Re-imaging A SSD?
Apr 16, 2011
I have a Intel 320 120GB SSD that I just installed last Tuesday. Everything went well with loading a image on it from my spinning HDD. Offset is correct and thdrive is running well.I got up the other morning to find that somehow Windows Auto Update had been turned on and the system had restarted after Win Update had downloaded & installed 18 updates without my permission.So today I re-loaded that original image I had used on Tuesday to get rid of the 18 updates (Whether I do them in the further is u to me not MS).This started me thinking about loading a image on a SSD drive.
1) Should I first run the Clean All command to wipe the drive before loading a image on it?
2) What effect does re-imaging a SSD have on the data, partitions and files that are already on the drive?
The program I use is Acronis TI 2011 that they say has full SSD support. But what does that really mean. During the re-image TI deletes all partitions and then recreates them as to what is contained in the image, even if they are the same.Reading some reports about SSDs deleting partitions & formatting the speed of the SSD was reduced by just deleting a partition and then recreating it and wasn't reduced by just formatting it. In fact formatting it seemed to improve the performance.So now I'm wondering Should I go back and format or run the Clean All command and then re-image the drive with that original image.
View 3 Replies
Oct 8, 2011
my old hard drive that has been my OS drive for years wont cut it.I have an image of my OS but i don't know how to 'image' or install it on the SSD without my cd drive.
View 2 Replies
View Related
Jan 12, 2012
I've just ordered an SSD for one of the laptops, meaning I'll have a nice 7200 RPM hard drive sitting unused.
My main desktop is a wonderful mini-ITX system with a single M4 SSD. It is currently backed up, along with all the laptops, to an Asus Windows Home Server machine, so I'm fairly confident about my data integrity in case of failure. But realizing that one can never be too safe with the primary desktop, and as the little Antec case has room for a second 2.5 inch drive, it occurs to me that the now-superfluous hard drive could be installed into the desktop and used for periodic (daily?) imaging.
The SSD has the usual mysterious 100 MB recovery partition and a single C: partition for the Windows 7 x64 Ultimate machine.
There's a lot of talk about moving from hard drive to SSD, but going the opposite direction just isn't discussed. Guess this is an odd situation.
So: would I have any alignment issues or other potential snags in imaging my SSD to a hard drive? Would the usual ideally-free software solutions such as Macrium or EaseUs be appropriate for this task?
View 5 Replies
View Related
Mar 25, 2010
This tutorial shows the complete imaging and recovery cycle using free Macrium as the example.
View 0 Replies
View Related
Nov 11, 2011
my imaging device is missing. not listed in the device manager sony vaio vpceg25yc. can i reinstall it back?
View 1 Replies
View Related
May 24, 2012
Is it possible to use the disk imaging tool for Windows 7 and provided that the hardware platform is exactly the same, use that same image to restore a second machine?
View 2 Replies
View Related
Mar 1, 2012
I'm looking for a document scanning software (of course FREE (if available)) to scan in my monthly bills using the automatic document feeder. Once they are all scan in to be able to place them in order. For example my elect bill is 3 pages. Therefore, if I scan it in with all the other bills, and then review it, I would like to put page 3 with the elect bill and not at the bottom of the pile.
View 1 Replies
View Related
Aug 26, 2012
I cant get my webcam to work every time I go to device manager, I don't see "imaging devices" and it keeps saying webcam not found.
View 2 Replies
View Related
Sep 9, 2011
I am preparing to replace my primary hard drive. The existing drive has limited space and there are indications that it may not last much longer. I have created a system image on another storage drive and a recovery disk using the software that is built in to windows 7. Is this an effective way to replace my hard drive? Is the windows 7 software reliable?
View 5 Replies
View Related
Jun 18, 2012
I recently upgraded my computer with a new motherboard, processor, RAM, and video card. Before I did this, I installed a second fully functional 1 TB internal hard drive just to hold the system image and my important documents. I made a system image using the native software that was available on Windows 7.To be clear, I made a 143 GB system image from my first 1 TB internal hard drive and put it on the second 1 TB internal hard drive. I also moved my important documents over to the second hard drive. (The second drive was completely formatted and turned into a Basic drive beforehand.)After installing the new components, I wiped my first hard drive, deleting all partitions on it, but I forgot that I had one more set of folders that I forgot to move over to the second hard drive. However, since I had the system image on the second hard drive, I figured that I could use that to re-image the first hard drive, pull the files, and wipe it again.Now, since the old motherboard and CPU drivers were saved on the system image, I figured Windows wouldn't be able to load, but as long as the first hard drive contained my files, I thought it wouldn't matter since I could just install the hard drive on the family computer, pull the files, put it back into my computer, and start the installation process all over again.However, when I tried to re-image my first hard drive with the image I had on the second hard drive, I got an error saying that the recovery tools were not compatible, or something to that extent.
