setup two routers (Netgear N600 routers)? In House A (My Barn) I have 3 camera's hook up to my router. In House B (My House), I have a N600 hookup to my modem and 3 of my computers. What would it take to be able to hook up House A to House B, so that I can view my House A camera's?
View 6 RepliesBut I cannot get my NEW Netgear N600 router to communicate with a NEW Netgear WN 3000 RP extender.The instructions say to press the WPS button on the extender then the WPS button on the router. No WPS button exists on the router!The instructions also I can use any wireless network manager utility to set this up. Can't find where this is in Windows 7.The I pad has found the NETGEAR_EXT address but won't connect. And the light on the extender does no indicate teh router is communicating with it.
View 3 Replies View RelatedI have a peculiar network setup that causes me to require two routers.My laptop connects to router B, which then connects to router/adsl-modem A.
{Internet} ===MTU:1460===> [A] ---MTU:????---> [B] ===> Laptop
I have set up router A with all the correct settings provided by my ISP, one specifically being the MTU of 1460.I now need to know what I should set router B's MTU at. Should it be the same at 1460, or the full network speed of 1500.
I am running Windows 7 RC 7100 (of course) and I'm wanting to get a network setup between two computers over two routers. Here's my story:
I just moved in with two of my friends and we have 6 computers (3 laptops and 3 desktops) and we have 2 360s and 1 ps3. So needless to say my friends 5 port router wasn't enough for all the equipment so we decided to use my router with his.
Now after a day of configuring we have it running smooth and playing games with no troubles but there is one problem we want to access media on the ps3 from all the computers. I can access my media from the ps3 no problem since I'm on the same router as it but I can't access my friend media because he is on the 2nd router.
We have two belkin routers the main one has my friends PC, his 360, his ps3, and my router connected to it. My router has the remaining two pcs and my ps3 connected to it. Does anyone have a solution to this problem? I have tried putting the systems on one work group but that failed.
I also tried connecting to one homegroup but I can't detect his group and vice versa. If anyone could tell me how to set this up I would be grateful. My friend thinks it's might involve the routers DHCP but I'm not sure.
The scenario is: I have a PC running Windows 7 which is wirelessly connected to my Netgear modem-router. I wish to install a security camera outside my house, instead of running a long ethernet cable all the way back into my house from the camera to the Netgear, is it possible that I can connect the camera to another router outside, and then get that second router to communicate with my Netgear inside the house, and thus be able to control my security camera from inside?
Now I know the security camera can be connected to a router, and I can install software to remotely control it, but I'm not sure how I can go about using my Netgear to communicate to a second router. I haven't purchased the second router or the camera yet, but I want to know if it's possible before I do.
I am planning on holding a LAN Party in a month or 2 and requier a bit of help because it is my first. About 6 - 10 people will be coming.
I need help on a few things and any imput people could put in would be greatly appreciated because I am very lost!
I was planning on purchasing a switch (Still not sure what to purchase yet. I am looking for something around 10 ports) and connecting it directly by a network cable to my Belkin Wireless G Universal Range Extender Router. Then connecting all the computers to the switch. All the computers connected to the switch will be running either XP, Vista or 7.
Is this going to work? What kind of settings am I going to need to change on the OS's to make them all be able to interact with each other in the games. Are their easier ways to do this?
I have no previous networking experience and am only 14, so go easy.
802.11n wireless router: is this hardware supported by all windows operating systems?I am planning to buy one for my brother, he is using windows XP. I am using Windows 7, and my brother in-law is using windows Vista. We all play WoW or Heroes of Newerth together in my bro's house. So I am wondering if this would work for all the three computers. Also my brother who has XP is using a Desktop.Does it need any Wireless adapters for it to recognize the signal from the router?
View 5 Replies View RelatedMy Router is dying ( Always needs re-booting ), so i decided to get a new one, after some reading i found that N routers are the Top now, but you need a laptop that support N routers . My question is how can i know if my laptop support A G or N routers .
Laptop : Dell Inspiron 1545
Network adapter : Dell Wireless 1397 WLAN Mini-Card
Marvel Yukon 88E8040 PCI-E Fast Ethernet Controller
OS : Windows 7
I have 2 wireless routers/switches in my house. I have a router downstairs and one upstairs My setup is currently like this Downstairs: Computer Printer Modem Upstairs computer HTPC (media center pc) I use the printer on the downstairs computer to print everything, and this used to work fine until I installed a new router upstairs. My old setup was that upstairs I had a wireless router, and a separate switch, and the router was feed internet through the switch. Now that I installed a router/switch combo, I cant see any computers except for whats directly connected to the upstairs router.
