Network Between Routers Fail?
Oct 3, 2012
For some reason the network from point A to B keeps failing. Going to explain the set up I have right now. DSL and modem are in room 1 then that plugs into the wall to the switch in room 2. Many things are connected to the switch, roku player, dish network receiver and other Ethernet connections for other rooms and a router so we can get wifi. Now for some reason the connection from the switch to the modem keeps going out. The internet works just fine because i can plug the ethernet cable from the modem directly to a computer in the office. However from a computer in another room I cannot cmd ping the modem says 0%. What would cause this to fail, it works for hours then i have to unplug/re-plug the cables to get it working again.
View 9 Replies
ADVERTISEMENT
Sep 3, 2011
The scenario is: I have a PC running Windows 7 which is wirelessly connected to my Netgear modem-router. I wish to install a security camera outside my house, instead of running a long ethernet cable all the way back into my house from the camera to the Netgear, is it possible that I can connect the camera to another router outside, and then get that second router to communicate with my Netgear inside the house, and thus be able to control my security camera from inside?
Now I know the security camera can be connected to a router, and I can install software to remotely control it, but I'm not sure how I can go about using my Netgear to communicate to a second router. I haven't purchased the second router or the camera yet, but I want to know if it's possible before I do.
View 9 Replies
View Related
Dec 10, 2012
setup two routers (Netgear N600 routers)? In House A (My Barn) I have 3 camera's hook up to my router. In House B (My House), I have a N600 hookup to my modem and 3 of my computers. What would it take to be able to hook up House A to House B, so that I can view my House A camera's?
View 6 Replies
View Related
Mar 20, 2010
Windows 7 home premium 64 bit I have a D-Link DIR 825 router and when I open Network & sharing, under Network Infrastructure I see a Linksys wrt110, at times it's icon goes away for a few minutes, then re-appears, If I right click on the icon I don't get a delete option (greydd out), if I select properties I'm asked for a PIN number. I don't own a Lynksys router and I'm wondering why it's showing up on my network?
View 9 Replies
View Related
Dec 6, 2009
When I try to create a system image on a network location Windows asks for Network credentials for the target location. The credentials I enter are correct but I always get an error message that the location can't be used because the password is not correct (Error code 0x80070056).
Is this a bug in Windows 7? Any way to fix or work around this?
View 3 Replies
View Related
Oct 25, 2011
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies
View Related
Aug 7, 2012
my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3
View 1 Replies
View Related
Sep 16, 2012
Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies
View Related
May 12, 2011
I have a peculiar network setup that causes me to require two routers.My laptop connects to router B, which then connects to router/adsl-modem A.
{Internet} ===MTU:1460===> [A] ---MTU:????---> [B] ===> Laptop
I have set up router A with all the correct settings provided by my ISP, one specifically being the MTU of 1460.I now need to know what I should set router B's MTU at. Should it be the same at 1460, or the full network speed of 1500.
View 5 Replies
View Related
Jun 3, 2009
I am running Windows 7 RC 7100 (of course) and I'm wanting to get a network setup between two computers over two routers. Here's my story:
I just moved in with two of my friends and we have 6 computers (3 laptops and 3 desktops) and we have 2 360s and 1 ps3. So needless to say my friends 5 port router wasn't enough for all the equipment so we decided to use my router with his.
Now after a day of configuring we have it running smooth and playing games with no troubles but there is one problem we want to access media on the ps3 from all the computers. I can access my media from the ps3 no problem since I'm on the same router as it but I can't access my friend media because he is on the 2nd router.
We have two belkin routers the main one has my friends PC, his 360, his ps3, and my router connected to it. My router has the remaining two pcs and my ps3 connected to it. Does anyone have a solution to this problem? I have tried putting the systems on one work group but that failed.
I also tried connecting to one homegroup but I can't detect his group and vice versa. If anyone could tell me how to set this up I would be grateful. My friend thinks it's might involve the routers DHCP but I'm not sure.
View 5 Replies
View Related
Dec 23, 2009
I am planning on holding a LAN Party in a month or 2 and requier a bit of help because it is my first. About 6 - 10 people will be coming.
I need help on a few things and any imput people could put in would be greatly appreciated because I am very lost!
I was planning on purchasing a switch (Still not sure what to purchase yet. I am looking for something around 10 ports) and connecting it directly by a network cable to my Belkin Wireless G Universal Range Extender Router. Then connecting all the computers to the switch. All the computers connected to the switch will be running either XP, Vista or 7.
Is this going to work? What kind of settings am I going to need to change on the OS's to make them all be able to interact with each other in the games. Are their easier ways to do this?
I have no previous networking experience and am only 14, so go easy.
View 9 Replies
View Related
Aug 6, 2011
802.11n wireless router: is this hardware supported by all windows operating systems?I am planning to buy one for my brother, he is using windows XP. I am using Windows 7, and my brother in-law is using windows Vista. We all play WoW or Heroes of Newerth together in my bro's house. So I am wondering if this would work for all the three computers. Also my brother who has XP is using a Desktop.Does it need any Wireless adapters for it to recognize the signal from the router?
