I've got a new BenQ G2420HD series LCD monitor and an HD enabled, windows seven ultimate, 64bit pc. However, when I connect my monitor to my PC using HDMI, my PC detects it (I've checked with a second monitor), it knows the name of it and can change the resolution etc. quite happily but no display shows on the monitor. The monitor just says 'no cables connected'. It works fine if I connect it with a DVI cable (haven't bothered trying VGA) but I want HD!
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D Windows 7 home premium 64-bit AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU Chipset : Intel G41 Processor : Intel Core 2 Duo E6420 @ 2133 MHz Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM ) Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1) Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
i'm having problem when opening inbox from my ymail .this message come out "an add on for this website fail tO run.check the security setting in internet option for potential conflicts".
I just recently bought an Acer Aspire 5532 from a friend of mine. Everything was working fine for days, until I powered down using the power button rather than the shut down button on-screen. Ever since then, when I turn on the computer it reads "Windows failed to start. A recent hardware or software change might be the cause." I have the options to either 1. launch startup repair (which freezes the computer) or 2. Start windows normally (which takes me back to the start). I have no installation disk, I've tried safe mode (freezes) along with last good configuration?
Everytime I try to update my BIOS on my laptop I get this error: BIOS update failed!New Bios is not compatible with the current system BIOS. New BIOS part number doesn't match system BIOS part number. Error Code: -120See the for troubleshooting
I recently downloaded and installed a set of Windows Updates that came out on 4/26. I had about 8 of them. 4 of them installed successfully but 4 of them were downloaded and installed(on shutdown) but fail to configure on startup. The four I'm having issues with are:
KB2492386 KB2515325 KB2522422 KB982018
Each of these are updates for Windows 64-bit. I was wondering if anyone else was having issues with these as well. I plan on waiting a day or two and try again. I've tried twice today with no success.For future reference, what can cause an update to fail to configure?
Our laptop prompted a download and installation of SP1 Win7 and we pressed ok. The installation became stuck and warned do not shut down computer but it stayed in this state for over four hours. We had to "hard" boot the computer and on reboot it tried to install the new update. The system became stuck on " Fatal error C0000034 applying update operation 236 of 80331 (_000000...) " Then we started normally but the system identifies improper shutdown and runs system recovery (Lenovo) We choose "go to system recovery point" and after some time the system reboots and goes back to " Fatal error C0000034 applying update operation 236 of 80331 (_000000...).
I had a new external HDD WD My Book Essential USB 3.0 (2TB) 6 month ago. All was good until two days ago. I rebooted my computer and I won't boot up. After disconnecting WD HDD it work perfectly But after I turned my PC off, and tried to turn it on, again it won't boot up with the HDD connected AND some weird ticking noise started in HDD itself. I sounds like it's trying to boot but failing and trying again. So I disconnected, boot up the system and then plugged it in. Nothing Not in explorer, not in disk management not in Acronis program, nothing.I rebooted and it showed and Local Disk R, but I can't even start disk management or open it with explorer, or even open any program to be able to see/fix it. In the end, HDD wasn't even turning on.So the next day I called tech support of WD. They told me standard stuff, like "Disconnect, Reconnect Try another port, etc ". Nothing. By warranty they can replace it, BUT I don't care about the drive itself, I need data. In this case they can't help me. All they told me is to contact special company for that, and it's gonna cost me up to 1000$.After that call, I noticed a burning smell from HDD. It was connected to power and USB. I disconnected and I opened the case of my HDD. SATA HDD itself seams to be fine, but the connection board (with USB and power) burned.So, I connected directly via SATA to my PC. And that's when the fun starts: BIOS did not recognized it. I switched the SATA port. BIOS showed the model and everything but it gives me "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed." Reboot.In different software... NOTHING. Reboot again: and again "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed". Reboot. S.M.A.R.T. Command Failed... Reboot 5 times, all good. Started LiveBoot CD by Wondershare. It found my HDD and UNKNOWN. Was trying to recover data from it, program freeze. Reboot again. Was trying to fix mbr with Win 7 Boot Cd, nothing cuz it can't see were to fix mbr. Reboot. Started HDAT2. Nothing. Reboot 10 times, and HDAT2 finally can see my HDD. Before I start any test I shows me read error from UNKNOWN DEVICE. Started "hdat2 most powerful test". Nothing. No errors was found. O_o. Also I try Read MBR with the same HDAT2. Everything 0/0/0/0. So what else I can possibly try?? Oh yeah, when I connected my HDD via SATA, that "boot or not to boot" sound was still there.
Yesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
My laptop has been working fine for two or three months now, until today when I restarted it and suddenly could no longer use my USB mouse. Then I realized I had no WiFi signal, so I plugged into ethernet, and still had no internet connection. Most of my drivers seem to be broken, with my laptop functioning only as it would after freshly installing Windows, before actually installing any drivers.I managed to eventually find a way to install the WiFi drivers, and then the rest of the missing drivers, and restarted my computer to make sure everything was fine. The exact same thing happened again. Any idea what is wrong and how I can fix it without doing a fresh install? I don't currently have access to my backup drives so I'd lose a lot of stuff if I had to reinstall Windows.
I'll try to make sense of this to you. My computer has been working great until last night. Today, it bricked on me.Last night and until a out noon today, I was seeing occasional corruption of the image on screen (strange blocking/pixellation like a bad hd tv picture). I started getting locking-up freezes, which I could sort of unfreeze with ctrl-alt-del. This happened frequently while browsing the net las night (oddly games worked fine).Today at one point the whole image started flickering/fluctuating up and down and then the image scrambled totally and was locked-up, so I hard reset.Upon restart, bootup fails. Chkdsk, memory scan (from startup repAir and the installation disk), image and system recovery fail. When I read the detailed results from start up recovery, it tells me that no drive is present.So, did the drive fail, or maybe it came unplugged inside the tower (unlikely bc the tower hasnt moved). Or, did intel smart response technology screw up and the cache is screwed and it's messing up the primary drive it accelerates? Windows 7 64-bit OS on z68 mobo with 64gb SSd accelerating 500gb primary.
After reboot I get BSOD with 0x0000003B; 0xC0000000C0000005; 0xFFFFF8801893FA1; 0x0000000000000000; and TCPIP errors. Using system retore in safe mode has broken Net Framework 2 with error message unable to load sorttbls.nip or one of its dependancies. ATI Catalyst Control Centre and windows troubleshooter no longer work.
I'm working with an Acer 9920 Laptop, with win 7 u installed. Until quite recently everything worked well. But now I have problems. For instance I want to install some software by doubleclicking on the msi file I see in Windows Explorer. After entering Admin credentials I get a message that the file I'm just seeing in WE cannot be found.Similarly, when I want to edit extended system properties, C: Windows system 32systempropertiesadvanced.exe cannot be found.Something apparently related is that when I want to start Eclipse which is a Java app the system fails telling me that no client JVM at xxx can be found.When I log in as an admin everything seems to work right.
Recently I just tried starting my computer on and it wouldn't boot. I left my computer in locked mode then it eventually went to sleep. I kept trying to restart it and had no luck, I checked inside the cpu was running and the dvd drive was still able to open and close. My USB mouse or keyboard weren't powering on though neither was my monitor showing anything I didn't hear any beeps. So I kept disconnecting the power outlet from the wall since that's the only way I could restart it.
Yesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
For some reason the network from point A to B keeps failing. Going to explain the set up I have right now. DSL and modem are in room 1 then that plugs into the wall to the switch in room 2. Many things are connected to the switch, roku player, dish network receiver and other Ethernet connections for other rooms and a router so we can get wifi. Now for some reason the connection from the switch to the modem keeps going out. The internet works just fine because i can plug the ethernet cable from the modem directly to a computer in the office. However from a computer in another room I cannot cmd ping the modem says 0%. What would cause this to fail, it works for hours then i have to unplug/re-plug the cables to get it working again.
I have a new desktop touchscreen, sony. It has windows home premium installed. However, in the course of trying customization of my new computer, I can't get FULL ADMINISTRATOR privileges. the only way I know is when I try to use my spybot search&destroy shredding program, it says I don't have administrator privileges. I have searched, retried settings, and just when I thought I had the settings right--- I get a message: "you need administrator privileges for access.