View 4 Replies View RelatedI have a netgear router wgt624 v2. I've had it since 2003 or 04. when I got it my network seemed to be fast and connections to it quick.now sometimes my wireless seems to have a moment or two where it searches for a connection. I figured that was due to all of the neighbors who now have wireless too. and sometimes now devices are having ip conflicts. for example my printer is set to use a static ip and the router will often give that ip to my laptop. so then the printer will not work unless I restart the laptop.
View 9 Replies View RelatedFor some reason the network from point A to B keeps failing. Going to explain the set up I have right now. DSL and modem are in room 1 then that plugs into the wall to the switch in room 2. Many things are connected to the switch, roku player, dish network receiver and other Ethernet connections for other rooms and a router so we can get wifi. Now for some reason the connection from the switch to the modem keeps going out. The internet works just fine because i can plug the ethernet cable from the modem directly to a computer in the office. However from a computer in another room I cannot cmd ping the modem says 0%. What would cause this to fail, it works for hours then i have to unplug/re-plug the cables to get it working again.
View 9 Replies View RelatedHow can I be connected to multiple routers? So I can, for example, have one wired connection and maybe two wireless connections? Do I have to have many network cards, or can I use a program or so?
View 5 Replies View RelatedMy Nephew has a very long house and a computer cannot get a signal from the wireless router which is at the other end of the house. He doesn't want to run RJ45 cables. Could he use 2 routers so the second one connects wireless to the first one which is connected to his adsl phone socket by a ethernet cable. If so how would I go about setting them up, settings wise. If so would the computer also be able to talk to each other to be able to transfer files etc to each other.. (enable workgroup & sharing drives/folders) I know how to setup this bit.
View 4 Replies View RelatedWhat is the process that goes on when data is transmitted between two routers?
View 2 Replies View RelatedWindows 7 home premium 64 bit I have a D-Link DIR 825 router and when I open Network & sharing, under Network Infrastructure I see a Linksys wrt110, at times it's icon goes away for a few minutes, then re-appears, If I right click on the icon I don't get a delete option (greydd out), if I select properties I'm asked for a PIN number. I don't own a Lynksys router and I'm wondering why it's showing up on my network?
View 9 Replies View RelatedI'm having to write this because my old bridged network worked so well for so long that I totally forgot how I ever set it up in the first place, but I recall that it was simple and involved:
- The two were connected via wifi - the primary one having a physical connection to roadrunner modem
- The two had the same SSID, same Security method and passkey, different base IP addresses [192.168.1.1, and 192.168.1.21]
- beyond that it gets hazy... what "mode" was the secondary in? somewhere I input to the subordinate router the MAC address of the primary router... dunno where/which field accepted that
- do both need to be set to a fixed & same channel, as opposed to variable/Auto?
- what all was turned off on the secondary?
- both had full use of both their wired connections/clients and wifi
- one of these is N-300mbps, and g/b, the other is g/b. do I need to limit anything?
Its not necessarily important to me that the connected devices all share with one another - I have strange clients anyway and its not needed. the windows 7 devices will be ok on the homegroup.
I have a wireless router linksys connected to the modern witch is on the second floor. I want to connect another router linksys on the same network that the one on the second floor is on, wirelessly without any cords on the first floor.
View 15 Replies View RelatedI have an Asus laptop with Windows 7 and a netgear N600 router and I can't connect to it or any Netgear networks. I can connect to other networks and others can connect to my network and all other devices work except my laptop.
View 4 Replies View RelatedI noticed a few days ago that I cant access my router anymore "http://192.168.1.1/"I had some network problems so I uninstalled hamachi. Ethernet 24mbps connection crashes every 10mins~There's the thread I made, and all of the changes I did I posted there. So if you read the thread. When I got back home and after few days I noticed that I can't connect to the router anymore. ipconfig just displays some random "85.157.0.1" which doesn't work.
View 9 Replies View RelatedI earlier (roughly 6months ago) made a topic about this. (Can't access routers webpage / control page anymore.)
I recently got a brand new computer with a fresh copy of Windows 7 Pro 64-bit SP1 and the same problem is still there. The problem is: I can't access the routers webpage when I'm using ethernet. It's fine when I'm using wireless, but the thing is I don't have a adapter built in to the pc, so I had to use a USB adapter which my brother took.
So, I'm stuck with the ethernet cable. I got two cables, both of them give the same results, so atleast it shouldn't be the cable or such. Also, I can easily access the page on my mobile and laptop.
