Chkdsk /v 8kb In Bad Sectors?
Feb 23, 2012
I made a chkdsk and found errors which were repaired by not allowing the bad fragments to be written on. When I use chkdsk /v it continually shows 8kb in bad sectors. Does anyone know if these are the bad sectors that were sent into limbo or the total bad kb on the hard drive? I have made back ups of my documents and the OS. I think that these bad sectors were caused by a recent freeze which required a bad shutdown. If so I may not be required to replace the harddrive.
View 4 Replies
ADVERTISEMENT
Jun 20, 2011
What features of 7 helps to repair bad sectors of hdd
View 2 Replies
View Related
Jan 16, 2013
This notebook started to behave badly and I found that the problem is the HDD.ItFor you to get the scenario: I first ran the Windows native disk tool and it reported no problem. But the system was still slow and freezing.So I made some googling and ran Check Disk GUI, but it couldn't complete its job. So I started to figure out that the thing was a bit harder than I first thought.I tried to defrag and optimize with Auslogics Disk Defrag Portable, and it too couldn't go all the way.I tried PartitionGuru, which, finally, could do the job � in more than 48 hours of disk scan! And it reported: "Disk verify completed. 548 bad track areas found."After all that, things went worse: I couldn't start Windows, I got a "Missing operating system" message...Then I tried Wondershare LiveBoot 2012 to no avail.The last effort I want to try is use some portable app (running from a USB pen drive) to format the whole HDD.The HDD in question has three partitions. C: (system), D: (data, I created this partition), and a hidden one that keeps the data needed to restore the Acer notebook to its factory settings.If I succeed to format the whole thing, I'll try to make a fresh install of Windows 7 Home Premium. I want to format the whole HDD (from a USB pen drive) to have one single partition.
View 4 Replies
View Related
Aug 7, 2012
explicitly creating bad sectors in a flash drive. Is making bad sectors possible by repeadly disconnecting flash drive during file write process? How can a flash drive develop bad sectors in its memory ?
View 6 Replies
View Related
Aug 30, 2012
I am not able to understand the concept of "Soft" bad sectors. Can software be the cause of bad sectors?
View 1 Replies
View Related
Nov 8, 2012
My Windows 7 system will not boot due to what I found out are bad sectors on the hard drive. I ran SeaTools to check the Seagate drive and it found several bad sectors. If I allow SeaTools to "repair" the bad sectors, will I be able to boot into Windows 7 again so I can at least save my data before replacing the hard drive?
View 3 Replies
View Related
Jan 24, 2013
I am having a problem with my computer, it shows black screen after logging in, it won't display my desktop, even if i use another user's login details it seems as if it will display but then suddenly logout,but i can use the other partition without having a problem.
View 2 Replies
View Related
Apr 17, 2009
I get my PC configured and set up exactly how I like it, and then my 1 year old hard drive conks out on me!
I did a CHKDSK and it had some bad sectors and plenty of file corruption. Ran the Hitachi DFT software and it seemed to think it has rescued it, but I'm using another drive now just in case.
Luckily I could still access my e-mails when I accessed the drive from another system, and everything else is backed up via Acronis.
View 9 Replies
View Related
Jan 17, 2012
I've been having problems with installing a fresh OS because my harddrive. When I began the clean installation process my hard drive started clicking periodically (which didn't happen till I started) I was able to partition around these bad sectors and get the OS installed. I am now sitting at a clean desktop with the computer running fine.However, I know that these bad sectors will cause problems later and I'm wanting to know what I should do now. Is there anything I can do to kill these bad sectors and ensure my hard drive to stay proper? I realize that this shows my hard drive is going bad, but I feel if I can get this taken care of then I can keep the hard drive a while longer.
View 6 Replies
View Related
Nov 5, 2009
Drive C was an old IDE drive with XP on it. I installed and new SATA drive for WIN 7. Win 7 installed and activated just fine. Now I want to remove the Old IDE XP drive from the machine but the boot partition is on the IDE drive. I need to know how to remove the old drive and make the new SATA drive bootable into the Win 7 install on it.
View 4 Replies
View Related
Jan 4, 2013
My laptop is not booting up. i tried reinstalling it, but still even with a boot able disk, the system is not loading up. I even tried reinstalling from the USB drive. still I the system isn't responding.
View 7 Replies
View Related
Mar 1, 2012
I am having window xp running on that hdd but when I am trying to load windows 7 then setup recognize that my hdd having bad sectors and after running set it shows the fail operation of loading windows 7.
