My Router is dying ( Always needs re-booting ), so i decided to get a new one, after some reading i found that N routers are the Top now, but you need a laptop that support N routers . My question is how can i know if my laptop support A G or N routers .
Laptop : Dell Inspiron 1545
Network adapter : Dell Wireless 1397 WLAN Mini-Card
Marvel Yukon 88E8040 PCI-E Fast Ethernet Controller
OS : Windows 7
setup two routers (Netgear N600 routers)? In House A (My Barn) I have 3 camera's hook up to my router. In House B (My House), I have a N600 hookup to my modem and 3 of my computers. What would it take to be able to hook up House A to House B, so that I can view my House A camera's?
View 6 Replies View RelatedMy samsung lap top is RV510 I have a problem of Symbol in key board please submit non function keyboard to manage this.
View 1 Replies View RelatedI have a peculiar network setup that causes me to require two routers.My laptop connects to router B, which then connects to router/adsl-modem A.
{Internet} ===MTU:1460===> [A] ---MTU:????---> [B] ===> Laptop
I have set up router A with all the correct settings provided by my ISP, one specifically being the MTU of 1460.I now need to know what I should set router B's MTU at. Should it be the same at 1460, or the full network speed of 1500.
Entering the bios limits me to certain options. Is there anyway to access the other options?
View 3 Replies View RelatedI am running Windows 7 RC 7100 (of course) and I'm wanting to get a network setup between two computers over two routers. Here's my story:
I just moved in with two of my friends and we have 6 computers (3 laptops and 3 desktops) and we have 2 360s and 1 ps3. So needless to say my friends 5 port router wasn't enough for all the equipment so we decided to use my router with his.
Now after a day of configuring we have it running smooth and playing games with no troubles but there is one problem we want to access media on the ps3 from all the computers. I can access my media from the ps3 no problem since I'm on the same router as it but I can't access my friend media because he is on the 2nd router.
We have two belkin routers the main one has my friends PC, his 360, his ps3, and my router connected to it. My router has the remaining two pcs and my ps3 connected to it. Does anyone have a solution to this problem? I have tried putting the systems on one work group but that failed.
I also tried connecting to one homegroup but I can't detect his group and vice versa. If anyone could tell me how to set this up I would be grateful. My friend thinks it's might involve the routers DHCP but I'm not sure.
The scenario is: I have a PC running Windows 7 which is wirelessly connected to my Netgear modem-router. I wish to install a security camera outside my house, instead of running a long ethernet cable all the way back into my house from the camera to the Netgear, is it possible that I can connect the camera to another router outside, and then get that second router to communicate with my Netgear inside the house, and thus be able to control my security camera from inside?
Now I know the security camera can be connected to a router, and I can install software to remotely control it, but I'm not sure how I can go about using my Netgear to communicate to a second router. I haven't purchased the second router or the camera yet, but I want to know if it's possible before I do.
I am planning on holding a LAN Party in a month or 2 and requier a bit of help because it is my first. About 6 - 10 people will be coming.
I need help on a few things and any imput people could put in would be greatly appreciated because I am very lost!
I was planning on purchasing a switch (Still not sure what to purchase yet. I am looking for something around 10 ports) and connecting it directly by a network cable to my Belkin Wireless G Universal Range Extender Router. Then connecting all the computers to the switch. All the computers connected to the switch will be running either XP, Vista or 7.
Is this going to work? What kind of settings am I going to need to change on the OS's to make them all be able to interact with each other in the games. Are their easier ways to do this?
I have no previous networking experience and am only 14, so go easy.
802.11n wireless router: is this hardware supported by all windows operating systems?I am planning to buy one for my brother, he is using windows XP. I am using Windows 7, and my brother in-law is using windows Vista. We all play WoW or Heroes of Newerth together in my bro's house. So I am wondering if this would work for all the three computers. Also my brother who has XP is using a Desktop.Does it need any Wireless adapters for it to recognize the signal from the router?
View 5 Replies View RelatedI have 2 wireless routers/switches in my house. I have a router downstairs and one upstairs My setup is currently like this Downstairs: Computer Printer Modem Upstairs computer HTPC (media center pc) I use the printer on the downstairs computer to print everything, and this used to work fine until I installed a new router upstairs. My old setup was that upstairs I had a wireless router, and a separate switch, and the router was feed internet through the switch. Now that I installed a router/switch combo, I cant see any computers except for whats directly connected to the upstairs router.
