Imaging With Free Macrium
Mar 25, 2010This tutorial shows the complete imaging and recovery cycle using free Macrium as the example.
View 0 Replies
ADVERTISEMENT
What Is Best 'free' Version Of Macrium Reflect
Nov 28, 2012what Is the best "free" version of macrium reflect.
View 1 Replies View RelatedMacrium Reflect Free Image Restore
Dec 16, 2012Attempting to restore an image to my dad's computer as a test in case of a crash. He is running Win 7 Pro 64bit and I have made the Macrium rescue CD which finds the images and reports a successful operation. However, when I try to start the new disk, it gets to the windows flags screen and goes nowhere for an hour or more.
I have used the exact same procedure with my Win 7 Pro 32bit computer and it all works fine.
Use Macrium Reflect Free To Clone Laptop?
Feb 20, 2012At the moment I have two Sony Vaio laptops. My old one has an 80 GB hard drive partitioned as a C and D drive and has Windows XP. My new one has a 320 GB hard drive in one partition C running Windows 7 64 bit. I have several backups on a Freecom 320 GB external hard drive created with Macrium Reflect free edition.
The latest back-up I have on the Freecom is the complete contents of my new computer ammounting to about 72 GB.
Would it be possible for me to copy what is on the Freecom to my old computer in order to create a clone of my new computer? I basically want to have this as a backup in case the new laptop croaks. If this is possible would I have to prepare the old drive in any way such as wiping it clean or re-partitioning it or would the stuff on the Freecom do that as it copied?
Macrium Free 5 Couldn't Create Image
Mar 13, 2012I recently built a pc and all is well. Clean install of Windows 7 HP 64. For the first couple of days I was in and out of the system as the default admin (user you are asked to create during Windows 7 install). It wad during this time I installed macrium reflect free 5. I images the system after getting all the drivers in and then set up a scheduled backup for 7am each day. Worked fine.
Now I have created a normal user for me without admin privilege (for security reasons) which will be my day to day login. However this morning macrium failed to run the scheduled image. I was logged in as me, the low lvl user, not admin. The log file had an error about being unable to access adminxml file
I'm guessing this is because I installed macrium whilst an admin? Additionally I created the xml file whilst admin and then turned it into a schedlue whilst admin. However the xml and schedule are both set to run as admin with the admin password typed in.
Macrium is available to me as a normal user but when I launch it I'm asked for the admin password. Just trying to give as much info as poss.
Hp Pavilion Dv6 Imaging Drivers For Windows 7 Free Download
Dec 26, 2012m webcam is not wrking no matter what i do.... i have done everything accept pull it apart... but i have recely gotten my comp back and the harddrive is now new... now my com wont show webcam fee to anyone but i can recienve it, i can hear theother person but they cannot hear me...
View 1 Replies View RelatedImaging A NEW OS To Ssd?
Oct 8, 2011my old hard drive that has been my OS drive for years wont cut it.I have an image of my OS but i don't know how to 'image' or install it on the SSD without my cd drive.
View 2 Replies View RelatedRe-imaging A SSD?
Apr 16, 2011I have a Intel 320 120GB SSD that I just installed last Tuesday. Everything went well with loading a image on it from my spinning HDD. Offset is correct and thdrive is running well.I got up the other morning to find that somehow Windows Auto Update had been turned on and the system had restarted after Win Update had downloaded & installed 18 updates without my permission.So today I re-loaded that original image I had used on Tuesday to get rid of the 18 updates (Whether I do them in the further is u to me not MS).This started me thinking about loading a image on a SSD drive.
1) Should I first run the Clean All command to wipe the drive before loading a image on it?
2) What effect does re-imaging a SSD have on the data, partitions and files that are already on the drive?
The program I use is Acronis TI 2011 that they say has full SSD support. But what does that really mean. During the re-image TI deletes all partitions and then recreates them as to what is contained in the image, even if they are the same.Reading some reports about SSDs deleting partitions & formatting the speed of the SSD was reduced by just deleting a partition and then recreating it and wasn't reduced by just formatting it. In fact formatting it seemed to improve the performance.So now I'm wondering Should I go back and format or run the Clean All command and then re-image the drive with that original image.
Macrium Lost Updates
Jan 15, 2013I notice that Macrium has a lot of updates. Should I make a new disc and a new image with each update. I try to read the contents of the update but it is difficult to understand at times. I image occasionally and keep sensitive data on removable media.
View 4 Replies View RelatedImaging From SSD To Hard Drive?
Jan 12, 2012I've just ordered an SSD for one of the laptops, meaning I'll have a nice 7200 RPM hard drive sitting unused.
My main desktop is a wonderful mini-ITX system with a single M4 SSD. It is currently backed up, along with all the laptops, to an Asus Windows Home Server machine, so I'm fairly confident about my data integrity in case of failure. But realizing that one can never be too safe with the primary desktop, and as the little Antec case has room for a second 2.5 inch drive, it occurs to me that the now-superfluous hard drive could be installed into the desktop and used for periodic (daily?) imaging.