I tried Win 8 but had problems with Flight Simulator so returned to Win 7. Since doing a clean re-install of 7 I've had issues with programs failing to start for one reason or another. Live Mail for example will run fine for a few days and then suddenly will not run giving the message "the version of this file is not compatible with the version of windows you are running......etc"
I wanted to setup a VPC starting with an image of my laptop but I'm having great difficultly, I'm running Windows 7 home premium x64.I started by using Acronis true image to take an image of my PC (a .tib). I then used Acronis true image to convert that to a vhd, however when trying to create a VPC using the vhd got a message that the vhd could not be attached. After some research I found that it was because the partition I imaged was 320GB and Windows Virtual PC could not handle it. Using diskpart I reduced the vhd partition size then using Vhd resizer to reduce the size. I was able to attach the vhd and start the virtual machine but received a message from Windows Boot Manager "The boot selection failed because a required device is inaccessible", so I inserted the Windows home premium x64 DVD into the dvd drive but the virtual machine would not boot from it.
I could not do anything so I decided to start a new virtual machine and try and install windows from scratch. I created a fixed sized vhd using Windows Virtual PC, I inserted the Windows DVD into the drive and booted the virtual machine. This time virtual PC would allow me to boot from the DVD drive however I receive an error "Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode" but this is the version of Windows I am running on my PC.I have also downloaded Securable to ensure that Windows Virtual PC will work I get a maximum bit length of 64 and Yes for both hardware D.E.P and Hardware Virtualization.
When booting upduring POST, I get a "floppy drive fail (40)" error code. I have to use F1 to get to the desk top. I do not have a floppy drive! I have replaced the cmos battery on the mother board. When I access floppy drive in the removable device priority menu, click,nothing! I get no sub-menu to disable it.
So what happened was yesterday AVG detected a virus on my computer and asked if I wanted to get rid of it. I clicked remove or whatever it was and forgot about it. However, every 2-3 minutes it mentioned another virus needed removal on my computer. I ran a scan twice and said it was clean.
So I thought about trying to use a different antivirus program. I downloaded MSE and ran a scan. It detected some kind of trojan virus so I removed it and was glad thinking that this was the hidden problem. MSE told me to restart the computer to finish the clean up or whatnot, so I restarted the computer.
However, now when my computer is loading, I'll reach the first Windows 7 screen showing the symbol, then my computer will automatically restart. As if I clicked the reset button. I tried using the startup repair but it could not fix the problem. I also tried the restore windows at a earlier point, but the computer still faills to reach the desktop. I read somewhere that I should try to access the desktop in safemode, but the same "reset" problem occurs when I try to make it to safemode.
Please if anyone could help me fix this problem I would greatly appreciate it. I did not delete AVG so I had 2 antivirus programs (AVG and MSE), and someone told me that could be the problem and to delete 1 of the antivirus programs, but I cant even get to the desktop to do so. I have windows 7 64-bit. Prior to this, the computer was working fine. I was thinking of reformatting the computer but I rather not lose everything I have on the computer unless its the only option left.
Windows 7 ultimate 64 bit running on an CR410-M motherboard HP Pavilion media centre desktop PC, model: Asterope-GL8E... the device software code: AWY0001 cannot load driver for this "Unknown device"
I have a Gateway NV53 and cannot get to start. I have tried system restore, factory restore, every way i know to start and cant get past error code. I DO NOT have a win 7 install disk so i feel i am stuck ? I tried a system image from my Toshiba, a repair disk for win 7 all to no avail
Well first off, I am running Windows 7. Its been the best to me except one thing. My printer only has 32 bit drivers and I have a 64bit OS. What I did was partition my drive and install Windows XP home on that partitioned drive. The installation was successful except that XP was now the only only thing that was bootable. I couldn't multiboot. It would always start in XP. To make things worse, I couldn't even go online on XP.
I had found a solution to dual boot but it required me to download something from windows update. Even if I was able to dual boot, I still wouldn't be able to go online. So I put my Win 7 disk and repaired it which made windows 7 my boot again. Then I deleted my whole windows xp partition (I hope that doesn't damage it)
So... Now I need help. I want to try to install xp again but I want win 7 to be my main boot instead of xp taking over like it did. Also not being able to connect to the internet with xp. What could be the problem?
