Can't Access Routers Webpage / Control Page
Jun 16, 2012
I noticed a few days ago that I cant access my router anymore "http://192.168.1.1/"I had some network problems so I uninstalled hamachi. Ethernet 24mbps connection crashes every 10mins~There's the thread I made, and all of the changes I did I posted there. So if you read the thread. When I got back home and after few days I noticed that I can't connect to the router anymore. ipconfig just displays some random "85.157.0.1" which doesn't work.
View 9 Replies
ADVERTISEMENT
Jan 15, 2013
I earlier (roughly 6months ago) made a topic about this. (Can't access routers webpage / control page anymore.)
I recently got a brand new computer with a fresh copy of Windows 7 Pro 64-bit SP1 and the same problem is still there. The problem is: I can't access the routers webpage when I'm using ethernet. It's fine when I'm using wireless, but the thing is I don't have a adapter built in to the pc, so I had to use a USB adapter which my brother took.
So, I'm stuck with the ethernet cable. I got two cables, both of them give the same results, so atleast it shouldn't be the cable or such. Also, I can easily access the page on my mobile and laptop.
View 9 Replies
View Related
Apr 9, 2011
just installed IE9 and the first thing I noticed when I acess some websites is a box in the middle of the page saying " Message from webpage: "Please wait for the page to load..." it is really annoying and pops up several times if I close it or press ok
View 2 Replies
View Related
Dec 10, 2012
setup two routers (Netgear N600 routers)? In House A (My Barn) I have 3 camera's hook up to my router. In House B (My House), I have a N600 hookup to my modem and 3 of my computers. What would it take to be able to hook up House A to House B, so that I can view my House A camera's?
View 6 Replies
View Related
Apr 3, 2012
internet connecting thru modem but unable to access web page dns - error, I have a Internet connection by the Lan provider, If I connect thru his connection it works but If I connect thru Data Card - In network section I find that there is no "internet connection". But the modem showing the connection. If I try to open any webpage it gives DNS error or web page not reachabl
View 2 Replies
View Related
Aug 7, 2012
Can't access web page for ip-address 192.168.1.1
View 1 Replies
View Related
Sep 2, 2012
I cannot access the notification area icons page neither from control panel nor from the taskbar pop up to customize, the page in explorer stays loading and it goes nowhere. im running windows 7 ultimate in an asus notebook.i recently deleted some programs used to hide the taskbar and interrupted and remove and installation of uxstyle, but dunno if that is related.
View 2 Replies
View Related
Dec 7, 2010
I've set my router on bridging mode, and now i can't access my router page. My router is a ZyXEL P602HW-D1A.
View 4 Replies
View Related
Oct 4, 2011
When I click on the control panel icon on my desktop nothing happens. When I click on start>control panel I get the same result. I have a power options icon on my desktop and that does not work either. If I right click the power options icon and choose open file location the control panel opens normally. Everything works fine in safe mode though.
View 5 Replies
View Related
Jun 1, 2011
I can open control panel but it won't work. Click on file and cannot delete and I am the administrator.
View 1 Replies
View Related
Jan 31, 2012
How can I find "Internet Options in my Windows 7? I need to change my font and color. But when e-mailing, I have to change it with each message! I hate windows 7!
View 1 Replies
View Related
May 27, 2011
Everytime I click on any item in the control panel the application freezes. What should I do?I have admin rights I am running Panda virus I can still access everything but I have to go the long way round.
View 3 Replies
View Related
Jun 8, 2011
Recently, I lost access to many of the programs from my desktop. For example...when I try to open My Computer, or Recycle Bin, or Control Panel, I get an error panel stating....."This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel." Unfortunately, I cannot access the Default Programs program either, for the same reason.
View 9 Replies
View Related
Oct 1, 2011
got a new computer about a month ago and immediately installed Avast as anti-virus. Also have been using Peerblock. Haven't visited any sketchy websites or opened any suspicious e-mails/programs as far as I remember. Last night, I noticed my network icon in the bottom right showed a red "X" even though I am still able to use the internet. I then noticed I would get an error whenever I tried to click the icon to access my directories under explorer or access the control panel. The error message in each instance is "Windows cannot access the specified device path or file. You may not have the appropiate permission to access the item."I am the only user on the computer so am the Administrator. I have 2 Harddrives, both have Windows 7 64-bit installed, the primary being a solid-state drive, and the other being a conventional HD. I ran a full Avast check which didn't find much, just 1 sketchy mp3 I've had for a long time on one of my external HDs (I have 2 connected total) which didn't solve the problem. Also downloaded and ran Spybot S&D which found 2 things but correcting those didn't solve problem. I've rebooted several times and nothing has changed in terms of my access.Also, sometimes when I'm trying to install something it'll say that Windows Installer is messed up and I can't even seem to replace that via the files I tried to download off microsoft's website.I haven't tried booting from my conventional internal HD but I'm afraid that'll get corrupted too so I'm hesitant to yet.