The SSD has the usual mysterious 100 MB recovery partition and a single C: partition for the Windows 7 x64 Ultimate machine.
There's a lot of talk about moving from hard drive to SSD, but going the opposite direction just isn't discussed. Guess this is an odd situation.
So: would I have any alignment issues or other potential snags in imaging my SSD to a hard drive? Would the usual ideally-free software solutions such as Macrium or EaseUs be appropriate for this task?
Macrium Recovery Cd Won't Boot?
Oct 13, 2012just installed free macrium Windows 7 64 bit backup. created image bu on external hd. created both pe and linux recovery cds. inserted cd, shut down system; turned on system, no boot from either cd; windows came up normally.
View 3 Replies View RelatedMacrium Reflect Update
Nov 1, 2012I saw that the free MR edition have an update! I have build 5154 of v5.0. My question is: if I update it to the latest v5.1 , the images and the Bootable Rescue Media I created before will still work?
View 3 Replies View RelatedMacrium Boot CD Won't Load
Jan 16, 2013Something has changed in the bios I guess. No matter how I set the boot order it will not boot the disc.
View 7 Replies View RelatedSSD, ChkDsk And Macrium Not In Harmony
Apr 28, 2012I just installed an Intel 330 120G SSD in my netbook. Macrium Reflect worked brilliantly to clone and resize the partiions to fit from a larger 250G hard drive to the new 120G SSD.After swapping in the new SSD, I wanted to make an image of the completed install but Reflect balked for the C: drive with an "MFT error" and a suggestion to run ChkDsk.I did as instructed and ChkDsk returned a bunch of errors but I suspect they are not really errors but rather unexpected results from an SSD. There were about ten of these...CHKDSK is verifying files (stage 1 of 3)... 0 percent complete. (0 of 151808 file records processed)Attribute record (128, "") from file record segment 1536 is corrupt.
View 7 Replies View RelatedInstall Imaging Device?
Aug 22, 2011i want install imaging device for my web cam
View 5 Replies View RelatedImaging Device Is Missing
Nov 11, 2011my imaging device is missing. not listed in the device manager sony vaio vpceg25yc. can i reinstall it back?
View 1 Replies View RelatedUse The Disk Imaging Tool For Windows 7?
May 24, 2012Is it possible to use the disk imaging tool for Windows 7 and provided that the hardware platform is exactly the same, use that same image to restore a second machine?
View 2 Replies View RelatedUsing Macrium But Get Message Clone Failed
Oct 8, 2011I've wanted to clone a drive. I have just installed a WD20EARX (J:/), but after only a couple of seconds, I get the following Error message: Failed to prepare operations. Error code: 10 'File system error is found' with extended code: 458,774 'Block bitmap corrupted'" module="10" time="1318002352".I've checked out the FAQs and that's not helped.I have also tried using Macrium, but get the message: Clone failed - - VerifyFileSystem failed.I have checked through Device Manager and all appears to be OK in there. Ithe new drive is showing up in there OK, but when I check up in Start > Computer, it's not showing up in there.Anyone any idea what it all means and simple step-by-step instruction of how to get around it. I am using Windows 7 and the new drive, 2TB, is formatted to NTFS
View 2 Replies View RelatedMacrium To Backup To A Network Drive?
Aug 24, 2012my son set up a backup strategy. He has a Seagate GoFlex 2TB network drive that he planned to do backup with. It comes with software to backup files and folders, but not the system image. He has Windows 7 home which apparently can't do backup to a network drive. I see Macrium is recommended here. Can the free version backup and recover a system image to a network drive?
View 1 Replies View RelatedDifference Between Cloning And System Imaging?
Nov 25, 2012what is the difference between cloning and system imaging?
View 9 Replies View RelatedMacrium Restore From USB Thumb Drive.
Jun 12, 2012I have imaged my neighbours Netbook with Macrium Reflect. Since it has no DVD burner, I want to create a bootable Macrium (Linux) recovery media on a thumb drive. Not sure how to proceed.
View 6 Replies View RelatedCannot Access HP Recovery (F11) After Using Macrium Reflect?
Aug 4, 2012previously I used Macrium Reflect to do an image of my HP laptop's hard disk, and yesterday, i tried to recover using the image, everything was successful, however, I cannot access the recovery partition anymore. Pressing F11 while booting does not boot into Recovery Manager anymore like it previously did, instead it went straight into booting windows... and i tried to access the folders inside the recovery partition, it says that the files are corrupted and unreadable.
View 8 Replies View RelatedDocument Scanning And Imaging Software
Mar 1, 2012I'm looking for a document scanning software (of course FREE (if available)) to scan in my monthly bills using the automatic document feeder. Once they are all scan in to be able to place them in order. For example my elect bill is 3 pages. Therefore, if I scan it in with all the other bills, and then review it, I would like to put page 3 with the elect bill and not at the bottom of the pile.
