Windows 7 Installation Fail
Mar 26, 2011
Yesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
View 3 Replies
ADVERTISEMENT
Mar 26, 2011
Yesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
View 1 Replies
View Related
Nov 12, 2012
I have AMD X2 4600+M2N68 AM SE + 2gb Trancend 667 Mhz Ram.I am unable to install any version of win 7 on this config..Should anyone will guide in this problem?
View 3 Replies
View Related
Feb 16, 2012
I've installed Ubuntu 11.04 on my notebook ASUS U36SD. It worked perfectly fine for 4 months. Recently, I decided to install the last version of Ubuntu, 11.11. From now, Windows 7 doen't want to boot: It freezes at the boot screen. I tried to use the repair mode, but it failed. I also tried the safe mode. It still does't boot and freeze when loading CLASSPNP.SYS.
View 3 Replies
View Related
Jun 15, 2010
The computer goes blank right after Windows starts up as it's supposed to go to the login screen, and the cursor was the only thing to appear. My answer to everything is to basically reinstall Windows 7 and start over, but after inserting the disc, begining the installation, and going through most of the motions....after Windows restarts again the screen goes black. Before I tried to reinstall Windows I was able to use the computer in Safe Mode, but after the reinstallation failed I can't reach safe mode. I can't seem to find a way to finish the installation.
View 6 Replies
View Related
Oct 25, 2011
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies
View Related
Sep 16, 2012
Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies
View Related
Jun 24, 2011
I just recently bought an Acer Aspire 5532 from a friend of mine. Everything was working fine for days, until I powered down using the power button rather than the shut down button on-screen. Ever since then, when I turn on the computer it reads "Windows failed to start. A recent hardware or software change might be the cause." I have the options to either 1. launch startup repair (which freezes the computer) or 2. Start windows normally (which takes me back to the start). I have no installation disk, I've tried safe mode (freezes) along with last good configuration?
View 2 Replies
View Related
Apr 30, 2011
Our laptop prompted a download and installation of SP1 Win7 and we pressed ok. The installation became stuck and warned do not shut down computer but it stayed in this state for over four hours. We had to "hard" boot the computer and on reboot it tried to install the new update. The system became stuck on " Fatal error C0000034 applying update operation 236 of 80331 (_000000...) " Then we started normally but the system identifies improper shutdown and runs system recovery (Lenovo) We choose "go to system recovery point" and after some time the system reboots and goes back to " Fatal error C0000034 applying update operation 236 of 80331 (_000000...).
View 3 Replies
View Related
Nov 13, 2011
I'll try to make sense of this to you. My computer has been working great until last night. Today, it bricked on me.Last night and until a out noon today, I was seeing occasional corruption of the image on screen (strange blocking/pixellation like a bad hd tv picture). I started getting locking-up freezes, which I could sort of unfreeze with ctrl-alt-del. This happened frequently while browsing the net las night (oddly games worked fine).Today at one point the whole image started flickering/fluctuating up and down and then the image scrambled totally and was locked-up, so I hard reset.Upon restart, bootup fails. Chkdsk, memory scan (from startup repAir and the installation disk), image and system recovery fail. When I read the detailed results from start up recovery, it tells me that no drive is present.So, did the drive fail, or maybe it came unplugged inside the tower (unlikely bc the tower hasnt moved). Or, did intel smart response technology screw up and the cache is screwed and it's messing up the primary drive it accelerates? Windows 7 64-bit OS on z68 mobo with 64gb SSd accelerating 500gb primary.
View 14 Replies
View Related
Aug 20, 2011
After reboot I get BSOD with 0x0000003B; 0xC0000000C0000005; 0xFFFFF8801893FA1; 0x0000000000000000; and TCPIP errors. Using system retore in safe mode has broken Net Framework 2 with error message unable to load sorttbls.nip or one of its dependancies. ATI Catalyst Control Centre and windows troubleshooter no longer work.