View 3 Replies
View Related
Mar 4, 2011
Cannot access control panel items on Windows 7...Pop up message shows c:WINDOWSsystem32 undell32.exe Application not found..Lost without control panel features.Is correction fix to activate control panel possible?..
View 11 Replies
View Related
Jan 7, 2013
I am all of a sudden unable to access explorer or control panel, am getting "Windows cannot access the specified device, path, or file. You may not have appropriate permissions to access the item. My internet connection icon in task bar shows no connections but I am able to access the internet. My Sound icon says the Audio service is not running. Machine will not boot into safe mode, can't access explorer from command line, anti-virus (Panda) will not run, Lavasoft Ad-Aware will not run and have been able run a virus scan from Trend Micro (Housecall) and it found nothing..
View 3 Replies
View Related
Aug 22, 2012
I am trying to have my computer the most secure as possible. I have a firewall, antivirus, anti-malware, etc. But I was wondering is it possible to have on your computer even with an anti-virus, a malicious program that allow Remote Desktop Control access (something like ProRat trojan or teamviewer)? Because I am suspecting that someone I know could had install/changed something on my computer. I know those suspicion might not be founded but in anyway I would like to understand how it work.
1. Is there any malicious application that allow Remote Desktop access that cannot be found by anti-virus? (I know it could be put in the list of exception on the anti-virus).
2. What can I do to be 100% sure that absolutely no one could access my computer (or just see my screen from their computer).
View 2 Replies
View Related
Sep 24, 2011
I can't access my Window Exploer Panel. It crashed few second after being access.
Also Selecting another use causes a similar problem. To select a new user, I use "Window button + L"
View 3 Replies
View Related
Apr 28, 2012
I watch videos from this site Poker Netcast | Live At The Bike | LABTTheir login is https.Ive been in IT for 15 years and even this has stumped me.When I go to login in IE9 starts looping from the login page to the https page and back to the original page and never ends. I load firefox, same issue. I load Crome, it worked for 1 day then same issue. It used to login in fine last week. It logs in fine on my 2 other PCs and my Kindlefire.I have checked for viruses with Avast and A-Malware Bytes in safe mode - nothing. These 2 pick up 98% of stuff. Personally I dont think its a virusn IE9 - Deleted browsing history, cookies, temp internet files, everything under the Geneeral/Browsing History section. Did a disk cleanup, put the site inthe trusted zone, turned off popup blocker just in case, Cleared SSL state, Reset IE9. Zippo
View 1 Replies
View Related
Jul 11, 2012
After doing an alleged successful system restore (from restore point 3 days prior) when I try to access the CP or My Computer I get message saying Windows cannot access specified device, path or file, You may not have access permission. (I am the sole user & Administrator)
View 5 Replies
View Related
Apr 15, 2012
my laptop was working now it won't print i can't access print manager, it won't recognise the external hard drive i can't get at the control panel, i've run a full scan alls well!? tried various prompts
View 1 Replies
View Related
May 12, 2011
I have a peculiar network setup that causes me to require two routers.My laptop connects to router B, which then connects to router/adsl-modem A.
{Internet} ===MTU:1460===> [A] ---MTU:????---> [B] ===> Laptop
I have set up router A with all the correct settings provided by my ISP, one specifically being the MTU of 1460.I now need to know what I should set router B's MTU at. Should it be the same at 1460, or the full network speed of 1500.
View 5 Replies
View Related
Jun 3, 2009
I am running Windows 7 RC 7100 (of course) and I'm wanting to get a network setup between two computers over two routers. Here's my story:
I just moved in with two of my friends and we have 6 computers (3 laptops and 3 desktops) and we have 2 360s and 1 ps3. So needless to say my friends 5 port router wasn't enough for all the equipment so we decided to use my router with his.
Now after a day of configuring we have it running smooth and playing games with no troubles but there is one problem we want to access media on the ps3 from all the computers. I can access my media from the ps3 no problem since I'm on the same router as it but I can't access my friend media because he is on the 2nd router.
We have two belkin routers the main one has my friends PC, his 360, his ps3, and my router connected to it. My router has the remaining two pcs and my ps3 connected to it. Does anyone have a solution to this problem? I have tried putting the systems on one work group but that failed.
I also tried connecting to one homegroup but I can't detect his group and vice versa. If anyone could tell me how to set this up I would be grateful. My friend thinks it's might involve the routers DHCP but I'm not sure.
View 5 Replies
View Related
Sep 3, 2011
The scenario is: I have a PC running Windows 7 which is wirelessly connected to my Netgear modem-router. I wish to install a security camera outside my house, instead of running a long ethernet cable all the way back into my house from the camera to the Netgear, is it possible that I can connect the camera to another router outside, and then get that second router to communicate with my Netgear inside the house, and thus be able to control my security camera from inside?