View 3 Replies
View Related
Jan 18, 2012
I have installed windows 7 x64, the installation went fine, it runs fine, no bsods, no crashes, no restarts, no freezes, no slowdown. Basically it just runs fine, all updates installed fine.
Now, I did a scan on the HDD, and it has bad sectors pending. I imaged the windows to another HDD.Loaded onto the other HDD, it boots fine, runs fine, idles fine, installed a few things, checked the files system, ran chkdsk ( just fix box, not the second box to repair ), all OK.So my question is, how can I know if the bad sectors on old HDD had any damage to the windows installation, and thus on the new HDD?
View 9 Replies
View Related
Jun 8, 2011
HD passes Data Lifeguard extended CD test. How serious would you rate the Caution CDI is giving for Reallocated Sectors?
----------------------------------------------------------------------------
CrystalDiskInfo 3.10.0 (C) 2008-2010 hiyohiyo
Crystal Dew World : Crystal Dew World
----------------------------------------------------------------------------
OS : Windows 7 Ultimate Edition SP1 [6.1 Build 7601] (x86)
Date : 2011/06/08 20:08:03
[code].....
View 4 Replies
View Related
Jan 3, 2012
I am having serious corruption problems with my hard drive. I have reinstalled windows a few times now, but it always ends up being unable to boot. At the moment, my computer cannot even boot up in normal or safe mode, all my restore points have been deleted, and startup repair cannot do anything.After backing up my data and running a test with the Seagate SeaTools diagnostics in DOS, it was reported that there were bad sectors found on my Hard Disk. But I actually can't use this software to repair the bad sectors tough since it's a Western Digital drive. Is there any software that I could download to repair these bad sectors, or am I going to have to replace
View 5 Replies
View Related
Nov 16, 2012
I assume I have a trojan which replaced a certain windows core DLL by a modified version.When I list all files in a directory (e.g. C:widnowssystem32) in Windows Explorer then certain files are not visible.Yes, I checked unhide hidden files on unprotect system files in WinExp options.So actually ALL files must be visible which is not the case.Is there a win-explorer-like tool which does not use this faked win
View 1 Replies
View Related
Aug 1, 2012
One of my external drives (WD) appeared a warning in SMART status:
C5 Current Pending Sector Count
Current = 200
Worst = 200
Threshold = 0
Raw values = 1
If this is repairable problem, what is the best tool to repair this?
View 2 Replies
View Related
Nov 22, 2012
My external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
View 1 Replies
View Related
Mar 22, 2012
When I try and Disk defrag a message comes up..."Disk degramenter has detected that Chkdsk is scheduled to run on the volume Cf. (C. Please run Chkdsk /f. " What is this and where and how do I run this? I have trying everything. But I am pretty Computer dumb.
View 7 Replies
View Related
Apr 29, 2011
Chkdsk is becoming extremely annoyingOne day it does chkdsk for no reason at alThen some day it does it againHow do you disable chkdsk?
View 4 Replies
View Related
Jul 18, 2011
Im trying to run CHKDSK. Upon restarting my notebook, its just a blackscreen and windows does not start up. After 30-40 mins it goes into sleep mode and when I go out of it, everything runs fine, but I dont think CHKDSK has run.
View 1 Replies
View Related
Feb 16, 2012
I ran the chkdsk /r upon next reboot.The DOS screen was displayed and running.I stopped watching the screen, and hours later upon checking, the screen is not displaying anything.The machine is a laptop hooked up to a docking station.I checked the monitor connections, they keep going to powersave, I undocked the laptop and the display there will not show anything either.The battery and wifi lights are steadily flashing.Windows 7 Pro x64..What is going on? is the chkdsk done? should i hard reboot the machine?
View 2 Replies
View Related
Feb 19, 2012
I am trying to run CHKDSK on an external drive that appears to have some bad sectors. I get the standard "Access denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." error. Elsewhere in this forum are similar complaints that tell me I must run the CHKDSK command as Administrator and get a command prompt that reads "C:Windowssystem32>" instead of "C:UsersAdministration>". Well by running the cmd.exe command as Administrator I finally got the recommended command prompt (the "elevated" command prompt some are calling it).
View 2 Replies
View Related
Jul 26, 2012
I'm using acer aspire 4930 was using it fine then one day starting up takes 30mins, and doing anything on it will either takes forever or not reponding at all. So i start up in safe mode and found out that my second partition is unaccessisble. I tried using check disk the normal way, but it says windows cant access it. So how do i fix this as i do not want to lose my files.Path D: could not be opened. System error [1392]: The file ordirectory is corrupted and unreadable.
