Windows 7 home premium 64 bit I have a D-Link DIR 825 router and when I open Network & sharing, under Network Infrastructure I see a Linksys wrt110, at times it's icon goes away for a few minutes, then re-appears, If I right click on the icon I don't get a delete option (greydd out), if I select properties I'm asked for a PIN number. I don't own a Lynksys router and I'm wondering why it's showing up on my network?
View 9 RepliesThe scenario is: I have a PC running Windows 7 which is wirelessly connected to my Netgear modem-router. I wish to install a security camera outside my house, instead of running a long ethernet cable all the way back into my house from the camera to the Netgear, is it possible that I can connect the camera to another router outside, and then get that second router to communicate with my Netgear inside the house, and thus be able to control my security camera from inside?
Now I know the security camera can be connected to a router, and I can install software to remotely control it, but I'm not sure how I can go about using my Netgear to communicate to a second router. I haven't purchased the second router or the camera yet, but I want to know if it's possible before I do.
For some reason the network from point A to B keeps failing. Going to explain the set up I have right now. DSL and modem are in room 1 then that plugs into the wall to the switch in room 2. Many things are connected to the switch, roku player, dish network receiver and other Ethernet connections for other rooms and a router so we can get wifi. Now for some reason the connection from the switch to the modem keeps going out. The internet works just fine because i can plug the ethernet cable from the modem directly to a computer in the office. However from a computer in another room I cannot cmd ping the modem says 0%. What would cause this to fail, it works for hours then i have to unplug/re-plug the cables to get it working again.
View 9 Replies View Relatedsetup two routers (Netgear N600 routers)? In House A (My Barn) I have 3 camera's hook up to my router. In House B (My House), I have a N600 hookup to my modem and 3 of my computers. What would it take to be able to hook up House A to House B, so that I can view my House A camera's?
View 6 Replies View Relatedi recently installed Windows 7 on a Dell Vostro 1310 Laptop. Everything is running very smooth, no problems whatsover but one, which i just cant figure out!
WLAN was working like a charm. Could connect and use the internet without a problem. Yesterday i took my laptop to my gf's, and tried to connect to her router, but the list of available networks just wont show that one. It shows like ten other networks, but the one i need is not displayed.
With another Laptop (Vista) i could connect without a problem and good connection, so could i with my HTC Touch.
I tried manually setting up a connection to that particular network but it didnt help either.
Is that a common problem, or does anybody can help me in any way? Im really out of ideas.
I was on a flight with EasyJet today, and, the cabin manager confirmed that WiFi was available on the aircraft, and, as a matter of fact Windows 7 was indicating that new connections were available, however, I had a blonde moment. I could not browse anywhere to discover the name of the network and try to connect. I think that this is a design flaw, as WinXP allows users to discover new SSIDs, or else the SSID is configured in some way that it cannot be found is it possible?
View 2 Replies View RelatedWindows did not show any network connections in the network connections window. I tried everything that I could find online but nothing worked. As a last resort I decided to reinstall the driver for my Intel 82566DC-2 Gigabit network connection. I uninstalled the old driver and then installed the latest drivers but now I get code 31 (cannot find the driver software) in device manager and the connection doesn't work.
View 5 Replies View RelatedThe way i connect to my XP network is i open explorer and click on the Network folder icon. Then i wait for the green search bar to do it's thing at the top of the screen and when it detects the XP computer, it will show XP under Network and i can access it.Well it stopped. No matter how many times I clicked on Network the green search bar only searched once after a reboot and it would not find the XP drive.After searching I found that you could open the drive by typing in the start menu's search bar, \NAME. This worked fine, so I am able to access the drive but why don't it work with the Network folder in Explorer anymore? After I open the xp drive this way, it will then magically pop up under the Network folder but not before.Also is there a way to create a shortcut to this drive? I don't see that option by right clicking on it.
View 1 Replies View Relatedthe network icon to show up snd stay in mt tool bar tray on my windowsxp
View 3 Replies View Related1 week ago hamachi was working great until i decided to uninstall east smart security nod 32 and download and install the new version of the anti-virus.
i had like 8 unknown devices that the stupid firewall anti-virus nod32 has created and i by mistake i uninstalled the hamachi network adapter drivers and since then i can't install any virtual network drivers at all even Tunngle wont install his drivers.
today i cleaned all my register with some program and i have deleted all the stupid nod 32 firewall drivers and i have uninstalled hamachi software and installed it again and its the same.
please help how can i let my stupid windows 7 install the network adapter drivers for hamachi
and yes i have the latest version of hamachi.
