One of my external drives (WD) appeared a warning in SMART status:
C5 Current Pending Sector Count
Current = 200
Worst = 200
Threshold = 0
Raw values = 1
If this is repairable problem, what is the best tool to repair this?
I bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.
Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.
Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.
So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.
When I go to Control PanelAll Control Panel ItemsPerformance Information and Tools and click "Rate this computer," it crashes before it's done.Desktop Window Manager Sessions Manager is disabled, not running, and the option to start it is greyed out. sfc scannow didn't finish, so I ran it at boot (url) That gave me the error "There is a system repair pending which requires reboot to complete." I rebooted into windows and then back to the disc several times and got the error each time. My computer does not have a pending.xml file. Since sfc scannow wasn't working, I tried to do a repair install (as described here: http://www.sevenforums.com/tutoria [...] ml?ltr=R). I ran the compatibility check (by clicking "upgrade" after starting setup) on the windows 7 disk and it gave me this message: "Windows needs to be restarted so necessary changes to system files can be made before continuing." Restarting, however, does not accomplish this. What can I do? It seems my main problem right now is finishing up whatever Windows thinks it needs to update on a reboot (I've rebooted many times since discovering the message.
View 2 Replies View RelatedI just tried sfc/scannow and I got the following message: There is a system repair pending which requires a reboot to complete. Restart windows and try sfc again.I'm thinking this repair pending is from the chldsk/r I completed previously. This is great, except when I reboot, the repair does not startup and the system just goes back to the Windows Error Recovery screen I had earlier. How do I get the repair to complete?
View 6 Replies View RelatedI created a backup and image (Win 7 Pro) on an external (USB attached) HDD and then created a Windows 7 System Repair Disk. I then booted from the repair disk and the attached external drive is not visible.
The external drive is attached via through a hub, does it need to be attached directly? Is their a generic USB Mass Storage Device driver that I can load?
I was hoping that by creating the repair disk that all necessary drivers would have been loaded to the disk, but apparently not.
I made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
View 9 Replies View Relatedexplicitly creating bad sectors in a flash drive. Is making bad sectors possible by repeadly disconnecting flash drive during file write process? How can a flash drive develop bad sectors in its memory ?
View 6 Replies View RelatedI am having a problem with my computer, it shows black screen after logging in, it won't display my desktop, even if i use another user's login details it seems as if it will display but then suddenly logout,but i can use the other partition without having a problem.
View 2 Replies View RelatedI get my PC configured and set up exactly how I like it, and then my 1 year old hard drive conks out on me!
I did a CHKDSK and it had some bad sectors and plenty of file corruption. Ran the Hitachi DFT software and it seemed to think it has rescued it, but I'm using another drive now just in case.
Luckily I could still access my e-mails when I accessed the drive from another system, and everything else is backed up via Acronis.
Drive C was an old IDE drive with XP on it. I installed and new SATA drive for WIN 7. Win 7 installed and activated just fine. Now I want to remove the Old IDE XP drive from the machine but the boot partition is on the IDE drive. I need to know how to remove the old drive and make the new SATA drive bootable into the Win 7 install on it.
View 4 Replies View RelatedI am having serious corruption problems with my hard drive. I have reinstalled windows a few times now, but it always ends up being unable to boot. At the moment, my computer cannot even boot up in normal or safe mode, all my restore points have been deleted, and startup repair cannot do anything.After backing up my data and running a test with the Seagate SeaTools diagnostics in DOS, it was reported that there were bad sectors found on my Hard Disk. But I actually can't use this software to repair the bad sectors tough since it's a Western Digital drive. Is there any software that I could download to repair these bad sectors, or am I going to have to replace
View 5 Replies View RelatedMy external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
View 1 Replies View RelatedIam unable to run disk check from command prompt, after trying to run dskdsk tells me, The type of file is NTFS, Then cannot lock current drive, Then Windows cannot run disk checking on this Volume because it is write protected, have checked in bios no write protected no hiar left
View 3 Replies View RelatedI just purchased a new 10,000 RPM VelociRaptor drive and I'm going to use it as my OS drive. Is it possible to set up a RAID 0 with my current drive (hitachi 1TB 7200RPM) without having to format it?