View 5 Replies
View Related
Jul 27, 2010
My Router is dying ( Always needs re-booting ), so i decided to get a new one, after some reading i found that N routers are the Top now, but you need a laptop that support N routers . My question is how can i know if my laptop support A G or N routers .
Laptop : Dell Inspiron 1545
Network adapter : Dell Wireless 1397 WLAN Mini-Card
Marvel Yukon 88E8040 PCI-E Fast Ethernet Controller
OS : Windows 7
View 5 Replies
View Related
Apr 23, 2011
I have 2 wireless routers/switches in my house. I have a router downstairs and one upstairs My setup is currently like this Downstairs: Computer Printer Modem Upstairs computer HTPC (media center pc) I use the printer on the downstairs computer to print everything, and this used to work fine until I installed a new router upstairs. My old setup was that upstairs I had a wireless router, and a separate switch, and the router was feed internet through the switch. Now that I installed a router/switch combo, I cant see any computers except for whats directly connected to the upstairs router.
View 4 Replies
View Related
Oct 20, 2011
I have a netgear router wgt624 v2. I've had it since 2003 or 04. when I got it my network seemed to be fast and connections to it quick.now sometimes my wireless seems to have a moment or two where it searches for a connection. I figured that was due to all of the neighbors who now have wireless too. and sometimes now devices are having ip conflicts. for example my printer is set to use a static ip and the router will often give that ip to my laptop. so then the printer will not work unless I restart the laptop.
View 9 Replies
View Related
Nov 21, 2009
How can I be connected to multiple routers? So I can, for example, have one wired connection and maybe two wireless connections? Do I have to have many network cards, or can I use a program or so?
View 5 Replies
View Related
Jan 19, 2010
My Nephew has a very long house and a computer cannot get a signal from the wireless router which is at the other end of the house. He doesn't want to run RJ45 cables. Could he use 2 routers so the second one connects wireless to the first one which is connected to his adsl phone socket by a ethernet cable. If so how would I go about setting them up, settings wise. If so would the computer also be able to talk to each other to be able to transfer files etc to each other.. (enable workgroup & sharing drives/folders) I know how to setup this bit.
View 4 Replies
View Related
Nov 6, 2012
What is the process that goes on when data is transmitted between two routers?
View 2 Replies
View Related
May 25, 2012
I'm having to write this because my old bridged network worked so well for so long that I totally forgot how I ever set it up in the first place, but I recall that it was simple and involved:
- The two were connected via wifi - the primary one having a physical connection to roadrunner modem
- The two had the same SSID, same Security method and passkey, different base IP addresses [192.168.1.1, and 192.168.1.21]
- beyond that it gets hazy... what "mode" was the secondary in? somewhere I input to the subordinate router the MAC address of the primary router... dunno where/which field accepted that
- do both need to be set to a fixed & same channel, as opposed to variable/Auto?
- what all was turned off on the secondary?
- both had full use of both their wired connections/clients and wifi
- one of these is N-300mbps, and g/b, the other is g/b. do I need to limit anything?
Its not necessarily important to me that the connected devices all share with one another - I have strange clients anyway and its not needed. the windows 7 devices will be ok on the homegroup.
View 2 Replies
View Related
Jan 9, 2013
I have a wireless router linksys connected to the modern witch is on the second floor. I want to connect another router linksys on the same network that the one on the second floor is on, wirelessly without any cords on the first floor.
View 15 Replies
View Related
Jun 16, 2012
I noticed a few days ago that I cant access my router anymore "http://192.168.1.1/"I had some network problems so I uninstalled hamachi. Ethernet 24mbps connection crashes every 10mins~There's the thread I made, and all of the changes I did I posted there. So if you read the thread. When I got back home and after few days I noticed that I can't connect to the router anymore. ipconfig just displays some random "85.157.0.1" which doesn't work.
View 9 Replies
View Related
Jan 15, 2013
I earlier (roughly 6months ago) made a topic about this. (Can't access routers webpage / control page anymore.)
I recently got a brand new computer with a fresh copy of Windows 7 Pro 64-bit SP1 and the same problem is still there. The problem is: I can't access the routers webpage when I'm using ethernet. It's fine when I'm using wireless, but the thing is I don't have a adapter built in to the pc, so I had to use a USB adapter which my brother took.
So, I'm stuck with the ethernet cable. I got two cables, both of them give the same results, so atleast it shouldn't be the cable or such. Also, I can easily access the page on my mobile and laptop.
View 9 Replies
View Related
Sep 1, 2011
My laptop was hooked up by broadband cable to the faceplate and was working fine, but now both cabled and wireless internet don't work, however I can connect to wifi on mobile. The troubleshooter does not run, it just reads error. I bought a brand new cable but still no luck, have tried undoing system updates but it has merely made it worse
View 2 Replies
View Related
Feb 10, 2011
i'm having problem when opening inbox from my ymail .this message come out "an add on for this website fail tO run.check the security setting in internet option for potential conflicts".
