I am having a problem with my computer, it shows black screen after logging in, it won't display my desktop, even if i use another user's login details it seems as if it will display but then suddenly logout,but i can use the other partition without having a problem.
View 2 Replies
I get my PC configured and set up exactly how I like it, and then my 1 year old hard drive conks out on me!
I did a CHKDSK and it had some bad sectors and plenty of file corruption. Ran the Hitachi DFT software and it seemed to think it has rescued it, but I'm using another drive now just in case.
Luckily I could still access my e-mails when I accessed the drive from another system, and everything else is backed up via Acronis.
I am having serious corruption problems with my hard drive. I have reinstalled windows a few times now, but it always ends up being unable to boot. At the moment, my computer cannot even boot up in normal or safe mode, all my restore points have been deleted, and startup repair cannot do anything.After backing up my data and running a test with the Seagate SeaTools diagnostics in DOS, it was reported that there were bad sectors found on my Hard Disk. But I actually can't use this software to repair the bad sectors tough since it's a Western Digital drive. Is there any software that I could download to repair these bad sectors, or am I going to have to replace
View 5 Replies View RelatedMy external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
View 1 Replies View Relatedexplicitly creating bad sectors in a flash drive. Is making bad sectors possible by repeadly disconnecting flash drive during file write process? How can a flash drive develop bad sectors in its memory ?
View 6 Replies View RelatedDrive C was an old IDE drive with XP on it. I installed and new SATA drive for WIN 7. Win 7 installed and activated just fine. Now I want to remove the Old IDE XP drive from the machine but the boot partition is on the IDE drive. I need to know how to remove the old drive and make the new SATA drive bootable into the Win 7 install on it.
View 4 Replies View RelatedOne of my external drives (WD) appeared a warning in SMART status:
C5 Current Pending Sector Count
Current = 200
Worst = 200
Threshold = 0
Raw values = 1
If this is repairable problem, what is the best tool to repair this?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedWhat features of 7 helps to repair bad sectors of hdd
View 2 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
This notebook started to behave badly and I found that the problem is the HDD.ItFor you to get the scenario: I first ran the Windows native disk tool and it reported no problem. But the system was still slow and freezing.So I made some googling and ran Check Disk GUI, but it couldn't complete its job. So I started to figure out that the thing was a bit harder than I first thought.I tried to defrag and optimize with Auslogics Disk Defrag Portable, and it too couldn't go all the way.I tried PartitionGuru, which, finally, could do the job � in more than 48 hours of disk scan! And it reported: "Disk verify completed. 548 bad track areas found."After all that, things went worse: I couldn't start Windows, I got a "Missing operating system" message...Then I tried Wondershare LiveBoot 2012 to no avail.The last effort I want to try is use some portable app (running from a USB pen drive) to format the whole HDD.The HDD in question has three partitions. C: (system), D: (data, I created this partition), and a hidden one that keeps the data needed to restore the Acer notebook to its factory settings.If I succeed to format the whole thing, I'll try to make a fresh install of Windows 7 Home Premium. I want to format the whole HDD (from a USB pen drive) to have one single partition.
View 4 Replies View RelatedI made a chkdsk and found errors which were repaired by not allowing the bad fragments to be written on. When I use chkdsk /v it continually shows 8kb in bad sectors. Does anyone know if these are the bad sectors that were sent into limbo or the total bad kb on the hard drive? I have made back ups of my documents and the OS. I think that these bad sectors were caused by a recent freeze which required a bad shutdown. If so I may not be required to replace the harddrive.
View 4 Replies View RelatedI am not able to understand the concept of "Soft" bad sectors. Can software be the cause of bad sectors?
View 1 Replies View RelatedMy Windows 7 system will not boot due to what I found out are bad sectors on the hard drive. I ran SeaTools to check the Seagate drive and it found several bad sectors. If I allow SeaTools to "repair" the bad sectors, will I be able to boot into Windows 7 again so I can at least save my data before replacing the hard drive?
View 3 Replies View RelatedI've been having problems with installing a fresh OS because my harddrive. When I began the clean installation process my hard drive started clicking periodically (which didn't happen till I started) I was able to partition around these bad sectors and get the OS installed. I am now sitting at a clean desktop with the computer running fine.However, I know that these bad sectors will cause problems later and I'm wanting to know what I should do now. Is there anything I can do to kill these bad sectors and ensure my hard drive to stay proper? I realize that this shows my hard drive is going bad, but I feel if I can get this taken care of then I can keep the hard drive a while longer.
View 6 Replies View RelatedMy laptop is not booting up. i tried reinstalling it, but still even with a boot able disk, the system is not loading up. I even tried reinstalling from the USB drive. still I the system isn't responding.
View 7 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI am having window xp running on that hdd but when I am trying to load windows 7 then setup recognize that my hdd having bad sectors and after running set it shows the fail operation of loading windows 7.
View 3 Replies View RelatedI have installed windows 7 x64, the installation went fine, it runs fine, no bsods, no crashes, no restarts, no freezes, no slowdown. Basically it just runs fine, all updates installed fine.
Now, I did a scan on the HDD, and it has bad sectors pending. I imaged the windows to another HDD.Loaded onto the other HDD, it boots fine, runs fine, idles fine, installed a few things, checked the files system, ran chkdsk ( just fix box, not the second box to repair ), all OK.So my question is, how can I know if the bad sectors on old HDD had any damage to the windows installation, and thus on the new HDD?
HD passes Data Lifeguard extended CD test. How serious would you rate the Caution CDI is giving for Reallocated Sectors?
----------------------------------------------------------------------------
CrystalDiskInfo 3.10.0 (C) 2008-2010 hiyohiyo
Crystal Dew World : Crystal Dew World
----------------------------------------------------------------------------
OS : Windows 7 Ultimate Edition SP1 [6.1 Build 7601] (x86)
Date : 2011/06/08 20:08:03
[code].....
I assume I have a trojan which replaced a certain windows core DLL by a modified version.When I list all files in a directory (e.g. C:widnowssystem32) in Windows Explorer then certain files are not visible.Yes, I checked unhide hidden files on unprotect system files in WinExp options.So actually ALL files must be visible which is not the case.Is there a win-explorer-like tool which does not use this faked win
View 1 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View Related
