SSD, ChkDsk And Macrium Not In Harmony
Apr 28, 2012
I just installed an Intel 330 120G SSD in my netbook. Macrium Reflect worked brilliantly to clone and resize the partiions to fit from a larger 250G hard drive to the new 120G SSD.After swapping in the new SSD, I wanted to make an image of the completed install but Reflect balked for the C: drive with an "MFT error" and a suggestion to run ChkDsk.I did as instructed and ChkDsk returned a bunch of errors but I suspect they are not really errors but rather unexpected results from an SSD. There were about ten of these...CHKDSK is verifying files (stage 1 of 3)... 0 percent complete. (0 of 151808 file records processed)Attribute record (128, "") from file record segment 1536 is corrupt.
View 7 Replies
ADVERTISEMENT
Jan 15, 2013
I notice that Macrium has a lot of updates. Should I make a new disc and a new image with each update. I try to read the contents of the update but it is difficult to understand at times. I image occasionally and keep sensitive data on removable media.
View 4 Replies
View Related
Oct 13, 2012
just installed free macrium Windows 7 64 bit backup. created image bu on external hd. created both pe and linux recovery cds. inserted cd, shut down system; turned on system, no boot from either cd; windows came up normally.
View 3 Replies
View Related
Nov 1, 2012
I saw that the free MR edition have an update! I have build 5154 of v5.0. My question is: if I update it to the latest v5.1 , the images and the Bootable Rescue Media I created before will still work?
View 3 Replies
View Related
Jan 16, 2013
Something has changed in the bios I guess. No matter how I set the boot order it will not boot the disc.
View 7 Replies
View Related
Mar 25, 2010
This tutorial shows the complete imaging and recovery cycle using free Macrium as the example.
View 0 Replies
View Related
Oct 8, 2011
I've wanted to clone a drive. I have just installed a WD20EARX (J:/), but after only a couple of seconds, I get the following Error message: Failed to prepare operations. Error code: 10 'File system error is found' with extended code: 458,774 'Block bitmap corrupted'" module="10" time="1318002352".I've checked out the FAQs and that's not helped.I have also tried using Macrium, but get the message: Clone failed - - VerifyFileSystem failed.I have checked through Device Manager and all appears to be OK in there. Ithe new drive is showing up in there OK, but when I check up in Start > Computer, it's not showing up in there.Anyone any idea what it all means and simple step-by-step instruction of how to get around it. I am using Windows 7 and the new drive, 2TB, is formatted to NTFS
View 2 Replies
View Related
Aug 24, 2012
my son set up a backup strategy. He has a Seagate GoFlex 2TB network drive that he planned to do backup with. It comes with software to backup files and folders, but not the system image. He has Windows 7 home which apparently can't do backup to a network drive. I see Macrium is recommended here. Can the free version backup and recover a system image to a network drive?
View 1 Replies
View Related
Nov 28, 2012
what Is the best "free" version of macrium reflect.
View 1 Replies
View Related
Jun 12, 2012
I have imaged my neighbours Netbook with Macrium Reflect. Since it has no DVD burner, I want to create a bootable Macrium (Linux) recovery media on a thumb drive. Not sure how to proceed.
View 6 Replies
View Related
Aug 4, 2012
previously I used Macrium Reflect to do an image of my HP laptop's hard disk, and yesterday, i tried to recover using the image, everything was successful, however, I cannot access the recovery partition anymore. Pressing F11 while booting does not boot into Recovery Manager anymore like it previously did, instead it went straight into booting windows... and i tried to access the folders inside the recovery partition, it says that the files are corrupted and unreadable.
View 8 Replies
View Related
Dec 16, 2012
Attempting to restore an image to my dad's computer as a test in case of a crash. He is running Win 7 Pro 64bit and I have made the Macrium rescue CD which finds the images and reports a successful operation. However, when I try to start the new disk, it gets to the windows flags screen and goes nowhere for an hour or more.
I have used the exact same procedure with my Win 7 Pro 32bit computer and it all works fine.
View 5 Replies
View Related
Sep 19, 2011
Created an image of my C drive and System Reserved with Macrium. I want to change my partitions prior to restoring my image. Is the easiest to just use my Windows 7 disk?Have a 500GB hard drive on my laptop and want to change the partition sizes.
