, 2011
how do i stop this mesage auth remote download failed wins 7 ultimate 64 bit o/s message comes up on boot
View 2 Replies
View Related
Sep 18, 2012
Let me start by saying that I'm a neophite when it comes to issuses of anything other than turning the computer on. It appears to me that when a Microsoft update was installed it obviously changed something. I keep getting an error message that reads:[CODE]
View 1 Replies
View Related
Oct 31, 2012
How can I get into my laptop? I have a Windows failed to start error message. Asking me to inser my windows installation disc which didn't come with laptop
View 2 Replies
View Related
Jun 27, 2009
I have just managed to crash Windows Explorer and have receivedthe following error message (no error code provided);"The remote procedure call failed and did not execute"Whenever I try and double left mouse click on computer, control panelor any other windows processes I receive the above error message.I was wondering if any other members have received this sameerror message?
View 6 Replies
View Related
Dec 16, 2012
Every time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do
View 2 Replies
View Related
Nov 27, 2012
I have 4 Win 7 computer that will not up-date, Windows shows 21 updates available (all 4 computers show same), upon reboot system says "Updates Failed". Each computer upon reboot dsiplays an error message saying the "updates failed". rinse - repeat.This started with one computer about a month ago, I now have 4 that are doing it. I have scanned with Combofix, Superantispyware, Rkill, Symamtec's Endpoint, eSet on-line, Panda on-line, Malwarebytes, JRT, ADWcleaner, CCleaner, FSS, awsMBR, and tried the MS FIXIT.
I also tried this procedure:
1) Disabled Windows update Service
2) Deleted all files in c:\windows\softwaredistribution\datastore and deleted files in c:\windows\softwaredistribution\download
4) 3) Downloaded and installed the most up to date Windows Update Agent.
5) Restarted Windows Update Agent, made sure Workstation and Background Intelligent Transfer Services were running.
6) Ran the MS Mr. Fixit program to repair update issues.
7) Ran the Windows update. 21 updates to install (as always).
8) Rebooted
9) Guess what, same issue!
I tried this on ALL 4 COMPUTERS I have with this SAME issue, 2 of which are on the same domain, the other two are laptops. ALL 4 FAILED. All four (4) again show the need to receive 21 updates. All 4 were again ran through the update process, all four (4) again failed post re-boot to take the updates (message stated �up-dates failed� post re-boot)
View 8 Replies
View Related
Aug 9, 2011
The error message: the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details.the event logs of the error:
theres 3 errors:
1/3:
Activation context generation failed for "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorNVMonitor.exe".Error in manifest or policy file "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorMicrosoft.VC80.MFC.MANIFEST" on line 4. Component identity found in manifest does not match the identity of the component requested. Reference is [code].....
i have an intel core i7 running 64 bit if that makes a difference.
View 9 Replies
View Related
Nov 22, 2012
I am running Windows 7 Ultimate x64, and have been for years. I have had no problems previously that I was unable to fix.
This morning when starting up my pc I got the error message "Failed to connect to a windows service" In addition it has defaulted to windows classic theme and I can not re enable Aero.
I looked at the Event log but it is simply beyond my level of understanding how to address the errors. Also all errors shown seem to be relativity longstanding/ recurring.
View 3 Replies
View Related
Sep 28, 2012
After having a few probs lately every time I restart I get message "Megakey failed to create empty document", some time ago I loaded Mega-upload for films and this is some sort of link to it,but if I uninstall mega-upload my internet explorer 7 wont conect
View 1 Replies
View Related
Nov 25, 2012
I just recently built a new computer and i decided to see how much more speed i could get out of my processor with amd overdrive's autoclock feature. it brought it from 3.1 GHZ to 3.2, and it wasn't stable so i just reset the settings back to default. I also tried overclocking my graphics card with MSI afterburner and it wasn't stable or worth the tiny bit of extra fps so i clicked reset to default. now whenever i shutdown my pc and turn it back on it says "overclocking failed" and then it takes me to my bios screen where it says that settings have been changed in the advanced section in my bios, so i go there and click the reset to default button.when i boot into windows i get weird lines and purple squares and then the screen flashes and it says that my display drivers have stopped working. so my computer is unusable and i have spent alot of money building it and i don't know what to do!
View 5 Replies
View Related
Jan 15, 2013
I notice that Macrium has a lot of updates. Should I make a new disc and a new image with each update. I try to read the contents of the update but it is difficult to understand at times. I image occasionally and keep sensitive data on removable media.
View 4 Replies
View Related
Oct 13, 2012
just installed free macrium Windows 7 64 bit backup. created image bu on external hd. created both pe and linux recovery cds. inserted cd, shut down system; turned on system, no boot from either cd; windows came up normally.
View 3 Replies
View Related
Nov 1, 2012
I saw that the free MR edition have an update! I have build 5154 of v5.0. My question is: if I update it to the latest v5.1 , the images and the Bootable Rescue Media I created before will still work?
View 3 Replies
View Related
Jan 16, 2013
Something has changed in the bios I guess. No matter how I set the boot order it will not boot the disc.
View 7 Replies
View Related
Apr 28, 2012
I just installed an Intel 330 120G SSD in my netbook. Macrium Reflect worked brilliantly to clone and resize the partiions to fit from a larger 250G hard drive to the new 120G SSD.After swapping in the new SSD, I wanted to make an image of the completed install but Reflect balked for the C: drive with an "MFT error" and a suggestion to run ChkDsk.I did as instructed and ChkDsk returned a bunch of errors but I suspect they are not really errors but rather unexpected results from an SSD. There were about ten of these...CHKDSK is verifying files (stage 1 of 3)... 0 percent complete. (0 of 151808 file records processed)Attribute record (128, "") from file record segment 1536 is corrupt.