View 1 Replies View RelatedHow Install Device Manager Imaging
Nov 6, 2011how install imaging in the device manager
View 2 Replies View RelatedNo Imaging Devices Available Under Device Manager?
Aug 26, 2012I cant get my webcam to work every time I go to device manager, I don't see "imaging devices" and it keeps saying webcam not found.
View 2 Replies View RelatedWindows 7 System Imaging Software Effectiveness?
Sep 9, 2011I am preparing to replace my primary hard drive. The existing drive has limited space and there are indications that it may not last much longer. I have created a system image on another storage drive and a recovery disk using the software that is built in to windows 7. Is this an effective way to replace my hard drive? Is the windows 7 software reliable?
View 5 Replies View RelatedChange Partitions Prior To Macrium Restore?
Sep 19, 2011Created an image of my C drive and System Reserved with Macrium. I want to change my partitions prior to restoring my image. Is the easiest to just use my Windows 7 disk?Have a 500GB hard drive on my laptop and want to change the partition sizes.
View 2 Replies View RelatedRe-Imaging Taking Too Long, Computer Upgrade?
Jun 18, 2012I recently upgraded my computer with a new motherboard, processor, RAM, and video card. Before I did this, I installed a second fully functional 1 TB internal hard drive just to hold the system image and my important documents. I made a system image using the native software that was available on Windows 7.To be clear, I made a 143 GB system image from my first 1 TB internal hard drive and put it on the second 1 TB internal hard drive. I also moved my important documents over to the second hard drive. (The second drive was completely formatted and turned into a Basic drive beforehand.)After installing the new components, I wiped my first hard drive, deleting all partitions on it, but I forgot that I had one more set of folders that I forgot to move over to the second hard drive. However, since I had the system image on the second hard drive, I figured that I could use that to re-image the first hard drive, pull the files, and wipe it again.Now, since the old motherboard and CPU drivers were saved on the system image, I figured Windows wouldn't be able to load, but as long as the first hard drive contained my files, I thought it wouldn't matter since I could just install the hard drive on the family computer, pull the files, put it back into my computer, and start the installation process all over again.However, when I tried to re-image my first hard drive with the image I had on the second hard drive, I got an error saying that the recovery tools were not compatible, or something to that extent.
At this point, I figured that since the system image was SP1, if I installed Win 7 on my first hard drive and upgrade to SP1, then it would be compatible, so that's exactly what I did.After upgrading to SP1, I tried to re-image the first hard drive, but this time, I used the Win 7 disk in order to do so. I booted from the Win 7 CD, got to the system image restore, and got an image similar to this:Where it says "Intel Raid 0 Volume," I had my C: drive. I assumed that the C: drive was my first hard drive, so I didn't check anything.In the next window, I was told that my first hard drive would be formatted and re-partitioned, so I said yes. When the system was preparing for the re-imaging, I got an error saying that re-imaging failed, and the system would restart.Of course, since my first hard drive was formatted, Windows didn't load, so I tried the re-image again. I didn't get the error, and it showed that the system was "Restoring disk (C: )."However, it was taking WAY too long. 12 hours into the restore, it didn't even go halfway. I left it running while I was at work, and I just came home now and saw that my system was completely frozen. The mouse pointer didn't move, and I left it like that for a few minutes. After half an hour, I held the power button down to turn it off, and tried the re-imaging again.It was going as slowly as it did the second time around, so I canceled the restore, turned it off, registered to these forums off my family computer, and here I am right now.I'm thinking that I should replace all the old parts and try the restore again, but other than that, I'm stuck as to what I should do.
1 x Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case, comes with Three Fans-1x Front Blue LED 120mm Fan, 1x Top 140mm Fan, 1x Rear 120mm Fan, option Fans-2x Side 120mm Fan
1 x ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard
1 x SAPPHIRE 100283-3L Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
[code]....
Load Backup Image To New Harddrive With Macrium?
Aug 7, 2012I recently purchased a new hard drive, and to this point have been utilizing Macrium only for backup images.
What I'm trying to do is copy a working image of my old hard drive including the OS Xp, to the new hard drive, but the pc won't boot with the copy installed on the new hard drive!
Move Location Of Macrium Image XML Files?
Jan 15, 2013I just noticed that the default location for the xml files it creates with each image is on my C:.... My Documents/Reflect.I always just let it choose until I came to the image, which is on an external drive.Should these be on my external drive, and can I move them safely so they will be recognized, in case my C: fails?In other words, can I move them and Macrium will find them? Do I have to do a step after I move them
View 6 Replies View RelatedUnable To Open Kodak Imaging In Windows 7?
Aug 9, 2012i am unable to open kodak imaging in windows 7 (pro).
View 1 Replies View Related