View 2 Replies
View Related
Feb 20, 2012
At the moment I have two Sony Vaio laptops. My old one has an 80 GB hard drive partitioned as a C and D drive and has Windows XP. My new one has a 320 GB hard drive in one partition C running Windows 7 64 bit. I have several backups on a Freecom 320 GB external hard drive created with Macrium Reflect free edition.
The latest back-up I have on the Freecom is the complete contents of my new computer ammounting to about 72 GB.
Would it be possible for me to copy what is on the Freecom to my old computer in order to create a clone of my new computer? I basically want to have this as a backup in case the new laptop croaks. If this is possible would I have to prepare the old drive in any way such as wiping it clean or re-partitioning it or would the stuff on the Freecom do that as it copied?
View 9 Replies
View Related
Mar 13, 2012
I recently built a pc and all is well. Clean install of Windows 7 HP 64. For the first couple of days I was in and out of the system as the default admin (user you are asked to create during Windows 7 install). It wad during this time I installed macrium reflect free 5. I images the system after getting all the drivers in and then set up a scheduled backup for 7am each day. Worked fine.
Now I have created a normal user for me without admin privilege (for security reasons) which will be my day to day login. However this morning macrium failed to run the scheduled image. I was logged in as me, the low lvl user, not admin. The log file had an error about being unable to access adminxml file
I'm guessing this is because I installed macrium whilst an admin? Additionally I created the xml file whilst admin and then turned it into a schedlue whilst admin. However the xml and schedule are both set to run as admin with the admin password typed in.
Macrium is available to me as a normal user but when I launch it I'm asked for the admin password. Just trying to give as much info as poss.
View 8 Replies
View Related
Aug 7, 2012
I recently purchased a new hard drive, and to this point have been utilizing Macrium only for backup images.
What I'm trying to do is copy a working image of my old hard drive including the OS Xp, to the new hard drive, but the pc won't boot with the copy installed on the new hard drive!
View 2 Replies
View Related
Jan 15, 2013
I just noticed that the default location for the xml files it creates with each image is on my C:.... My Documents/Reflect.I always just let it choose until I came to the image, which is on an external drive.Should these be on my external drive, and can I move them safely so they will be recognized, in case my C: fails?In other words, can I move them and Macrium will find them? Do I have to do a step after I move them
View 6 Replies
View Related
Feb 23, 2011
I know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
View 9 Replies
View Related
Jul 4, 2012
i've been using macrium reflect without problems, but recently, due to the harddisk drive of my laptop having problems and is replaced, I cannot backup an image of the disk with macrium anymore.. i'm using v5, but i have the following error when i attempt the imaging: ERROR: COM call "m_pVssObject->BackupComplete(&pAsync)" failed.
- Returned HRESULT = 0x80042301
- Error text: VSS_E_BAD_STATE
View 1 Replies
View Related
Mar 22, 2012
When I try and Disk defrag a message comes up..."Disk degramenter has detected that Chkdsk is scheduled to run on the volume Cf. (C. Please run Chkdsk /f. " What is this and where and how do I run this? I have trying everything. But I am pretty Computer dumb.
View 7 Replies
View Related
Apr 29, 2011
Chkdsk is becoming extremely annoyingOne day it does chkdsk for no reason at alThen some day it does it againHow do you disable chkdsk?
View 4 Replies
View Related
Jul 18, 2011
Im trying to run CHKDSK. Upon restarting my notebook, its just a blackscreen and windows does not start up. After 30-40 mins it goes into sleep mode and when I go out of it, everything runs fine, but I dont think CHKDSK has run.
View 1 Replies
View Related
Feb 16, 2012
I ran the chkdsk /r upon next reboot.The DOS screen was displayed and running.I stopped watching the screen, and hours later upon checking, the screen is not displaying anything.The machine is a laptop hooked up to a docking station.I checked the monitor connections, they keep going to powersave, I undocked the laptop and the display there will not show anything either.The battery and wifi lights are steadily flashing.Windows 7 Pro x64..What is going on? is the chkdsk done? should i hard reboot the machine?