My laptop was hooked up by broadband cable to the faceplate and was working fine, but now both cabled and wireless internet don't work, however I can connect to wifi on mobile. The troubleshooter does not run, it just reads error. I bought a brand new cable but still no luck, have tried undoing system updates but it has merely made it worse
View 2 Replies View RelatedI am trying to setup a DrayTek firewall (DrayTek Vigor 2830) with my Netgear 24port Managed Switch (Netgear GS724TS). The DrayTek works fine when plugged directly into a PC however once plugged into the switch the computers connected cannot seem to get an IP even when setting statically. I have been told things like multicast need to be off for the data to translate this is off on my settings, I must be missing a setting?
View 9 Replies View RelatedRecently networked a seagate free agent hard drive 1.5tb on my belkin hd n600 router want to write protect my drive so nobody else can add or delete anything how can I do this ?
View 5 Replies View RelatedI have an Hewlwtt Packard HP Color LaserJet 2840 which is connected via USB to a Belkin PLAY N600 DB router, which is connected to my PC with Windows 7 Home Premium 64 bit.
I have been to the HP webstie and it tells me to use the drivers that came with Windows 7.
So in the Devices & Printers window it is there, labelled as HP Color LaserJet 2800 series and when I try to print I get an error.
I'm guessing it is something to do with the driver as I cannot scan at all, it just tells me there is no scanner connected!!
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies View RelatedI have 7 Ultimate. I was recently given a NetGear WG311 V3 54/mbs Pci card. Can't seem to find out why it won't work. So many things wrong in my Os atm, but this for now. I tried the Marvell driver. Nope! Absolutely nothing in my Devices and PrintersI installed the Smart Wizard. Again, nope! I tried un-installing and re-installing both. Same as before, nope! The software, when clicked, flashes a small icon in the tray, then, bam. Gone. I now have a signal bar, with a red cross, as if my device was disabled. (Like on a laptop.)
View 7 Replies View RelatedIt has more of a driver issue than a hardware, but it could be a hardware issue. I desperatley need help, as if I don't get my brother's computer to have internet, I won't be able to use a new laptop I just ordered.
View 7 Replies View RelatedI have uploaded a modified Windows 7 x86/x64 driver for the USB Netgear WG111T
Send big files the easy way. Files too large for email attachments? No problem! This is a modification of the drivers for the USB Siemens Gigaset 108, which has the same core Atheros 5523 chipset
It should be compatible with the following operating systems:Windows 7 (x64) - tested this myself, the others are not yet tested Windows 7 (x86) Windows Vista (x64) Windows Vista (x86) Hope this helps everyone!
i can not get my netgear WG311v3 54MB wireless pci adapter to work Device manager say the device cannot start (code 10)
so i tried update drivers and windows says i have the most up todate drivers for it. so i uninstalled the driver to try and get windows to reinstall the drivers but it fails any help please. i have looked on the netgear website and they say wwindows should install the drivers automatically, but no.
i have windows 7 64bit 4Gb ram
Just installed windows 7 64 bit.
I'm using a pci wireless adapter chip, Netgear wg311v3 I installed the netgear driver automatically, and then installed the netger smart wizard. However, the smart wizard will not start up. I've done some research, and apparently netgear doesn't make 64bit drivers. I've also tried using the chipset driver which is a Marvell 88w8335. But I may not have used the right driver.
To sum it up:
I have a netgear wg311v3 adapter. Running Windows 7 64bit. It won't run the wizard.
What should I do? Do I need to go back to 32 bit?
I'm running a Netgear PS121v2 usb print server. It had no issues under XP but within Vista / Windows 7 there was a defect.
The driver for the V2 when installed came up as unsigned, therefore the installation wouldn't proceed any further.
I looked around the net, and a few people had found a workaround with installing the printer manually within Vista.
For me this still didn't work, as when the test page prints, it hangs one line from the end.
The netgear support site stated that the driver for the PS121v2 was compatible with XP through Vista 32 and 64bit.
So I took a chance and did the following:
Solution:
Download the Drivers for the PS121v1
The difference from what I gather after reading some technical papers is that the firmware in the v2 allows for sharing of the multifunctions of multifunction printers.
The PS121v1 software is signed for Vista and installed no problem.
I first connected the printer (an officejet 4100 series) to the PC and Windows 7 found all the necessary drivers. - impressive as HP's own site says that it doesn't support vista.
I then connected the printer to the PS121 on the router, and installed the PS121v1 drivers.
The drivers configure the existing printer setup to run on the printserver by modifying it's port details and settings.
Prints fine, with no glitches.