Just reformatted my alienware laptop because I haven't used it in months. Now I don't even see "Network Adapter" listed under device manager so when trying to install the driver i don't think it had any effect. Running m15x windows 7 home premium 64 bit.
View 12 Replies View RelatedMy desktop connects to my router via a netgear N300 wirelss USB adaptor. Also connected to my router is my media server PC which has a shared network drive. On bootup My desktop looks for the mapped network drive before it loads the USB. So it always shows the network drive as being unavailable. This is soon sorted by double clicking on the network drive icon. Is there a workaround so that the PC looks for the network drive after loading the USB network has been established?
View 1 Replies View RelatedI cannot for the life of me get my internet to work.. more specifically it keeps telling me I need to install network drivers.I checked BIOS and LAN settings are all good.I've tried installing a realtek driver update.On my device manager not the network adapter tree does not even show up. I've done 2 full re-installs of windows 7 and no luck.I'm using an ASUS M4A89GTD PRO mobo, running windows 7 Ultimate 64bit.
View 9 Replies View RelatedThe Network Drive volumes do not show up in Windows Explorer using Windows 7. The network drives appear with the assigned drive letter followed by Network Drive, for example, (Q Network Drive I've checked and the volumes are labeled correctly on the servers. Is there a registry entry that needs to be modified in order to correct?The system is a Toshiba R830 laptop running Win 7 64-bit
View 5 Replies View RelatedI have strange problem with my windows 7 ultimate.
My network is okay and no problem on Internet and network from my 2 computer but:
1 - the icon in system tray show broken connection:
2 - in system hardware all network are okay
3 - in network preferences only 1 is present
i try to UN-install all the network, so windows recognized these at startup but nothing..
I have a peculiar network setup that causes me to require two routers.My laptop connects to router B, which then connects to router/adsl-modem A.
{Internet} ===MTU:1460===> [A] ---MTU:????---> [B] ===> Laptop
I have set up router A with all the correct settings provided by my ISP, one specifically being the MTU of 1460.I now need to know what I should set router B's MTU at. Should it be the same at 1460, or the full network speed of 1500.
I am running Windows 7 RC 7100 (of course) and I'm wanting to get a network setup between two computers over two routers. Here's my story:
I just moved in with two of my friends and we have 6 computers (3 laptops and 3 desktops) and we have 2 360s and 1 ps3. So needless to say my friends 5 port router wasn't enough for all the equipment so we decided to use my router with his.
Now after a day of configuring we have it running smooth and playing games with no troubles but there is one problem we want to access media on the ps3 from all the computers. I can access my media from the ps3 no problem since I'm on the same router as it but I can't access my friend media because he is on the 2nd router.
We have two belkin routers the main one has my friends PC, his 360, his ps3, and my router connected to it. My router has the remaining two pcs and my ps3 connected to it. Does anyone have a solution to this problem? I have tried putting the systems on one work group but that failed.
I also tried connecting to one homegroup but I can't detect his group and vice versa. If anyone could tell me how to set this up I would be grateful. My friend thinks it's might involve the routers DHCP but I'm not sure.
I am planning on holding a LAN Party in a month or 2 and requier a bit of help because it is my first. About 6 - 10 people will be coming.
I need help on a few things and any imput people could put in would be greatly appreciated because I am very lost!
I was planning on purchasing a switch (Still not sure what to purchase yet. I am looking for something around 10 ports) and connecting it directly by a network cable to my Belkin Wireless G Universal Range Extender Router. Then connecting all the computers to the switch. All the computers connected to the switch will be running either XP, Vista or 7.
Is this going to work? What kind of settings am I going to need to change on the OS's to make them all be able to interact with each other in the games. Are their easier ways to do this?
I have no previous networking experience and am only 14, so go easy.
my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3
802.11n wireless router: is this hardware supported by all windows operating systems?I am planning to buy one for my brother, he is using windows XP. I am using Windows 7, and my brother in-law is using windows Vista. We all play WoW or Heroes of Newerth together in my bro's house. So I am wondering if this would work for all the three computers. Also my brother who has XP is using a Desktop.Does it need any Wireless adapters for it to recognize the signal from the router?