View 7 Replies
View Related
Mar 25, 2010
This tutorial shows the complete imaging and recovery cycle using free Macrium as the example.
View 0 Replies
View Related
Aug 24, 2012
my son set up a backup strategy. He has a Seagate GoFlex 2TB network drive that he planned to do backup with. It comes with software to backup files and folders, but not the system image. He has Windows 7 home which apparently can't do backup to a network drive. I see Macrium is recommended here. Can the free version backup and recover a system image to a network drive?
View 1 Replies
View Related
Nov 28, 2012
what Is the best "free" version of macrium reflect.
View 1 Replies
View Related
Jun 12, 2012
I have imaged my neighbours Netbook with Macrium Reflect. Since it has no DVD burner, I want to create a bootable Macrium (Linux) recovery media on a thumb drive. Not sure how to proceed.
View 6 Replies
View Related
Aug 4, 2012
previously I used Macrium Reflect to do an image of my HP laptop's hard disk, and yesterday, i tried to recover using the image, everything was successful, however, I cannot access the recovery partition anymore. Pressing F11 while booting does not boot into Recovery Manager anymore like it previously did, instead it went straight into booting windows... and i tried to access the folders inside the recovery partition, it says that the files are corrupted and unreadable.
View 8 Replies
View Related
Dec 16, 2012
Attempting to restore an image to my dad's computer as a test in case of a crash. He is running Win 7 Pro 64bit and I have made the Macrium rescue CD which finds the images and reports a successful operation. However, when I try to start the new disk, it gets to the windows flags screen and goes nowhere for an hour or more.
I have used the exact same procedure with my Win 7 Pro 32bit computer and it all works fine.
View 5 Replies
View Related
Sep 19, 2011
Created an image of my C drive and System Reserved with Macrium. I want to change my partitions prior to restoring my image. Is the easiest to just use my Windows 7 disk?Have a 500GB hard drive on my laptop and want to change the partition sizes.
View 2 Replies
View Related
Mar 13, 2012
I recently built a pc and all is well. Clean install of Windows 7 HP 64. For the first couple of days I was in and out of the system as the default admin (user you are asked to create during Windows 7 install). It wad during this time I installed macrium reflect free 5. I images the system after getting all the drivers in and then set up a scheduled backup for 7am each day. Worked fine.
Now I have created a normal user for me without admin privilege (for security reasons) which will be my day to day login. However this morning macrium failed to run the scheduled image. I was logged in as me, the low lvl user, not admin. The log file had an error about being unable to access adminxml file
I'm guessing this is because I installed macrium whilst an admin? Additionally I created the xml file whilst admin and then turned it into a schedlue whilst admin. However the xml and schedule are both set to run as admin with the admin password typed in.
Macrium is available to me as a normal user but when I launch it I'm asked for the admin password. Just trying to give as much info as poss.
View 8 Replies
View Related
Aug 7, 2012
I recently purchased a new hard drive, and to this point have been utilizing Macrium only for backup images.
What I'm trying to do is copy a working image of my old hard drive including the OS Xp, to the new hard drive, but the pc won't boot with the copy installed on the new hard drive!
View 2 Replies
View Related
Jan 15, 2013
I just noticed that the default location for the xml files it creates with each image is on my C:.... My Documents/Reflect.I always just let it choose until I came to the image, which is on an external drive.Should these be on my external drive, and can I move them safely so they will be recognized, in case my C: fails?In other words, can I move them and Macrium will find them? Do I have to do a step after I move them
View 6 Replies
View Related
Feb 23, 2011
I know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
View 9 Replies
View Related
May 23, 2012
I built some computers for the local Verizon stores a while back and the guys have pretty much destroyed them. I would like to set up one system and clone the drive so that all four systems are identical. Each system is completely identical to the next as far as hardware goes. Can anyone suggest a high quality program to duplicate the first drive that is simple and quick? Time is very important as the systems cannot be down for to long.
View 9 Replies
View Related
Sep 14, 2012
Because my current SSD has been giving me way too many problems mainly with BSODing randomly, and after reading that lots of people have similar reliability problems with the same model, I want to get a new SSD soon. However, I want to save time and just be able to clone exactly what I have onto the new drive.
I've heard that cloning from a HDD to SSD will cause problems. However I am talking about SSD to SSD.
The drive I plan on buying will still use a Sandforce controller, and will be the same capacity. Specifically my current one is the Mushkin Chronos Deluxe 240gb and I want to get the Kingston 3K HyperX 240gb.
The Kingston SSD I plan on getting should come with software that lets me clone, which I think is the Acronis one. What do I need to do to successfully and seamlessly transition my entire system onto the new SSD?
View 6 Replies
View Related
May 24, 2011
I got a laptop with tons of data and application, so I have got a bigger hard drive, i don�t really want to copy the data over nor reinstall the apps on the new HDD. Therefore can anyone suggest a way to clone the HDD and deploy on to the larger HDD and hopefully pop it in the laptop and off i go..
Now, this laptop is on a company domain so I don�t think any cloning tool will put it back on the domain so how does cloning work with domain laptops?
View 7 Replies
View Related