View 1 Replies
View Related
Jul 19, 2009
Recently I just tried starting my computer on and it wouldn't boot. I left my computer in locked mode then it eventually went to sleep. I kept trying to restart it and had no luck, I checked inside the cpu was running and the dvd drive was still able to open and close. My USB mouse or keyboard weren't powering on though neither was my monitor showing anything I didn't hear any beeps. So I kept disconnecting the power outlet from the wall since that's the only way I could restart it.
View 9 Replies
View Related
Aug 17, 2011
I wanted to setup a VPC starting with an image of my laptop but I'm having great difficultly, I'm running Windows 7 home premium x64.I started by using Acronis true image to take an image of my PC (a .tib). I then used Acronis true image to convert that to a vhd, however when trying to create a VPC using the vhd got a message that the vhd could not be attached. After some research I found that it was because the partition I imaged was 320GB and Windows Virtual PC could not handle it. Using diskpart I reduced the vhd partition size then using Vhd resizer to reduce the size. I was able to attach the vhd and start the virtual machine but received a message from Windows Boot Manager "The boot selection failed because a required device is inaccessible", so I inserted the Windows home premium x64 DVD into the dvd drive but the virtual machine would not boot from it.
I could not do anything so I decided to start a new virtual machine and try and install windows from scratch. I created a fixed sized vhd using Windows Virtual PC, I inserted the Windows DVD into the drive and booted the virtual machine. This time virtual PC would allow me to boot from the DVD drive however I receive an error "Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode" but this is the version of Windows I am running on my PC.I have also downloaded Securable to ensure that Windows Virtual PC will work I get a maximum bit length of 64 and Yes for both hardware D.E.P and Hardware Virtualization.
View 9 Replies
View Related
Oct 10, 2011
So what happened was yesterday AVG detected a virus on my computer and asked if I wanted to get rid of it. I clicked remove or whatever it was and forgot about it. However, every 2-3 minutes it mentioned another virus needed removal on my computer. I ran a scan twice and said it was clean.
So I thought about trying to use a different antivirus program. I downloaded MSE and ran a scan. It detected some kind of trojan virus so I removed it and was glad thinking that this was the hidden problem. MSE told me to restart the computer to finish the clean up or whatnot, so I restarted the computer.
However, now when my computer is loading, I'll reach the first Windows 7 screen showing the symbol, then my computer will automatically restart. As if I clicked the reset button. I tried using the startup repair but it could not fix the problem. I also tried the restore windows at a earlier point, but the computer still faills to reach the desktop. I read somewhere that I should try to access the desktop in safemode, but the same "reset" problem occurs when I try to make it to safemode.
Please if anyone could help me fix this problem I would greatly appreciate it. I did not delete AVG so I had 2 antivirus programs (AVG and MSE), and someone told me that could be the problem and to delete 1 of the antivirus programs, but I cant even get to the desktop to do so. I have windows 7 64-bit. Prior to this, the computer was working fine. I was thinking of reformatting the computer but I rather not lose everything I have on the computer unless its the only option left.
View 4 Replies
View Related
Dec 21, 2012
i am havin problems with my updates on windows 7 they get to 15% and fail and it restarts every time i try and update so it doesnt do any at all. its a laptop im on and using windows 7 ultimate
View 2 Replies
View Related
Aug 13, 2011
Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
View 3 Replies
View Related
Jul 9, 2011
I am running windows 7 32-bit and a few days ago I installed a windows update. When my computer restarted it entered the loading screen, but then the screen went black and after failing to load windows, gave me the option to start system repair. I did, and was subsequently able to run system restore, which took me back to before the update and my computer started normally again. I turned off automatic updating, but today when I restarted my pc the update installed again. Tried running startup repair, but there is no more option to enter system restore. When startup repair finishes, it says it can't automatically fix the problem. Upon entering advance restore options and selecting system restore, it indicates that the specified action could not be located and in any other instance says that system restore is offline.