View 7 Replies View RelatedI was wondering if I can use existing ssd (loaded with Win 7 and all current drivers) for a new build: new mobo, cpu and ram.Both will be x64 Guess I`m just lazy for not wanting to do another clean install
View 6 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI am about to purchase a ssd for my pc and was wondering if there is a way to simply transfer windows to the ssd from my current spinning drive
View 3 Replies View RelatedHow do you reset (clear) all current USB drive letter assignments? As a result of changing my external USB Hub controller from a CyberPower CP-H720P (USB 2.0 7-Port Hub w/Power Adapter) to a SIIG 06-0960A (USB 3.0 w/3-Ports & USB 2.0 w/3-Ports plus Card Reader w/Power Adapter), all of my original external USB drive letters were changed. The following are my Original and New USB external device drive letters: F changed to O � Port 7 Hub 3 � Patriot Memory (16GB USB 2.0 Memory) G changed to N � Port 2 Hub 4 � Desktop (Seagate USB 2.0) H changed to M � Port 1 Hub 4 � Free Agent Desktop (Seagate USB 2.0) I changed to K � Port 4 Hub 3 � MyBook 1130 (Western Digital USB 3.0) J changed to L � Port 3 Hub 3 � MyBook 1140 (Western Digital USB 3.0) I need to know what steps I must perform to clear (reset) my current USB drive letter assignments so that I can begin anew starting with the first available drive letter, drive letter �F�.
View 2 Replies View RelatedMy flash disk does not appear on my computer.
View 3 Replies View RelatedHow do you delet pending updates on windows 7
View 1 Replies View Relatedmy printeris online but does not work why
View 2 Replies View RelatedI have bought a cd which I wish to add to my cd collection on my pc. I insert the cd and winsows media player will find it and download all the cd information and list it ok. It then starts the ripping process by listing all the tracks as pending, but will not rip anything. You can hear the cd head tracking but nothing else. The same happens in itunes.I have another pc with XP as the OS and the cd will rip ok on that version of media player
View 5 Replies View RelatedI recently purchased the Dell XPS 14z and it has been working fine, however when I take it out to work (where there's no wifi connections) a red 'x' now appears on the wifi icon in the task tray. Usually it just shows an orange star and is essentially 'pending' connections. When I try and use my BlackBerry Bold 9900 to connect using the mobile internet it says that it can't connect as the wifi radio may be off? This hasn't happened before and I've tried everything to troubleshoot it with no luck.
View 1 Replies View RelatedWhat features of 7 helps to repair bad sectors of hdd
View 2 Replies View RelatedThis notebook started to behave badly and I found that the problem is the HDD.ItFor you to get the scenario: I first ran the Windows native disk tool and it reported no problem. But the system was still slow and freezing.So I made some googling and ran Check Disk GUI, but it couldn't complete its job. So I started to figure out that the thing was a bit harder than I first thought.I tried to defrag and optimize with Auslogics Disk Defrag Portable, and it too couldn't go all the way.I tried PartitionGuru, which, finally, could do the job � in more than 48 hours of disk scan! And it reported: "Disk verify completed. 548 bad track areas found."After all that, things went worse: I couldn't start Windows, I got a "Missing operating system" message...Then I tried Wondershare LiveBoot 2012 to no avail.The last effort I want to try is use some portable app (running from a USB pen drive) to format the whole HDD.The HDD in question has three partitions. C: (system), D: (data, I created this partition), and a hidden one that keeps the data needed to restore the Acer notebook to its factory settings.If I succeed to format the whole thing, I'll try to make a fresh install of Windows 7 Home Premium. I want to format the whole HDD (from a USB pen drive) to have one single partition.
View 4 Replies View RelatedI made a chkdsk and found errors which were repaired by not allowing the bad fragments to be written on. When I use chkdsk /v it continually shows 8kb in bad sectors. Does anyone know if these are the bad sectors that were sent into limbo or the total bad kb on the hard drive? I have made back ups of my documents and the OS. I think that these bad sectors were caused by a recent freeze which required a bad shutdown. If so I may not be required to replace the harddrive.
View 4 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedI am not able to understand the concept of "Soft" bad sectors. Can software be the cause of bad sectors?
View 1 Replies View RelatedMy Windows 7 system will not boot due to what I found out are bad sectors on the hard drive. I ran SeaTools to check the Seagate drive and it found several bad sectors. If I allow SeaTools to "repair" the bad sectors, will I be able to boot into Windows 7 again so I can at least save my data before replacing the hard drive?
View 3 Replies View RelatedI've been having problems with installing a fresh OS because my harddrive. When I began the clean installation process my hard drive started clicking periodically (which didn't happen till I started) I was able to partition around these bad sectors and get the OS installed. I am now sitting at a clean desktop with the computer running fine.However, I know that these bad sectors will cause problems later and I'm wanting to know what I should do now. Is there anything I can do to kill these bad sectors and ensure my hard drive to stay proper? I realize that this shows my hard drive is going bad, but I feel if I can get this taken care of then I can keep the hard drive a while longer.
View 6 Replies View Related