Now I know the security camera can be connected to a router, and I can install software to remotely control it, but I'm not sure how I can go about using my Netgear to communicate to a second router. I haven't purchased the second router or the camera yet, but I want to know if it's possible before I do.
View 9 Replies
View Related
Dec 23, 2009
I am planning on holding a LAN Party in a month or 2 and requier a bit of help because it is my first. About 6 - 10 people will be coming.
I need help on a few things and any imput people could put in would be greatly appreciated because I am very lost!
I was planning on purchasing a switch (Still not sure what to purchase yet. I am looking for something around 10 ports) and connecting it directly by a network cable to my Belkin Wireless G Universal Range Extender Router. Then connecting all the computers to the switch. All the computers connected to the switch will be running either XP, Vista or 7.
Is this going to work? What kind of settings am I going to need to change on the OS's to make them all be able to interact with each other in the games. Are their easier ways to do this?
I have no previous networking experience and am only 14, so go easy.
View 9 Replies
View Related
Apr 9, 2012
i have an intel i5 2400 cpu, combined with 4gb ddr3 memory. mobo is dh67bl - revision 3. no gpu installed.power supply is via corsair vx450.problem i been facing:
1) bsod saying that a clock interrupt wasnt recd. [url]
2) bsod saying: page fault in non paging area. couldnt grab a screenshot for this.
3) display randomly goes off for a split second and reappears.. but the color of the panes go blue (i havent chosen blue. my setting is for clear pane.)[url] this error solves itself after random number of hours/mins
4) display vanishes for a split second and reappears, and a small balloon at the bottom right corner prompts that the display driver had stopped working.
5) system plain hangs/stops responding. randomly happens.. but more so while on Internet, or after hrs of it idling, i come back to the comp and try to scroll the content onscreen.sometime it revives from the stuck state as if nothing happened, sometimes i have to give it a cold boot.
6) while reading forums with blue bands.. the blue bands kinda form blurry bars which stretch till the end of the screen. i tried to grab a screenshot but the screenshots were clean. the bands moved as i dragged the image about.
7) also, my comp's display went off one day and within a second came back with a blue-ish hue. it restored itself but again has gone back to blue-ish.
other relevant information:
windows 7 x64
no other os resides/installed on system
full retail version
os was installed in july.
View 7 Replies
View Related
Aug 6, 2011
802.11n wireless router: is this hardware supported by all windows operating systems?I am planning to buy one for my brother, he is using windows XP. I am using Windows 7, and my brother in-law is using windows Vista. We all play WoW or Heroes of Newerth together in my bro's house. So I am wondering if this would work for all the three computers. Also my brother who has XP is using a Desktop.Does it need any Wireless adapters for it to recognize the signal from the router?
View 5 Replies
View Related
Jul 27, 2010
My Router is dying ( Always needs re-booting ), so i decided to get a new one, after some reading i found that N routers are the Top now, but you need a laptop that support N routers . My question is how can i know if my laptop support A G or N routers .
Laptop : Dell Inspiron 1545
Network adapter : Dell Wireless 1397 WLAN Mini-Card
Marvel Yukon 88E8040 PCI-E Fast Ethernet Controller
OS : Windows 7
View 5 Replies
View Related
Apr 23, 2011
I have 2 wireless routers/switches in my house. I have a router downstairs and one upstairs My setup is currently like this Downstairs: Computer Printer Modem Upstairs computer HTPC (media center pc) I use the printer on the downstairs computer to print everything, and this used to work fine until I installed a new router upstairs. My old setup was that upstairs I had a wireless router, and a separate switch, and the router was feed internet through the switch. Now that I installed a router/switch combo, I cant see any computers except for whats directly connected to the upstairs router.
View 4 Replies
View Related
Oct 20, 2011
I have a netgear router wgt624 v2. I've had it since 2003 or 04. when I got it my network seemed to be fast and connections to it quick.now sometimes my wireless seems to have a moment or two where it searches for a connection. I figured that was due to all of the neighbors who now have wireless too. and sometimes now devices are having ip conflicts. for example my printer is set to use a static ip and the router will often give that ip to my laptop. so then the printer will not work unless I restart the laptop.
View 9 Replies
View Related
Oct 3, 2012
For some reason the network from point A to B keeps failing. Going to explain the set up I have right now. DSL and modem are in room 1 then that plugs into the wall to the switch in room 2. Many things are connected to the switch, roku player, dish network receiver and other Ethernet connections for other rooms and a router so we can get wifi. Now for some reason the connection from the switch to the modem keeps going out. The internet works just fine because i can plug the ethernet cable from the modem directly to a computer in the office. However from a computer in another room I cannot cmd ping the modem says 0%. What would cause this to fail, it works for hours then i have to unplug/re-plug the cables to get it working again.
View 9 Replies
View Related