At this point, I figured that since the system image was SP1, if I installed Win 7 on my first hard drive and upgrade to SP1, then it would be compatible, so that's exactly what I did.After upgrading to SP1, I tried to re-image the first hard drive, but this time, I used the Win 7 disk in order to do so. I booted from the Win 7 CD, got to the system image restore, and got an image similar to this:Where it says "Intel Raid 0 Volume," I had my C: drive. I assumed that the C: drive was my first hard drive, so I didn't check anything.In the next window, I was told that my first hard drive would be formatted and re-partitioned, so I said yes. When the system was preparing for the re-imaging, I got an error saying that re-imaging failed, and the system would restart.Of course, since my first hard drive was formatted, Windows didn't load, so I tried the re-image again. I didn't get the error, and it showed that the system was "Restoring disk (C: )."However, it was taking WAY too long. 12 hours into the restore, it didn't even go halfway. I left it running while I was at work, and I just came home now and saw that my system was completely frozen. The mouse pointer didn't move, and I left it like that for a few minutes. After half an hour, I held the power button down to turn it off, and tried the re-imaging again.It was going as slowly as it did the second time around, so I canceled the restore, turned it off, registered to these forums off my family computer, and here I am right now.I'm thinking that I should replace all the old parts and try the restore again, but other than that, I'm stuck as to what I should do.
1 x Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case, comes with Three Fans-1x Front Blue LED 120mm Fan, 1x Top 140mm Fan, 1x Rear 120mm Fan, option Fans-2x Side 120mm Fan
1 x ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard
1 x SAPPHIRE 100283-3L Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
[code]....
View 3 Replies
View Related
Jul 12, 2012
I have a Samsung laptop running windows 7 64 bit. I primarily use a non-administrator account. I got some malware a few days ago. Malwarebytes and MS security essentials seem to have cleared that up, but everything is still running slow in it.Additionally, the malware deleted all the shortcuts from the start menu (S.M.A.R.T. rogue antivirus, I deleted the temporary files before reading that was where the shortcuts were moved to)The administrator account is not suffering from the slowdown, everything seems fine in it. I made a windows repair disc using it.Partitions: there are four right now, windows (100mb), C drive (100gb), D drive (350 gb), and a recovery partition (15gb)1. I'd like to restore/repair windows 7 on the non-administrator account. From what I understand, the registry is likely faulty. I have little understanding of how to fix it, and no image or backup from before the malware infected. My data files are backed up to an external hard drive. I'd prefer to keep the programs registered and installed. I'm interested in dual-booting ubuntu. As the maximum of 4 partitions are assigned, I'd need to remove one of them. I've created a disk image of the system and C partitions onto an external hard drive (using Macrium Reflect). The data files are also backed up, either on that disc or on different clouds. I'd like to confirm that having done this, and having a windows repair disc, it's safe for me to use the recovery partition for ubuntu.
View 3 Replies
View Related
Dec 26, 2012
m webcam is not wrking no matter what i do.... i have done everything accept pull it apart... but i have recely gotten my comp back and the harddrive is now new... now my com wont show webcam fee to anyone but i can recienve it, i can hear theother person but they cannot hear me...
View 1 Replies
View Related
Jul 13, 2012
My Windows 7 configuration is relatively bullet proof (ha ha, nervous laughter).My OS and programs are on C, which I image using RDriveImage every month after Patch Tuesday.My data is on software-mirrored D/F drives.So as long as I don't have a catastrophic event affecting my computer, a routine "drive failure" should be recoverable, with the worst-case being I'd be out a month of updates, but with a good recent image of the OS drive.Anyway, I was recently looking at my event viewer and I have "Disk errors" that occur whenever I run a full image of C.
The complete error text is:
Quote: Log Name: System
Source: Disk
Date: 7/13/2012 3:38:44 PM
Event ID: 11
Task Category: None
[code]....
There were two errors in February (none before that), three in March, four each in May and July.In April and June I did incremental images, so the "bad" area wasn't imaged, so no error.With all the above as background, what's the safest way for me to isolate and/or repair the area(s) of the disk with the errors?The errors are always logged within 1-2 seconds of each other, so I suspect it's just one bad area.And I have never, ever, seen signs of a disk error. No BSOD, no clicking noises, no impaired performance, even for a moment.
View 9 Replies
View Related
Dec 9, 2012
My webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies
View Related
May 6, 2012
What exactly is the difference between Disk Cloning and Disk imaging? I am using Macrium Reflect to make a backup of my Windows C drive, but I'm not sure which one to use.
View 14 Replies
View Related