View 4 Replies View RelatedI have a netgear router wgt624 v2. I've had it since 2003 or 04. when I got it my network seemed to be fast and connections to it quick.now sometimes my wireless seems to have a moment or two where it searches for a connection. I figured that was due to all of the neighbors who now have wireless too. and sometimes now devices are having ip conflicts. for example my printer is set to use a static ip and the router will often give that ip to my laptop. so then the printer will not work unless I restart the laptop.
View 9 Replies View RelatedFor some reason the network from point A to B keeps failing. Going to explain the set up I have right now. DSL and modem are in room 1 then that plugs into the wall to the switch in room 2. Many things are connected to the switch, roku player, dish network receiver and other Ethernet connections for other rooms and a router so we can get wifi. Now for some reason the connection from the switch to the modem keeps going out. The internet works just fine because i can plug the ethernet cable from the modem directly to a computer in the office. However from a computer in another room I cannot cmd ping the modem says 0%. What would cause this to fail, it works for hours then i have to unplug/re-plug the cables to get it working again.
View 9 Replies View RelatedHow can I be connected to multiple routers? So I can, for example, have one wired connection and maybe two wireless connections? Do I have to have many network cards, or can I use a program or so?
View 5 Replies View RelatedMy Nephew has a very long house and a computer cannot get a signal from the wireless router which is at the other end of the house. He doesn't want to run RJ45 cables. Could he use 2 routers so the second one connects wireless to the first one which is connected to his adsl phone socket by a ethernet cable. If so how would I go about setting them up, settings wise. If so would the computer also be able to talk to each other to be able to transfer files etc to each other.. (enable workgroup & sharing drives/folders) I know how to setup this bit.
View 4 Replies View RelatedWhat is the process that goes on when data is transmitted between two routers?
View 2 Replies View RelatedWindows 7 home premium 64 bit I have a D-Link DIR 825 router and when I open Network & sharing, under Network Infrastructure I see a Linksys wrt110, at times it's icon goes away for a few minutes, then re-appears, If I right click on the icon I don't get a delete option (greydd out), if I select properties I'm asked for a PIN number. I don't own a Lynksys router and I'm wondering why it's showing up on my network?
View 9 Replies View RelatedI'm having to write this because my old bridged network worked so well for so long that I totally forgot how I ever set it up in the first place, but I recall that it was simple and involved:
- The two were connected via wifi - the primary one having a physical connection to roadrunner modem
- The two had the same SSID, same Security method and passkey, different base IP addresses [192.168.1.1, and 192.168.1.21]
- beyond that it gets hazy... what "mode" was the secondary in? somewhere I input to the subordinate router the MAC address of the primary router... dunno where/which field accepted that
- do both need to be set to a fixed & same channel, as opposed to variable/Auto?
- what all was turned off on the secondary?
- both had full use of both their wired connections/clients and wifi
- one of these is N-300mbps, and g/b, the other is g/b. do I need to limit anything?
Its not necessarily important to me that the connected devices all share with one another - I have strange clients anyway and its not needed. the windows 7 devices will be ok on the homegroup.
I have a wireless router linksys connected to the modern witch is on the second floor. I want to connect another router linksys on the same network that the one on the second floor is on, wirelessly without any cords on the first floor.
View 15 Replies View RelatedI noticed a few days ago that I cant access my router anymore "http://192.168.1.1/"I had some network problems so I uninstalled hamachi. Ethernet 24mbps connection crashes every 10mins~There's the thread I made, and all of the changes I did I posted there. So if you read the thread. When I got back home and after few days I noticed that I can't connect to the router anymore. ipconfig just displays some random "85.157.0.1" which doesn't work.
View 9 Replies View RelatedI earlier (roughly 6months ago) made a topic about this. (Can't access routers webpage / control page anymore.)
I recently got a brand new computer with a fresh copy of Windows 7 Pro 64-bit SP1 and the same problem is still there. The problem is: I can't access the routers webpage when I'm using ethernet. It's fine when I'm using wireless, but the thing is I don't have a adapter built in to the pc, so I had to use a USB adapter which my brother took.
So, I'm stuck with the ethernet cable. I got two cables, both of them give the same results, so atleast it shouldn't be the cable or such. Also, I can easily access the page on my mobile and laptop.
My laptop was hooked up by broadband cable to the faceplate and was working fine, but now both cabled and wireless internet don't work, however I can connect to wifi on mobile. The troubleshooter does not run, it just reads error. I bought a brand new cable but still no luck, have tried undoing system updates but it has merely made it worse
View 2 Replies View RelatedI use Help and support frequently. Finding the answer to a problem is one thing, finding it a second time is another. When you're dealing with web pages it's easy to find what you've found a second time. You just copy the URL and paste it somewhere so it can be clicked on in the future, but not so with Help and support.