View 5 Replies View RelatedMy Router is dying ( Always needs re-booting ), so i decided to get a new one, after some reading i found that N routers are the Top now, but you need a laptop that support N routers . My question is how can i know if my laptop support A G or N routers .
Laptop : Dell Inspiron 1545
Network adapter : Dell Wireless 1397 WLAN Mini-Card
Marvel Yukon 88E8040 PCI-E Fast Ethernet Controller
OS : Windows 7
I have 2 wireless routers/switches in my house. I have a router downstairs and one upstairs My setup is currently like this Downstairs: Computer Printer Modem Upstairs computer HTPC (media center pc) I use the printer on the downstairs computer to print everything, and this used to work fine until I installed a new router upstairs. My old setup was that upstairs I had a wireless router, and a separate switch, and the router was feed internet through the switch. Now that I installed a router/switch combo, I cant see any computers except for whats directly connected to the upstairs router.
View 4 Replies View RelatedI have a netgear router wgt624 v2. I've had it since 2003 or 04. when I got it my network seemed to be fast and connections to it quick.now sometimes my wireless seems to have a moment or two where it searches for a connection. I figured that was due to all of the neighbors who now have wireless too. and sometimes now devices are having ip conflicts. for example my printer is set to use a static ip and the router will often give that ip to my laptop. so then the printer will not work unless I restart the laptop.
View 9 Replies View RelatedHow can I be connected to multiple routers? So I can, for example, have one wired connection and maybe two wireless connections? Do I have to have many network cards, or can I use a program or so?
View 5 Replies View RelatedMy Nephew has a very long house and a computer cannot get a signal from the wireless router which is at the other end of the house. He doesn't want to run RJ45 cables. Could he use 2 routers so the second one connects wireless to the first one which is connected to his adsl phone socket by a ethernet cable. If so how would I go about setting them up, settings wise. If so would the computer also be able to talk to each other to be able to transfer files etc to each other.. (enable workgroup & sharing drives/folders) I know how to setup this bit.
View 4 Replies View RelatedWhat is the process that goes on when data is transmitted between two routers?
View 2 Replies View RelatedI'm having to write this because my old bridged network worked so well for so long that I totally forgot how I ever set it up in the first place, but I recall that it was simple and involved:
- The two were connected via wifi - the primary one having a physical connection to roadrunner modem
- The two had the same SSID, same Security method and passkey, different base IP addresses [192.168.1.1, and 192.168.1.21]
- beyond that it gets hazy... what "mode" was the secondary in? somewhere I input to the subordinate router the MAC address of the primary router... dunno where/which field accepted that
- do both need to be set to a fixed & same channel, as opposed to variable/Auto?
- what all was turned off on the secondary?
- both had full use of both their wired connections/clients and wifi
- one of these is N-300mbps, and g/b, the other is g/b. do I need to limit anything?
Its not necessarily important to me that the connected devices all share with one another - I have strange clients anyway and its not needed. the windows 7 devices will be ok on the homegroup.
I have a wireless router linksys connected to the modern witch is on the second floor. I want to connect another router linksys on the same network that the one on the second floor is on, wirelessly without any cords on the first floor.
View 15 Replies View RelatedI noticed a few days ago that I cant access my router anymore "http://192.168.1.1/"I had some network problems so I uninstalled hamachi. Ethernet 24mbps connection crashes every 10mins~There's the thread I made, and all of the changes I did I posted there. So if you read the thread. When I got back home and after few days I noticed that I can't connect to the router anymore. ipconfig just displays some random "85.157.0.1" which doesn't work.
View 9 Replies View RelatedI earlier (roughly 6months ago) made a topic about this. (Can't access routers webpage / control page anymore.)
I recently got a brand new computer with a fresh copy of Windows 7 Pro 64-bit SP1 and the same problem is still there. The problem is: I can't access the routers webpage when I'm using ethernet. It's fine when I'm using wireless, but the thing is I don't have a adapter built in to the pc, so I had to use a USB adapter which my brother took.
So, I'm stuck with the ethernet cable. I got two cables, both of them give the same results, so atleast it shouldn't be the cable or such. Also, I can easily access the page on my mobile and laptop.
My laptop was hooked up by broadband cable to the faceplate and was working fine, but now both cabled and wireless internet don't work, however I can connect to wifi on mobile. The troubleshooter does not run, it just reads error. I bought a brand new cable but still no luck, have tried undoing system updates but it has merely made it worse
View 2 Replies View Related