View 2 Replies
View Related
Oct 2, 2011
recently I've been noticing Windows 7 doesn't even automatically check all the updates it claims are important. Yes, I have it set to install Windows Updates automatically, but this would still prompt me to "start" the updates.I'm pretty sure it has something to do with my having Microsoft Office 2003 (the 2003 version of MS Word, Excel, PPT, etc.) but, that's not an excuse. They're prompting me to install updates for my software they're JUST releasing, and yet they fail seemingly almost every time? Do they even test the sh!t they release to the public?And how come sometimes they'll install if I manually do it myself as opposed to when I try doing it automatically? Why should it be any different?
View 3 Replies
View Related
Mar 8, 2011
I've recently been directed here from the Malware forum . I am having corrupted files which now are malware-free and I tried to do a upgrade reinstall to my system . However , at the final stage where my files are being transferred back, the updates fail and my windows is rolled back .Could someone please help me on how to solve this? I would like to reinstall windows 7 without losing my data .I am holding the Windows 7 Ultimate 32bit Upgrade CD which I've got from the Dell Upgrade program.I've uploaded the windows compatibility report ( it was the report i found on the desktop after the failed install)
View 14 Replies
View Related
Jan 12, 2012
Lastnight upon shut down, my laptop had updates to deal with so I went to sleep. I fired it up this morn and it did what ever it does with those updates... Since then I have nad no touch pad. I tried the Fn/F9 and that was not it... so I checked in control panel etc... Got to the screen where I check/uncheck "disable for external device" or similar wording... Couldn't check/uncheck as it was not highlighted/activated... windo in that box was blank not showing a device at all...
View 2 Replies
View Related
Jul 14, 2012
i am using lenovo i3..this one is o new but its not working,says windows cannot start and tries itself to repair but i dont get any slution..
View 1 Replies
View Related
Nov 26, 2012
I had 2 computers last week with auto updates on, mcafee vse 8.7i enterprise administered through epo. get a failure to authenticate windows. Ran MS offline scanner, no malware, multiple warnings not a legal windows installation, update fails, system restore fails, then reboot and bsod. No f8 for safe mode. The only 2 win 7 computers with auto updates turned on exhibited this behavior. Complete reinstall of course, anyone else have the same problem?
View 2 Replies
View Related
Sep 24, 2012
FYI: On last shut down of system on 9-24-2012(win7 ultimate) windows update installed KB2538243. When starting system back up several hours later, window's would not start. Started in safe mode, used system restore, all ok for now! Checked recent updates and found that the above update "failed to install" and was the only update listed.
View 3 Replies
View Related
Jun 29, 2011
I'm using Windows 7 64bit Professional and failed to update x64-based KB2552343. Reported error is Code 800B0100. I strictly followed the solution mentioned What is the System Update Readiness Tool? But nothing changed, still the same error.
View 2 Replies
View Related
Jan 26, 2012
I am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever. I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having.
YES, I have disabled my antivirus program already and they still fail.
YES, I am logged in as the administrator and I have all the necessary privileges.
YES, I have used Windows' crappy troubleshooter.
YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
View 9 Replies
View Related
Sep 20, 2010
Up until about a week ago my computer was happily running along until all of a sudden - POW! A good chunk of my games no longer launch. This happened to me back in the Windows 7 beta and it was only (partially) solved when I formatted and did a clean install of the retail version. Now that it is happening again I'm just like "screw it - format now and not waste 2 months trying to fix it.Issue seems to be: Can't update GFX drivers (Tried Driver Sweeper etc. Doesn't make a difference)Can't launch a good deal of my games (most of them the affected ones use OpenGL If I could fix that, it would save me formatting but last time I scoured the internet far and wide to try and fix it to no avail."But", you say, "just format and be done with it!"The install begins fine, it extracts all the files and gets to the first reboot. After about 3-5 mins of it progressing through the final stages of the install the screen goes blank and nothing happens (HDD and disk drive both idle even after 30 mins). Presumable its installing the graphics card driver.I had this same problem last time (From beta to retail) and I did find a solution which I can't remember exactly.I was certain it was from these forums (Which is why I'm posting here) but after a good search of these forums and the rest of the general internet I couldn't find the same instructions. Incase it rings any bells with anyone, it involved something like so:Do the first stage of the install At the first reboot enter safe mode Shift+F10 to open command prompt Open device manager and remove graphics card driver (or disable card)Reboot and continue install The only problem I ran into this time is that it wasn't loading into safe mode (it got up to loading disk.sys, the second last file it normally loads, and stops there) unless I first continue the install up to the point where where the screen goes blank, but then after I disable the card and boot normally to continue the install it says it encountered an error and makes me start it over?tl;dr: Can't update/install graphics card drivers normally or during during Windows 7 install.