The only way I know of to find a particular page again is to write down my steps (like in a word processor) and then retrace them. Just wondering if I'm missing something or if there is an easier way?
Tonight I will be configuring a newly-purchased Sony VPCCW290X with Windows 7 Home Premium 64-bit.Almost by accident, I have read/discovered that Windows 7 allegedly either doesn't work with WEP, or doesn't work well with WEP.Our home router is a Netgear WGR614 v9 (802.11g).The reason that we "have" to use WEP is that there is an old Mac laptop on the home network, running OS 9.2 (yes, this is OLD!) that does not support WPA. That is, OS 9.2 does not support WPA, and there is no hardware or patch available making it support WPA.So I've read dozens of threads in these forums about Windows 7 and WEP or WPA, and they just seem to be arguments over whether Windows 7 does or does not support WEP. All I want is a definitive set of instructions of how to get THAT computer to connect to our home network, using WEP.url...is a link to the specific computer, if that matters.I'd imagine that Windows 7 is "backwards compatible" enough to support WEP; I just want to get this new computer onto our home network.
View 9 Replies View RelatedI own a HP HDX-18 Notebook (it has 4GB RAM), and I installed Windows 7 (64 bit) not too long ago. The laptop was being problematic giving me a blue screen of death with a 'Power_Driver_State_Failure' message, so I figured it could be problems with driver compatibility. I formatted the hard drive again, and installed a 32bit version of windows 7.
When I right click and go to 'My Computer', it only acknowledges that 3gb out the 4gb ram is being used. Why is this? Is Windows 7 incapable of supporting up to 4gb ram? Do you guys think I'm better restoring the laptop to factory settings (Vista Home Premium) with the recovery CD?
is there a way to change the icon for a additionally created library(im speaking about libraries like video,documents,music,pictures)
View 3 Replies View RelatedI have an asus p5ld2 motherboard with the realtek audio chipset, gameport, etc. I play several games that utilize a controller plugged into the gameport connector ( 1 of them is an old racing controller from a realrace 2 rc car racing sym) and I am inquiring/wondering if microsoft is or will support such a port or controller arraingement.
I see no controller listed as anything in the device listing, nor an unknown port, etc.
[The following are not the problems i faced on Windows XP]. I've connected my PC via HDMI 1.3!
I installed Windows 7 x64 in my PC. The real big problems i'm facing is with Nvidia.
1. First thing scaling didn't work i tried to fix it but no hopes. Good my monitor had built in scaling.
2. 59hz monitor refresh rate is another pain. My display works perfect in 60.001hz @ 1920x1200 resolution but it still resets to 59hz. Nvidia in there latest driver has informed that its the problem with Windows 7 OS. And microsoft says there is no theartical difference from 59hz and 60hz. Well there is huge difference especially when your play movies via DXVA in Media player classic home cinema where you your full colour range and shaders which causes some kind of boxing and not artifacts! Everything was proper in Windows Xp
3. Finally i don't about other but i've noticed massive difference in colour depth which is set to 32-bit but its showing only 24-bit colours which can easily be noticed in movies and games like Crysis. HDMI 1.2 supports upto 24-bit colour. But PC or PS3 has HDMI 1.3 which support 32-bit same as DVI connection. My monitor has upto 48-bit colour depth so the difference in colours while in 24-bit can be easily noticed.
Seriosuly is this a design flaw or enabling these would cause different problems. If any one has got a solution for this i would be happy to hear!
Is anyone else having problems with WMP12 acting weird when playing .MOV files?
Just try one of these here: NASA - NASA High Definition Video
When skipping ahead in the video WMP encounters an error for me.
Also why is there no association of .MOV with WMP on the web? I don't want to have to download QuickTime to watch apple trailers when WMP supposed plays .MOV files (albeit not very good it seems)
i read that windows 7 has native support for mkv files. yet when i try to open an mkv file in media center it doesnt work. am i missing something? im running Windows 7 pro
View 2 Replies View RelatedI downloaded the WMPTagSupportExtender.1.4.msi file and it installs fine, but when I use WMP, it doesn't seem to do anything. I hear that using this allows WMP to play .flac files along with the Win7Codecs, but nothing's happening. Am I supposed to enable something? If so, how do I do it?
View 3 Replies View RelatedYou guys know if there will be a support for BlueRay integrated with WMC in Windows 7 ?
If you guys know any documentation about this let me know please ! Couldnt find anything !