View 2 Replies
View Related
Feb 19, 2012
I am trying to run CHKDSK on an external drive that appears to have some bad sectors. I get the standard "Access denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." error. Elsewhere in this forum are similar complaints that tell me I must run the CHKDSK command as Administrator and get a command prompt that reads "C:Windowssystem32>" instead of "C:UsersAdministration>". Well by running the cmd.exe command as Administrator I finally got the recommended command prompt (the "elevated" command prompt some are calling it).
View 2 Replies
View Related
Feb 23, 2012
I made a chkdsk and found errors which were repaired by not allowing the bad fragments to be written on. When I use chkdsk /v it continually shows 8kb in bad sectors. Does anyone know if these are the bad sectors that were sent into limbo or the total bad kb on the hard drive? I have made back ups of my documents and the OS. I think that these bad sectors were caused by a recent freeze which required a bad shutdown. If so I may not be required to replace the harddrive.
View 4 Replies
View Related
Jul 26, 2012
I'm using acer aspire 4930 was using it fine then one day starting up takes 30mins, and doing anything on it will either takes forever or not reponding at all. So i start up in safe mode and found out that my second partition is unaccessisble. I tried using check disk the normal way, but it says windows cant access it. So how do i fix this as i do not want to lose my files.Path D: could not be opened. System error [1392]: The file ordirectory is corrupted and unreadable.
View 1 Replies
View Related
Oct 23, 2009
When i turn on my PC Windows always checking my harddrive.
View 2 Replies
View Related
Feb 15, 2010
Yesterday I tried to install an image mounting program (Alcohol 120%) on Windows 7 Professional x64. When the instillation started it prompt me to restart my computer (which is normal). When my computer restarted I got 5 error messages at the logon screen (in the following order):
(1) The file or directory C:Windows
escache is corrupt and unreadable. Please run chkdsk utility.
(2) The file or directory Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(3) The file or directory C:Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(4) The file or directory Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(5) The file or directory C:Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
After hitting âOKâ on each message and typing my password Windows logged me on to a temporary profile.
I went to my C: drive and tried to run the chkdsk but I got this message: âWindows canât check the disk while itâs in use.â So I chose to schedule a disk check next time I log on. Then I restarted and let chkdsk run. Then I got this error message:
âCannot open volume for direct access.
Autochk cannot run due to an error caused by a recently installed software package.
Use the system restore feature from the control panel to restore to a point prior to the recent software package instillation.
An unspecified error occurred (766f6c756d652e63 3f1)â
I then skipped check disk and tried to System Restore and got this error message:
âThe disk C: has errors
Windows has detected file system corruption on C: you must check the disk for errors before it can be restored.â
Windows seems to be taking me in circles, and I am unsure of what to do. I would really like to avoid reinstalling windows and starting from scratch.
If anyone has had this problem or knows what to do, any help would be appreciated.
View 5 Replies
View Related
Oct 22, 2012
I wanted to delete a folder in my documents but it was giving me an error which I cannot remember exactly now, but after doing some research, most sites had suggested that I run a Chkdsk. My computer successfully completed the Chkdsk, but now my computer is in some sort of coma where it loads up fine, but after logging in, there is no text whatsoever on the screen. On top of this the start bar does not work and any explorer based functions are extremely large,pixelated and absent text.I'm using Windows 7 Ultimate x32 on a 2009 Toshiba Satellite In the last year of high school and don't have most of my files backed up anywhere?
View 1 Replies
View Related
Mar 3, 2011
I was trying to partition my 500gb hdd in my laptop. So i could run windows xp and 7 on the machine. But before partitioning it it said i needed to run the Chkdsk utility. so i had it run on startup. Now for about the past 6-10 hours it has bean on stage 4 of 5 going from 32% to 34%. How do i stop it? I dont wont to hurt my computer. i have windows 7 home premium installed on the machine that has the problem.
View 14 Replies
View Related
Dec 25, 2011
I am using Windows 7 64 bit Home Edition. Is it appropriate to use chkdsk periodically to check the health of my C: & D: file systems? Can running chkdsk cause any harm to the file system?
View 3 Replies
View Related