View 9 Replies
View Related
Apr 19, 2011
I've got a new BenQ G2420HD series LCD monitor and an HD enabled, windows seven ultimate, 64bit pc. However, when I connect my monitor to my PC using HDMI, my PC detects it (I've checked with a second monitor), it knows the name of it and can change the resolution etc. quite happily but no display shows on the monitor. The monitor just says 'no cables connected'. It works fine if I connect it with a DVI cable (haven't bothered trying VGA) but I want HD!
View 3 Replies
View Related
Jun 24, 2011
I just recently bought an Acer Aspire 5532 from a friend of mine. Everything was working fine for days, until I powered down using the power button rather than the shut down button on-screen. Ever since then, when I turn on the computer it reads "Windows failed to start. A recent hardware or software change might be the cause." I have the options to either 1. launch startup repair (which freezes the computer) or 2. Start windows normally (which takes me back to the start). I have no installation disk, I've tried safe mode (freezes) along with last good configuration?
View 2 Replies
View Related
Apr 8, 2011
Everytime I try to update my BIOS on my laptop I get this error: BIOS update failed!New Bios is not compatible with the current system BIOS. New BIOS part number doesn't match system BIOS part number. Error Code: -120See the for troubleshooting
View 5 Replies
View Related
Apr 29, 2011
I recently downloaded and installed a set of Windows Updates that came out on 4/26. I had about 8 of them. 4 of them installed successfully but 4 of them were downloaded and installed(on shutdown) but fail to configure on startup. The four I'm having issues with are:
KB2492386
KB2515325
KB2522422
KB982018
Each of these are updates for Windows 64-bit. I was wondering if anyone else was having issues with these as well. I plan on waiting a day or two and try again. I've tried twice today with no success.For future reference, what can cause an update to fail to configure?
View 6 Replies
View Related
Apr 30, 2011
Our laptop prompted a download and installation of SP1 Win7 and we pressed ok. The installation became stuck and warned do not shut down computer but it stayed in this state for over four hours. We had to "hard" boot the computer and on reboot it tried to install the new update. The system became stuck on " Fatal error C0000034 applying update operation 236 of 80331 (_000000...) " Then we started normally but the system identifies improper shutdown and runs system recovery (Lenovo) We choose "go to system recovery point" and after some time the system reboots and goes back to " Fatal error C0000034 applying update operation 236 of 80331 (_000000...).
View 3 Replies
View Related
Oct 30, 2012
I had a new external HDD WD My Book Essential USB 3.0 (2TB) 6 month ago. All was good until two days ago. I rebooted my computer and I won't boot up. After disconnecting WD HDD it work perfectly But after I turned my PC off, and tried to turn it on, again it won't boot up with the HDD connected AND some weird ticking noise started in HDD itself. I sounds like it's trying to boot but failing and trying again. So I disconnected, boot up the system and then plugged it in. Nothing Not in explorer, not in disk management not in Acronis program, nothing.I rebooted and it showed and Local Disk R, but I can't even start disk management or open it with explorer, or even open any program to be able to see/fix it. In the end, HDD wasn't even turning on.So the next day I called tech support of WD. They told me standard stuff, like "Disconnect, Reconnect Try another port, etc ". Nothing. By warranty they can replace it, BUT I don't care about the drive itself, I need data. In this case they can't help me. All they told me is to contact special company for that, and it's gonna cost me up to 1000$.After that call, I noticed a burning smell from HDD. It was connected to power and USB. I disconnected and I opened the case of my HDD. SATA HDD itself seams to be fine, but the connection board (with USB and power) burned.So, I connected directly via SATA to my PC. And that's when the fun starts: BIOS did not recognized it. I switched the SATA port. BIOS showed the model and everything but it gives me "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed." Reboot.In different software... NOTHING. Reboot again: and again "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed". Reboot. S.M.A.R.T. Command Failed... Reboot 5 times, all good. Started LiveBoot CD by Wondershare. It found my HDD and UNKNOWN. Was trying to recover data from it, program freeze. Reboot again. Was trying to fix mbr with Win 7 Boot Cd, nothing cuz it can't see were to fix mbr. Reboot. Started HDAT2. Nothing. Reboot 10 times, and HDAT2 finally can see my HDD. Before I start any test I shows me read error from UNKNOWN DEVICE. Started "hdat2 most powerful test". Nothing. No errors was found. O_o. Also I try Read MBR with the same HDAT2. Everything 0/0/0/0. So what else I can possibly try?? Oh yeah, when I connected my HDD via SATA, that "boot or not to boot" sound was still there.
View 5 Replies
View Related
Mar 26, 2011
Yesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
View 1 Replies
View Related