View 1 Replies
View Related
Oct 23, 2009
When i turn on my PC Windows always checking my harddrive.
View 2 Replies
View Related
Feb 15, 2010
Yesterday I tried to install an image mounting program (Alcohol 120%) on Windows 7 Professional x64. When the instillation started it prompt me to restart my computer (which is normal). When my computer restarted I got 5 error messages at the logon screen (in the following order):
(1) The file or directory C:Windows
escache is corrupt and unreadable. Please run chkdsk utility.
(2) The file or directory Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(3) The file or directory C:Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(4) The file or directory Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(5) The file or directory C:Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
After hitting âOKâ on each message and typing my password Windows logged me on to a temporary profile.
I went to my C: drive and tried to run the chkdsk but I got this message: âWindows canât check the disk while itâs in use.â So I chose to schedule a disk check next time I log on. Then I restarted and let chkdsk run. Then I got this error message:
âCannot open volume for direct access.
Autochk cannot run due to an error caused by a recently installed software package.
Use the system restore feature from the control panel to restore to a point prior to the recent software package instillation.
An unspecified error occurred (766f6c756d652e63 3f1)â
I then skipped check disk and tried to System Restore and got this error message:
âThe disk C: has errors
Windows has detected file system corruption on C: you must check the disk for errors before it can be restored.â
Windows seems to be taking me in circles, and I am unsure of what to do. I would really like to avoid reinstalling windows and starting from scratch.
If anyone has had this problem or knows what to do, any help would be appreciated.
View 5 Replies
View Related
Oct 22, 2012
I wanted to delete a folder in my documents but it was giving me an error which I cannot remember exactly now, but after doing some research, most sites had suggested that I run a Chkdsk. My computer successfully completed the Chkdsk, but now my computer is in some sort of coma where it loads up fine, but after logging in, there is no text whatsoever on the screen. On top of this the start bar does not work and any explorer based functions are extremely large,pixelated and absent text.I'm using Windows 7 Ultimate x32 on a 2009 Toshiba Satellite In the last year of high school and don't have most of my files backed up anywhere?
View 1 Replies
View Related
Mar 3, 2011
I was trying to partition my 500gb hdd in my laptop. So i could run windows xp and 7 on the machine. But before partitioning it it said i needed to run the Chkdsk utility. so i had it run on startup. Now for about the past 6-10 hours it has bean on stage 4 of 5 going from 32% to 34%. How do i stop it? I dont wont to hurt my computer. i have windows 7 home premium installed on the machine that has the problem.
View 14 Replies
View Related
Dec 25, 2011
I am using Windows 7 64 bit Home Edition. Is it appropriate to use chkdsk periodically to check the health of my C: & D: file systems? Can running chkdsk cause any harm to the file system?
View 3 Replies
View Related
Apr 28, 2012
I just installed an Intel 330 120G SSD in my netbook. Macrium Reflect worked brilliantly to clone and resize the partiions to fit from a larger 250G hard drive to the new 120G SSD.After swapping in the new SSD, I wanted to make an image of the completed install but Reflect balked for the C: drive with an "MFT error" and a suggestion to run ChkDsk.I did as instructed and ChkDsk returned a bunch of errors but I suspect they are not really errors but rather unexpected results from an SSD. There were about ten of these...CHKDSK is verifying files (stage 1 of 3)... 0 percent complete. (0 of 151808 file records processed)Attribute record (128, "") from file record segment 1536 is corrupt.
View 7 Replies
View Related
Dec 17, 2009
I upgraded from Vista to Win 7 using the HP upgrade disk. About every 2 weeks chkdsk will start at startup. The countdown won't stop and I can't skip it by pressing any key. When it counts down to 1 it freezes and I had to press the power button to restart. Then when it restarts the problem reoccurs.
In the past if I press F8 and choose last known good configuration, the system will normally boot. And then I'll schedule a disk check next time I start the computer and this will normally fix the problem. There won't be any check disk error in 2 weeks.
But this time no matter what I do I can't get it fixed. sfc /scannow didn't find any errors. I ran the system repair by pressing F8 at startup and it said it fixed the startup problems. But the disk check I scheduled at startup still won't run properly. It shows up and then disappears without actually doing anything.
I'm using Avira now but the problem was there when I was using Avast. I don't know what might be causing the problem.
View 7 Replies
View Related