View 9 Replies
View Related
Aug 23, 2011
I have an Acer Aspireone D255E Netbook, with Windows 7 Starter. I decided I wanted to restore the computer to factory default, and keep my User files. It ran all the way through until it said "Setup is starting services" then it said "Windows can not install this software to this hardware." This confuses me because it was working all the time, I never updated any hardware. So it gave me an option to restart the system and I do so. Then if I do nothing, it just continues looping to the "setup is starting services" screen and then the reboot. I tried pressing F8 to run system restore again, and get it back to factory default, but system recovery is not an option anymore. I tried loading in safe mode, and it wont load. I tried other options on the F8 boot menu and it all basically said to restart. This netbook doesn't have a cd or dvd drive. I do not have any flash drives. Does anyone have any suggestions on how I could restore to factory default without purchasing a new dvd, cdrom, or flash drive? Or perhaps an alternate way to load DOS so I could delete whatever step its at on the installation so it could put the "Repair windows" option so I could run the factory restore?
View 2 Replies
View Related
Jan 26, 2012
I am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever.
I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having. I have searched google and NO solution helps me.
YES, I have disabled my antivirus program already and they still fail.
YES, I am logged in as the administrator and I have all the necessary privileges.
YES, I have used Windows' crappy troubleshooter.
YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
View 9 Replies
View Related
Jun 14, 2011
My friend has had this laptop for the past year or so, March 2010; and just recently her laptop decided to stop booting. Every time I try to boot windows it gives me a BSOD. All I have is the boot/repair disk from 2010; however it isn't working properly when I try to repair the OS or boot from the disk. It's a toshiba and it came with a repair program, but it also removes data on the HDD. Is there a link to a proper boot disk that I can maybe download to a flash drive and boot from there and repair? Or is there at least an easy way to pull the information off of her HDD before using the Toshiba program? Is it possible to just plug in the laptop to my computer, turn it on and access it from my personal computer? I also have an OEM version of Windows 7 from when I built my own computer, can I use that to repair her OS or will it recognize that it's not the same computer and fail? I know, lots of questions, you don't have to answer them in sequence, just tell me what would work best .
Note: She does NOT have a restore point on her laptop, I was able to get that far on my own before I decided to ask on this forum.
View 4 Replies
View Related
Aug 31, 2012
How to get UBCD4Win to load & run on a windows 7 O.S.?
View 1 Replies
View Related
Sep 18, 2010
I can't get my HP LaserJet 4 Plus parallel printer to work via USB to my new laptop with Windows 7 Premium 64 bit. My HP DeskJet 820 Cse doesn't work either.On eBay, I bought a USB to parallel printer cable adapter (Pluscom). Windows says it is working correctly, but nothing happens when connecting one of these two printers.First I tried to print with the LaserJet: nothing. Then the DeskJet: nothing. I'm even unable to edit the properties of the DeskJet: Windows tells me that the print spooler is not working (I don't receive this error message while choosing the LaserJet).A system restore to some days earlier (before I installed the printers) is also failing; Windows tells me this is because of antivirus (Avira free antivirus, up-to-date).
View 3 Replies
View Related
